• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.6
• /
• pp.433-436
• /
• 2018

A total internal reflection (TIR) linear lens of size $190(W){\times}5(D){\times}2.1(H)mm^3$ has a directivity of $25^{\circ}$ and was made of a polydimethysiloxane (PDMS) silicone resin with a refractive index of 1.4 and a transmittance of 93% at 365 nm UV wavelength. A light source with a size of $190{\times}25.5mm^2$ was fabricated by installing a TIR linear lens on a chip on board (COB) type LED module mounted with a $1.1{\times}1.1mm^2$ size UV LED. The optical characteristics of the light source showed a maximum irradiation density of $3,840mW/cm^2$ at a working distance of 5 mm and a high uniformity of 91.6% over a $150{\times}25mm^2$ irradiation area. The thermal characteristics of the light source were measured at a supply current of 500 mA. The saturation temperature was reached after 30 min of operation, and measured to be $95^{\circ}C$.

• Composites Research
• /
• v.27 no.1
• /
• pp.25-30
• /
• 2014

The actuation performance of an EADE (Electro-active dielectric elastomer) is studied as functions of thinner content, thickness and types of the dielectric elastomer such as natural (NR), acrylonitrile-butadiene (NBR), and silicon (KE-12) rubbers. With a decrease in elastomer thickness ($1{\rightarrow}0.5{\rightarrow}0.25{\rightarrow}0.1{\rightarrow}0.05$ mm) and an increase in thinner content ($0{\rightarrow}30{\rightarrow}50$ phr), the actuating displacement of KE-12 elastomer is increased, however their breakdown occurs at low voltage. For the same thickness (1 mm), the displacement of KE-12 elastomer shows a higher value (2.24 mm) compared to that of NR or NBR at the same applied voltage of 25 kV. The KE-12 has the lowest elastic modulus and the NBR has the highest one among the tested elastomers. However, the displacement of NBR elastomer is higher compared to that of NR because of high dielectric constant. It is found that the important factors of EADE actuator are a thickness, modulus and dielectric constant of the elastomer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2819-2832
• /
• 1996

The estimation of the remaining life for the aged components in power plant as well as chemical and petroleum plants has been recently concerned. The raw materials used in this study are the 1Cr-1Mo-0.25V steel which intensified P and S compositions along with the nominal compositions of ASTM A 470 standard. Five kinds of specimens with the different degradation levels were prepared by isothermal aging heat treatment at 630.deg.C. The mechanical properties and rotated bending fatigue strength of virgin and aged 1Cr-1Mo-0.25V steel have been investigated through the hardness, tensile, fatigue test, SEM fractograph and EDS analysis at 538.deg.C and room temperature, respectively. Thus the data of aged specimens were compared with those of virgin specimen to evaluate the aging effects. The main results obtained in this study are as follows ; The decrease of the yield and tensile strength due to degradation was distinguished until 50, 000hrs simulated service time. And it was confirmed that the considerable amount of P, Mn, Cr and S was precipitated at the grain boundary of aged material through the SEM and EDS analysis. The rotated bendingd fatigue strength at 538.deg.C of virgin, 25, 000, 50, 000, 75, 000 and 100, 000 hrs aged material was decreased 44.6 %, 49.6 %, 51.5 %, 52.4% and 53.8% than that of virgin material at 10$_{7}$cycles of room temperature, respectively. The major cracks of virgin and aged materials mainly initiated at the inclusions including Si, P and Mn compositions which were located at the outer periphery of the specimen.n.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.1
• /
• pp.25-39
• /
• 1986

In this paper, we analyze the performance, particularly the flow control mechanism, of the CCITT X.25 protocol in a packet-switched network. In this analysis, we consider the link and packet layers separately, and investigate the performance in three measures; normalized channel throughput, mean transmission time, and transmission efficiency. Each of these measures is formulated in terms of given protocol parameters such as windos size, $T_1$ and $T_2$ values, message length, and so forth. We model the service procedure of the inpur traffic based on the flow control mechanism of the X.25 protocol, and investigate the mechanism of the sliding window flow control with the piggybacked acknowlodgment scheme using a discrete-time Markov chain model. With this model, we study the effect of variation of the protoccol parameters on the performance of the X.25 protocol. From the numerical results of this analysis one can select the optimal valuse of the protocol parameters for different channel environments. it has been found that to maintain the trasnmission capacity satisfactorily, the window size must be greater than or equal to 7 in a high-speed channel. The time-out value, $T_1$, must carefully be selected in a noisy channel. In a normal condition, it should be in the order of ls. The value of $T_2$ has some effect on the transmission efficiency, but is not critical.

• Journal of Nutrition and Health
• /
• v.45 no.1
• /
• pp.20-29
• /
• 2012

Metabolic syndrome (MetS) has become a global epidemic. In particular, it is known that there is a dramatic increase in the prevalence of MetS among women during the postmenopausal period. Recently, accumulating studies have suggested that vitamin D deficiency may be inversely associated with the risk factors regarding MetS. However, evidence from postmenopausal women is limited. In this study, we examined the association between the serum 25-hydroxyvitamin D [25(OH)D] and the MetS in Korean adult women aged 20-69 years (n = 2,618) by using the 2007-2008 Korean National Health and Nutrition Examination Survey data. The geometric mean of plasma 25(OH)D were $17.16{\pm}6.28\;ng$/mL and $20.20{\pm}7.69\;ng$/mL for premenopausal and postmenopausal women, respectively. The percentages of vitamin D deficiency [25(OH)D < 12 ng/mL] were 22.5% and 14.4%, respectively. MetS was more prevalent in postmenopausal women (43.0%) compared with premenopausal women (11.2%). When serum concentrations of 25(OH)D were categorized in quintiles, there was no relationship in the prevalence of MetS in both premonopausal and postmenopausal women. However, in premenopausal women, compared with the lowest 25(OH)D quintile, the odds ratio for hypertriglyceridemia in the highest quintile was 0.57 (95% CI 0.34-0.95, $P_{trend}$ = 0.041) and for low serum HDL cholesterol 0.60 (95% CI 0.42-0.85, $P_{trend}$ = 0.014) after adjusting for all potential confounders. On the other hand, we observed the tendency of an inverse relationship for 25(OH)D regarding low serum HDL cholesterol (OR 0.78, 95% CI 0.50-1.22, $P_{trend}$ = 0.029) and a direct relationship with abdominal obesity (OR 1.94, 95% CI 1.01, 3.74, $P_{trend}$ = 0.049) in postmenopausal women. Further studies are needed to confirm these findings in other research settings.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.6
• /
• pp.413-419
• /
• 2011

Nanoscale zero-valent iron (NZVI) particles were tested as remediation media for groundwater contaminated by organic pollutants (e.g., TCE, trichloroethylene). The contaminated groundwater contained anions ($NO_3^-$, $Cl^-$, $SO_4^{2-}$, and $HCO_3^-$) and natural organic matter (NOM). Treatability of commercial NZVI particles (NANOFER 25, Nanoiron, Czech) was tested by using a synthetic groundwater and the field groundwater samples. More than 95% of 1.8 mM TCE was removed within 20 hours with a NZVI dosage of 25 g/L ($k=0.15hr^{-1}$). Repetitive degradation experiments revealed that the removal capacity of NANOFER 25 was 0.19 mmole TCE/g NZVI. TCE degradation reactions were not substantially affected by the presence of each anion with concentrations as high as 100 times the average field concentrations. However, when the four anions ($NO_3^-$, $Cl^-$, $SO_4^{2-}$, $HCO_3^-$) were present simultaneously. the degradation reactivity and removal capacity were decreased by 60% ($k=0.069hr^{-1}$) and 10%, respectively. The k value of TCE degradation in the presence of NZVI (25 g/L) with dissovled organic carbon of 2.5 mg/L was also decreased by 84% ($k=0.025hr^{-1}$). In the experiments with the field groundwater, more than 90% of $1.8{\mu}M$ TCE, which is the concentration of TCE at the source zone, was removed within 10 hours with a NANOFER 25 dosage of 25 g/L. The results imply that the contaminated groundwater can effectively be treated by NANOFER 25 with more information on the hydrogeology of the site.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.132-137
• /
• 2001

Miniaturized specimen technology is useful to characterize the mechanical behavior using a minimum volume of material, because it is almost impossible to sample the conventional specimen for the fracture toughness test without damage to equipment. Test material was 1Cr-1Mo-0.25V steel which was widely used for turbine rotor material. Two kinds of miniaturized impact specimens were prepared, i.e., miniaturized specimen with side groove and without side groove. The correlation between ductile brittle transition temperature(DBTT) of full size impact specimen and that of miniaturized impact specimen was made. The characteristics of miniaturized impact specimens technique as well as fracture stress were discussed. Finally, we concluded that the characteristics of fracture stress change on aging time were similar to that of DBTT.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.1
• /
• pp.53-60
• /
• 2022

Recently, Black soybean (Glycine max L. Merr.) is being cultivated in paddy fields instead of rice. However, research related to the effective sowing date is insufficient in paddy fields. This study aimed to identify the sowing date for stable cultivation of black soybean by investigating its yield and seed characteristics in a paddy field. In the study, cultivation experiment with five different sowing dates (May 25, June 10, June 25, July 10, July 25) were conducted in 2019 and 2020. Days from sowing to flowering can be shortened by delaying the sowing date. In the present study, the yield of black soybean in paddy fields was the highest with June 10 as the sowing date and was calculated as 224 kg·10a^-1 and 200 kg·10a^-1 in 2019 and 2020, respectively. However, the highest values of seed coat cracking was 51.1±5.1% and that of total anthocyanin contents was the 3.99±0.72 mg/g, both of which were observed in 2020 for the experiment with May 25 as the sowing date. Regression analysis showed a positive correlation (R²=0.9312) between soil water contents and seed coat cracking rate during the flowering period. Hence, the soil water contents during the flowering period would have a negative effect on the seed coat development.

• Korean Journal of Animal Reproduction
• /
• v.24 no.1
• /
• pp.69-76
• /
• 2000

This study was carried out to improve of effective culture system on development of IVM/IVF/IVC bovine embryos. The cumulus-oocyte-complexes (COCs) collected from Korean cattle ovaries harvested at a local abattoir were matured in 50 ${mu}ell$ of TCM199 supplemented with 10% fetal bovine serum (FBS) and hormones (35 $\mu\textrm{g}$/$m\ell$ FSH, 10 $\mu\textrm{g}$/$m\ell$ LH, 1$\mu\textrm{g}$/$m\ell$ estradiol 17 $\beta$ under paraffin oil at 39$^{\circ}C$ in a humidified atmosphere of 5% $CO_2$in air. At 24 hrs after culture, matured oocytes were fertilized in vitro for 22~24 hrs with motile semen in which obtained by centrifugation of a frozen thawed semen on Percoll-density gradients (45% vs. 90%) at 500 g for 20 min. The presumptive zygotes were divided into three experimental groups. Single egg (Group 1), 25 (Group 2) or 50 eggs (Group 3) were cultured on cumulus cell in 50 ${mu}ell$ TCM199 supplement with 10% FBS for 6~9 days after fertilization. In vitro developmental rates into the blastocysts in the groups 2 and 3 were significantly (P＜0.05) higher than those of group 1 (37,27 vs. 6%, respectively). Cell number of blastocysts obtained in groups 2 and 3 at day 8 were significantly (P${mu}ell$) resulted in higher developmental competence and cell number of bovine blastocysts produced in vitro than those the culture of single embryos with cumulus cells.

• Journal of Technologic Dentistry
• /
• v.8 no.1
• /
• pp.91-99
• /
• 1986

In order to evaluate the community dental health level the actual health capacity of the lower-first permanent molar is suitable as a indicator for assessment. So we had surveyed decayed, missed and filled lower permanent first molar of 460 persons who were in the age from 20 to 29 in Iri City. The obtained results were as follows: 1. The DMFT indices of the lower first permancent molars showed in 1.40 in the age group of from 20 to 24 and 1.44 from 25 to 29. 2. The actual dental health capscities of the lower first permanent molars showed in 84.86% in the age group of from 20 to 24 and 81.03% from 25 to 29. 3. The DMF indices of the lower first permanent molars showed 15.15% in the age group of from 20 to 24 and 18.98% of from 25 to 29. 4. The DMF rates of the lower first permanent molars showed 85.66% in the age group of from 20 to 24 and 88.70% of from 25 to 29. 5. The DMF rates of the lower first permanent molars showed 70.00% in the age group of from 20 to 24 and 71.96% of from 25 to 29. 6. The DT rates of the lower first permanent molars showed 48.84% in the age group of from 20 to 24 and 39.55% of from 25 to 29. 7. The FT rates the lower first permanent molars showed 40.22% in the age group of from 20 to 24 and 43.98% of from 25 to 29. 8. The MT rates of the lower first permanent molars showed 10.94% in the age group of from 20 to 24 and 16.17% of from 25 to 29.