• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.1
• /
• pp.7-13
• /
• 2018

In the current study, we proposed an optimized brain-computer interface (BCI) which employed blind source separation (BBS) approach to remove noises. Thus motor imagery (MI) signal and steady state visual evoked potential (SSVEP) signal were easily to be detected due to enhancement in signal-to-noise ratio (SNR). Moreover, a combination between MI and SSVEP which is typically can increase the number of commands being generated in the current BCI. To reduce the computational time as well as to bring the BCI closer to real-world applications, the current system utilizes a single-channel EEG signal. In addition, a convolutional neural network (CNN) was used as the multi-class classification model. We evaluated the performance in term of accuracy between a non-BBS+BCI and BBS+BCI. Results show that the accuracy of the BBS+BCI is achieved $16.15{\pm}5.12%$ higher than that in the non-BBS+BCI by using BBS than non-used on. Overall, the proposed BCI system demonstrate a feasibility to be applied for multi-dimensional control applications with a comparable accuracy.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.9
• /
• pp.598-605
• /
• 2014

In this paper, we suggest a modified slotted ALOHA algorithm for fast tag collection in active RFID system and implement the reader and tag operation using CC2530 chip of Texas Instruments Co. to prove the performance of the proposed algorithm. In the present international standard related with active RFID including ISO/IEC 18000-7 the reader sends sleep command to each tag after successful obtaining tag's information. Meanwhile, in this paper, the tags decide to sleep after checking the second command from the reader resulting in enormously decreased tag collection time. We tested the proposed algorithm with 30 tags over the range of 0-3m and the results showed that the tag collection process was completed in 400msec at average. And 30 tags are collected in one second with 99.7% and the collection rate is 100% in 2m distance between reader and tag. The collection rates are 99.94% and 99.7% for distance 2.5m and 3m, respectively. The average collection rate is 99.91% over all range and it is concluded that the proposed algorithm is enough to apply to real fields.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2006.06a
• /
• pp.46-66
• /
• 2006

새로운 지능기반사회(ubiquitous society) 패러다임이란 전제 아래 미국을 비롯해 일본, 유럽 등 세계 각국에서는 모바일, 브로드밴드, 극소형 컴퓨터, IPv6의 기술이 창출해 내는 컴퓨팅 혁명의 실체를 유비궈터스 IT로 파악하고 각 국의 걸부, 기업, 연구소들이 주도권을 잡기 위해 많은 노력을 기울이고 있다. 현재 유비쿼터스 IT를 활용한 u-비즈니스를 활성화하고 관련 시장을 선점하기 위한 전 세계적인 경쟁은 매우 치열한 양상을 보이고 있다. 주요 국가들은 서로 지향하는 영역은 다르지만 궁극적으로 지능기반사회 구현이라는 대명제 아래 독자적인 산업 구축을 위해 노력하고 있다. 이러한 이유는 기본적으로 지능기반사회로의 이행과정에서 발생하는 경제적 파급효과, 예컨대 디지털 가전, 이동통신기기, 전자의료기기, 디스플레이, 2차 전지, 보안 등 관련 산업에 미치는 영향 및 새로운 시장 창출의 기회가 있기 때문이다. 기존의 많은 연구 및 문헌에서는 아직도 유비쿼터스 IT에 대한 개념적인 논의에 치중되어 있고 시장 중심적 또는 수요자 중심적 사고의 논의가 부족하다. 성공적으로 유비쿼터스 산업을 육성하기 위해서는 유비쿼터스 IT자체기술 개발사업(tangible service) 뿐만 아니라 비가시적(intangible) 서비스, 그리고 컨버전스(convergence) 서비스에 대한 상용화 모델과 성공적 사업 전개 방법론에 대한 깊은 연구가 수행되어야 한다. 본 연구에서는 먼저 유비쿼터스 IT의 기술동향과 시장 동향 및 산업 규모에 대한 문헌연구를 통해 u-비즈니스의 가능성을 고찰해보고, u-비즈니스 추진 전략을 탐색적으로 제시하고자 한다.되었다. SPME-GC/MS에 의한 휘발성분 분석 결과, 기능성 유지에서 홍국쌀 에탄올 추출물로부터 기인되는 특유의 휘발성분은 관찰되지 않았으나, RT=12.1 min인 hexanal의 함량이 control에 비하여 유의적인 감소 경향을 나타내는 것이 확인되었다(p<0.05).히지 못하여, 이의 기전을 밝히기 위한 추후 연구가 필요하다./TEX>로서 p<0.01 수준에서 현저히 증가하였다. 혈청의 인지질과 콜레스테롤 에스테르의 지방산 조성에서 vitamin C를 혼합 투여한 3,5,7군에서 PUFA 함량이 증가한 반면, SFA 함량은 감소하여 P/S 비율, n-3P/n-6P 비율은 증가하는 경향이었으며 이는 간장의 인지질, 콜레스테롤 에스테르, 총 지질의 지방산조성에서도 같은 경향을 볼 수 있었다.X>$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 대부분을 차지하였다. 야생 돌복숭아 과육 중의 지방산 조성은 포화지방산이 16.74%, 단불포화지방산 17.51% 및 다불포화지방산이 65.73%의 함유 비율을 보였는데, 이 중 다불포화지방산인 n-6계 linoleic acid$(C_{18:2})$와 n-3계 linolenic acid$(C_{18:3})$가 지질 구성 총 지방산의 대부분을 차지하는 함유 비율을 나타내었다.했다. 하강하는 약 4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것

• Korean Journal of Community Nutrition
• /
• v.27 no.3
• /
• pp.245-253
• /
• 2022

Objectives: This study was conducted to find out if the dietary iron intake of Koreans estimated by 2 different methods (iron content sources) using the food intake data from the Korea National Health and Nutrition Examination Survey (KNHANES) are comparable. One method was based on the KNHANES's Food & Nutrient Database (FND) derived mainly from the Korean Food Composition Table and the other used the iron content (IC) of food samples processed in the Korean Total Diet Study (KTDS). Methods: Dietary intake data from the 2013-2016 KNHANES was used to select representative foods (RFs) in KTDS for iron analysis. Selection of the RFs and cooking methods for each RF (RF × cooking method pair) was performed according to the 'Guidebook for Korean Total Diet Studies' and resulted in a total of 132 RFs and 224 'RF × cooking method' pairs. RFs were collected in 9 metropolitan cities nationwide once or twice (for those with seasonality) in 2018 and made into 6 composites each, based on the origin and season prior to cooking. Then, the RF composites prepared to a 'table ready' state for KTDS were analyzed by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Dietary iron intake of the Korean population was estimated using only RFs' intake data based on the 2 sources of iron content, namely FND-KNHANES and IC-KTDS. Results: RFs in KTDS covered 92.0% of total food intake of Koreans in the 2016-2018 KNHANES. Mean iron intake of Koreans was 7.77 mg/person/day by IC-KTDS vs 9.73 mg/person/day by FND-KNHANES. The major food groups contributing to iron intake were meats (21.7%), vegetables (20.5%), and grains & cereals (13.4%) as per IC-KTDS. On the other hand, the latter source (FND-KNHANES) resulted in a very different profile: grains & cereals (31.1%), vegetables (16.8%), and meats (15.3%). While the top iron source was beef, accounting for 8.6% in the former, it was polished rice (19.2%) in the latter. There was a 10-fold difference in the iron content of polished rice between 2 sources that iron intakes excluding the contribution by polished rice resulted in very similar values: 7.58 mg/person/day by IC-KTDS and 7.86 mg/person/day by FND-KNHANES. Conclusions: This study revealed that the dietary iron intake estimated by 2 different methods were quite comparable, excluding one RF, namely polished rice. KTDS was thus proven to be a useful tool in estimating a 'closer-to-real' dietary intake of nutrients for Koreans and further research on various nutrients is warranted.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.69-79
• /
• 2016

Lithium ion battery with high energy density is expanding its application area to electric automobile and electricity storage field beyond existing portable electric devices. Such expansion of an application field is demanding higher characteristic and stable long life characteristic of an anode material, the natural graphite that became commercialized in lithium ion battery. This thesis produced cathode by using natural graphite anode material, analyzed creation of the cathode SEI film created due to initial reaction by using electrolyte additives, VC (vinylene carbonate), VEC (vinyl ethylene carbonate), and FEC (fluoroethylene carbonate), and considered correlation with the accompanying electrochemical transformation. This study compared and analyzed the SEI film variation of natural graphite cathode according to the electrolyte additive with SEI that is formed at the time of initial filling and cathode of $60^{\circ}C$ life characteristic. At the time of initial filling, the profile showed changes due to the SEI formation, and SEI was formed in No-Additive in approximately 0.9 V through EVS, but for VC, VEC, and FEC, the formation reaction was created above 1 V. In $60^{\circ}C$ lifespan characteristic evaluation, the initial efficiency was highest in No-Additive and showed high contents percentage, but when cycle was progressed, the capacity maintenance rate decreased more than VC and FEC as the capacity and efficiency at the time of filling decreased, and VEC showed lowest performance in efficiency and capacity maintenance rate. Changes of SEI could not be verified through SEM, but it was identified that as the cycle of SEI ingredients was progressed through FT-IR, ingredients of Alkyl carbonate ($RCO_2Li$) affiliation of the $2850-2900cm^{-1}$ was maintained more solidly and the resistance increased as cycle was progressed through EIS, and specially, it was identified that the resistance due to No-Additive and SEI of VEC became very significant. Continuous loss of additives was verified through GC-MS, and the loss of additives from partial decomposition and remodeling of SEI formed the non-uniform surface of SEI and is judged to be the increase of resistance.

• Journal of Biomedical Engineering Research
• /
• v.25 no.4
• /
• pp.261-268
• /
• 2004

Osteoporosis is a clinical condition in which the amount of bone tissue is reduced and the likelihood of fracture is increased. It is known that the electrical property of the bone is related to its density, and, in particular, the electrical resistance of the bone decreases as the bone loss increases. This implies that the electrical property of bone may be an useful parameter to diagnose osteoporosis, provided that it can be readily measured. The study attempted to evaluate the electrical conductivity of bone using a technique of electrical impedance tomography (EIT). It nay not be easy in general to get an EIT for the bone due to the big difference (an order of 2) of electrical properties between the bone and the surrounding soft tissue. In the present study, we took an adaptive mesh regeneration technique originally developed for the detection of two phase boundaries and modified it to be able to reconstruct the electrical conductivity inside the boundary provided that the geometry of the boundary was given. Numerical simulation was carried out for a tibia phantom, circular cylindrical phantom (radius of 40 mm) inside of which there is an ellipsoidal homeogenous tibia bone (short and long radius are 17 mm and 15 mm, respectively) surrounded by the soft tissue. The bone was located in the 15 mm above from the center of the circular cross section of the phantom. The electrical conductivity of the soft tissue was set to be 4 mS/cm and varies from 0.01 to 1 ms/cm for the bone. The simulation considered measurement errors in order to look into its effects. The simulated results showed that, if the measurement error was maintained less than 5 %, the reconstructed electrical conductivity of the bone was within 10 % errors. The accuracy increased with the electrical conductivity of the bone, as expected. This indicates that the present technique provides more accurate information for osteoporotic bones. It should be noted that tile simulation is based on a simple two phase image for the bone and the surrounding soft tissue when its anatomical information is provided. Nevertheless, the study indicates the possibility that the EIT technique may be used as a new means to detect the bone loss leading to osteoporotic fractures.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.567-579
• /
• 2015

The accurate simulation of micro-scale weather phenomena such as fog using the mesoscale meteorological models is a very complex task. Especially, the uncertainty arisen from initial input data of the numerical models has a decisive effect on the accuracy of numerical models. The data assimilation is required to reduce the uncertainty of initial input data. In this study, the limitation of the mesoscale meteorological model was verified by WRF (Weather Research and Forecasting) model for a summer fog event around the Nakdong river in Korea. The sensitivity analyses of simulation accuracy from the numerical model were conducted using two different initial and boundary conditions: KLAPS (Korea Local Analysis and Prediction System) and LDAPS (Local Data Assimilation and Prediction System) data. In addition, the improvement of numerical model performance by FDDA (Four-Dimensional Data Assimilation) using the observational data from AWS (Automatic Weather System) was investigated. The result of sensitivity analysis showed that the accuracy of simulated air temperature, dew point temperature, and relative humidity with LDAPS data was higher than those of KLAPS, but the accuracy of the wind speed of LDAPS was lower than that of KLAPS. Significant difference was found in case of relative humidity where RMSE (Root Mean Square Error) for LDAPS and KLAPS was 15.7 and 35.6%, respectively. The RMSE for air temperature, wind speed, and relative humidity was improved by approximately $0.3^{\circ}C$, $0.2m\;s^{-1}$, and 2.2%, respectively after incorporating the FDDA.

• Journal of Nutrition and Health
• /
• v.42 no.1
• /
• pp.78-96
• /
• 2009

The purpose of this study was to analyze and evaluate the menu served in government offices foodservice by using Kasavana & Smith's Menu-Engineering. Sales and food costs were collected from the daily sales reports for a year from Jan 2 to Dec 31 in 2007. Calculation for menu analysis and customer's data were done by computer using the MS 2003 Excel spreadsheet program and SPSS 12.0 package program. Menu mix% (MM%) and unit contribution margin were used as variables by Kasavana & Smith. Four possible classifications by Menu-Engineering technique were turned out as 'STAR', 'PLOWHORSE', 'PUZZLE', 'DOG'. The main menus served during a year were 128 dishes and about 141 peoples visited this restaurant daily. The mean age of the men was $44.1\;{\pm}\;6.3$, women were $32.7\;{\pm}\;6.4$ and showed that was statistically higher than that of women (p < .0001). The rates of STAR menus were 'Western style (75.0%)', 'guk/tang-ryu (48.1%)', 'jjigae/ jeongol-ryu (23.1%)', 'bap-ryu (17.2%)' in sequence. There were no STAR menus in gui/jorim/jjim-ryu. PLOWHORSE menus were 'gui-ryu (75.0%)', 'guk/tang-ryu (29.6%)', 'bap-ryu (27.6%)' in sequence. There were no PUZZLE or DOG menus in 'jjigae/jeongol-ryu'. PUZZLE menus were 'jorim/jjim-ryu and Myeonryu (each 33.3%)', 'bap-ryu (31.0%)' in sequence. PUZZLE menus were a lots of 'Chinese food (75.0%)' and 'myeonryu (55.6%)'. This study provides the basic data based on regularly menu analysis method applied the scientific menu analysis techniques in government offices food services, I'd like to suggest that the menu management must be done based on the necessity and result of menu analysis according to the seasonal and middle, long-term plans.

• Microbiology and Biotechnology Letters
• /
• v.41 no.1
• /
• pp.135-144
• /
• 2013

The aim of this study was to evaluate various aspects of Vitex negundo L. leaf extract, such as the antioxidative activity, tyrosinase inhibitory effects, and inhibitory activities on ${\alpha}$-MSH induced melanogenesis, and active component analysis. The DPPH (1, 1-diphenyl-2-picrylhydrazyl) scavenging activities ($FSC_{50}$) of the ethyl acetate fraction and aglycone fraction of V. negundo L. leaf extract were $14.51{\mu}g/ml$ and $13.96{\mu}g/ml$, respectively. A luminol-dependent chemiluminescence assay revealed that the reactive oxygen species (ROS) scavenging activity ($OSC_{50}$) of the aglycone fraction of V. negundo L. leaf extract on ROS generated in an $Fe^{3+}$-$EDTA/H_2O_2$ system was the most prominent at $0.22{\mu}g/ml$. The protective effects of the extracts fractions of V. negundo L. leaf against the rose-bengal sensitized photohemolysis of human erythrocytes were increased in a concentration dependent manner ($1{\sim}50{\mu}g/ml$). In particular, there were greater protective effects of the aglycone fraction on the cellular membrane than that of the fat-soluble antioxidant (+)-${\alpha}$-tocopherol. The inhibitory effects ($IC_{50}$) on mushroom tyrosinase were the highest for the ethyl acetate fraction ($IC_{50}$ = $48.58{\mu}g/ml$). The inhibitory effect on ${\alpha}$-MSH induced melanogenesis in B16 melanoma cells was 41.80% at $50{\mu}g/ml$ of ethyl acetate fraction. Active component analyses by TLC, HPLC and LC/ESI-MS revealed luteolin and isoorientin. These results indicate that V. negundo L. leaf extract can be used as an antioxidant for ROS scavenging. Particularly, the luteolin and isoorientin of the ethyl acetate fraction may be applicable to new whitening cosmetics because of its inhibitory effect on mushroom tyrosinase and ${\alpha}$-MSH induced melanogenesis in B16 melanoma cells.

• Korean Journal of Food Science and Technology
• /
• v.33 no.4
• /
• pp.401-408
• /
• 2001

The ethanol extract and n-hexane fraction of Commiphora molmol Engl. showed minimum inhibitory concentration of 50 ppm and 25 ppm, respectively, on 5 strains of Listeria monocytogenes at $32^{\circ}C$. The purified substance, C3-3-2 fraction, was isolated by silica gel column and preparative thin layer chromatography from n-hexane fraction of Commiphora molmol Engl. The C3-3-2 fraction showed a strong bactericidal activity on 5 strains of L. monocytogenes at the concentration of 10 ppm in tryptic soy broth medium. At that concentration, the viable count was reduced $5{\sim}6$ log cycle from initial cell number. The n-hexane fraction of Commiphora molmol Engl. showed strong growth inhibition at the concentration of 25 ppm on Bacillus cereus and Staphylococcus aureus, at 50 ppm in broth on Salmonella enteritidis, and at 500 ppm on Vibrio parahaemolyticus. The purified antimicrobial substance, the C3-3-2 fraction, was identified as m-nonylphenol by on the basis of the $^1H-,\;^{13}C-NMR$ and EI/MS data. For the application test, the C3-3-2 fraction which was purely isolated from Commiphora molmol Engl. at 100 ppm were applied to minced Alaska pollack and ground beef at $32^{\circ}C$ and $5^{\circ}C$. The antimicrobial substances did not reduce L. monocytogenes ATCC 19113 at $32^{\circ}C$, while they reduced L. monocytogenes ATCC 19113 in viable number at $5^{\circ}C$. However, the antimicrobial effect of C3-3-2 fraction in food system was lower than that of broth condition.