• 제목/요약/키워드: 18GHz band

검색결과 340건 처리시간 0.029초

무선 LAN 시스템 성능개선에 관한 연구 (A Research on Performance Improvement of Wireless LAN System)

  • 조주필
    • 한국정보통신학회논문지
    • /
    • 제18권5호
    • /
    • pp.1028-1033
    • /
    • 2014
  • 본 논문은 4세대 무선 통신방식의 하나인 OFDM 기반의 60 GHz 무선 랜에서의 위상잡음의 영향에 관하여 논한다. 60 GHz 주파수 대역은 광대역 전송이 가능할 뿐만 아니라 실내 무선 환경에서의 무선 링크를 밀집 시킬 수 있다는 장점이 있다. 본 논문에서는 시스템 구현이 용이한 위상잡음 억제 알고리듬을 OFDM 기반의 60 GHz 무선 랜 시스템에 적용하고 이에 따른 성능을 SER 측면에서 분석하였다. 60 GHz 대역에서 발생하는 위상잡음 환경에서 위상잡음 억제 알고리듬을 적용한 경우, 그렇지 않은 경우에 비해 16-QAM, 64-QAM에서 각각 6 dB, 7.5 dB 정도의 SER 성능 향상을 보였다.

WLAN 시스템용 이중 대역 CPW 소형 슬롯 안테나 (Dual-band Compact CPW-fed Slot Antenna for WLAN applications)

  • 최인태;신호섭
    • 한국정보통신학회논문지
    • /
    • 제20권1호
    • /
    • pp.1-7
    • /
    • 2016
  • 본 논문에서는 WLAN 시스템을 위한 CPW 소형 슬롯 안테나를 제안하였다. 길이가 다른 두 개의 스터브와 접혀진 슬롯을 이용하여 $20{\times}18{\times}1mm^3$의 소형의 크기로 2.4 GHz 대역과 5 GHz 대역에서 사용할 수 있는 안테나를 모의 실험을 통해 최적화하여 설계 및 제작 하였다. 제작은 1.0 mm 두께의 FR-4 기판으로 하였으며 이중 대역에서 반사 손실 -10 dB 이하의 측정 결과를 얻어 이중 대역 WLAN 시스템용 안테나로서 사용할 수 있음을 보였고, RFID 시스템에서도 사용이 가능할 것으로 기대된다.

광대역 고속 AFC 기법을 적용한 다중 대역 VCO의 설계 (Design of Multi-Band VCO with Fast AFC Technique)

  • 안태원;윤찬근;이원석;문용
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.983-984
    • /
    • 2006
  • Multi-band VCO with fast response adaptive frequency calibration (AFC) technique is designed in 1.8V $0.18{\mu}m$ CMOS process. The possible operation is verified for 5.8GHz band, 5.2GHz band, and 2.4GHz band using the switchable L-C resonators for 802.11a/b/g WLAN applications. To linearize its frequency-voltage gain, optimized multiple MOS varactor biasing technique is used. In order to operate in each band frequency range with reduced VCO gain, 4-bit digitally controlled switched-capacitor bank is used and a wide-range digital logic quadricorrelator is implemented for fast frequency detector.

  • PDF

A Triple-Band Voltage-Controlled Oscillator Using Two Shunt Right-Handed 4th-Order Resonators

  • Lai, Wen-Cheng;Jang, Sheng-Lyang;Liu, Yi-You;Juang, Miin-Horng
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권4호
    • /
    • pp.506-510
    • /
    • 2016
  • A triple-band (TB) oscillator was implemented in the TSMC $0.18{\mu}m$ 1P6M CMOS process, and it uses a cross-coupled nMOS pair and two shunt $4^{th}$ order LC resonators to form a $6^{th}$ order resonator with three resonant frequencies. The oscillator uses the varactors for band switching and frequency tuning. The core current and power consumption of the high (middle, low)- band core oscillator are 3.59(3.42, 3.4) mA and 2.4(2.29, 2.28) mW, respectively at the dc drain-source bias of 0.67V. The oscillator can generate differential signals in the frequency range of 8.04-8.68 GHz, 5.82-6.15 GHz, and 3.68-4.08 GHz. The die area of the triple-band oscillator is $0.835{\times}1.103mm^2$.

CMOS 0.18um 공정을 이용한 3.1-10.6 GHz UWB LNA 설계 (3-10.6GHz UWB LNA Design in CMOS 0.18um Process)

  • 정하용;황인용;박찬형
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2008년도 하계종합학술대회
    • /
    • pp.539-540
    • /
    • 2008
  • This paper presents an ultra-wideband (UWB) CMOS low noise amplifier (LNA) topology that operates in 3.1-10.6GHz band. The common gate structure provides wideband input matching and flattens the passband gain. The proposed UWB amplifier is implemented in 0.18 um CMOS technology for lower band operation mode. Simulation shows a minimum NF of 2.35 dB, a power gain of $18.3{\sim}20\;dB$, better than -10 dB of input and output matching, while consuming 16.4 mW.

  • PDF

A Compact Microstrip Patch Antenna Based on Metamaterials for Wi-Fi and WiMAX Applications

  • Nelaturi, Suman;Sarma, Nookala Venkata Satya Narasimha
    • Journal of electromagnetic engineering and science
    • /
    • 제18권3호
    • /
    • pp.182-187
    • /
    • 2018
  • A low profile asymmetrical fractal boundary patch antenna based on reactive impedance surface (RIS) and a mushroom unit cell (MUC) is proposed and studied for dual band operation. The sides of the square patch antenna are replaced with asymmetrical half circled fractal curves for circular polarization operation at patch mode band. The fractal patch antenna is loaded with MUC for dual band operation. The antenna radiation characteristics are investigated and illustrated with both simulated and experimental results in detail. The 10-dB return loss bandwidth are 8.48% (3.21-3.49 GHz) and 2.59% (2.30-2.36 GHz) at upper and lower resonance frequencies, respectively. The 3-dB axial ratio bandwidth is 4.26% (3.21-3.35 GHz). A close agreement between simulation data with experimental results is observed.

스위칭 트랜지스터를 이용하여 2.4/3.5/5.2 GHz에서 동작하는 다중 대역 저잡음 증폭기 설계 (Design of Multi-Band Low Noise Amplifier Using Switching Transistors for 2.4/3.5/5.2 GHz Band)

  • 안영빈;정지채
    • 한국전자파학회논문지
    • /
    • 제22권2호
    • /
    • pp.214-219
    • /
    • 2011
  • 본 논문에서는 2.4, 3.5, 5.2 GHz의 대역에 맞추어 스위칭 동작을 하는 다중 대역 저잡음 증폭기를 CMOS 0.18 um 공정을 이용하여 설계하였다. 제안된 회로는 스위칭 트랜지스터를 이용하여 입력단에서는 트랜스 컨덕턴스, 게이트-소스 캐패시턴스를 조정하고, 출력단에서는 캐패시턴스를 조정하는 방식으로 다중 대역 입출력 정합을 이루었다. 제안된 저잡음 증폭기는 각 스위칭 트랜지스터의 동작 상태에 따라 2.4, 3.5, 5.2 GHz 대역에서 제안된 회로는 입출력단에서 각각 14.2, 12, 11 dB의 이득과 3, 2.9, 2.8의 잡음 지수 특성을 갖는다. 다중 대역 저잡음 증폭기는 1.8 V의 공급 전압에 대해서 4.2~5.4 mW의 전력을 소비한다.

단거리전용통신을 위한 5.8GHz대역 LNA MMIC 설계 및 구현 (The Design and implementation of a 5.8GHz band LNA MMIC for Dedicated Short Range Communication)

  • 문태정;황성범;김용규;송정근;홍창희
    • 대한전자공학회논문지SD
    • /
    • 제40권8호
    • /
    • pp.549-554
    • /
    • 2003
  • 본 논문에서 단거리전용통신을 위한 차량탑재장치내의 수신단 전반부의 구성부품인 5.8GHz대역 LNA를 MMIC로 설계 및 구현하였다. 설계된 LNA는 두개의 능동소자와 매칭회로, 두개의 드레인 바이어스 회로로 구성되며, 3V의 단일공급전압에서 18mA의 소비전류로 동작한다. 중심주파수 5.8GHz에서 이득 13.4dB, NF 1.94dB, Input IP3-3dBm, S/sub 11/ - l8dB, S/sub 22/ - 13.3dB의 특성을 나타내며, 제작된 회로의 실제 크기는 1.2×0.7㎟ 이다.

동일 군속도 지연 상쇄기를 이용한 이중 대역 Feedforward 선형 전력 증폭기 (Dual-Band Feedforward Linear Power Amplifier Using Equal Group Delay Signal Canceller)

  • 최흥재;정용채;김홍기;김철동
    • 한국전자파학회논문지
    • /
    • 제18권7호
    • /
    • pp.839-846
    • /
    • 2007
  • 본 논문에서는 새로운 구조의 이중 대역 feedforward 선형 전력 증폭기(FFW LPA)의 설계 방법을 제안하였다. 현재까지 이중 대역 FFW LPA 설계의 기술적인 어려움은 단일 대역 FFW LPA에서 사용되는 신호 상쇄기를 이중 대역 동작으로 확장시키기가 쉽지 않았다는 점이다. 따라서 본 논문에서는 이중 대역 동일 군속도 지연 주 신호 상쇄기와 혼변조 왜곡 신호(Intermodulation Distortion: IMD) 상쇄기의 설계 방법, 그리고 이를 이용하여 단일 대역 FFW 기법을 확장한 이중 대역 FFW LPA의 설계 방법을 제안하였다. 제안하는 설계 방식의 효용성을 검증하기 위하여, 동작 대역의 중심 주파수를 기준으로 1.26 GHz 이격된 디지털 셀룰러 대역($f_0=880$ MHz)과 IMT-2000($f_0=2.14$ GHz) 대역 기지국용 이중 대역 feedforward 선형화 시스템을 구현하였다. 각 대역별로 CDMA IS-95A 4FA 신호와 WCDMA 4FA 신호를 인가하여 인접 채널 누설비(Adjacent Channel Leakage Ratio: ACLR)의 개선 정도를 측정한 결과, 디지털 셀룰러 대역에서 평균 출력 전력 41.5 dBm일 때 16.52 dB, IMT-2000 대역에서 평균 출력 전력 40 dBm일 때 18.59 dB의 개선 효과를 동시에 얻을 수 있었다.

Design of a Multiple Band-notched Wideband Circular Slot Antenna with Arc-shaped Slots

  • Yeo, Junho;Park, Cheol-Young
    • 한국산업정보학회논문지
    • /
    • 제18권1호
    • /
    • pp.11-17
    • /
    • 2013
  • A design method to achieve multiple band-rejection characteristics in a wideband circular slot antenna is presented. First, a wideband circular slot antenna fed by a coplanar waveguide is designed to operate in the frequency range between 2.3 and 11GHz, which covers WLAN, WiBro, WiMAX, and UWB frequency bands. Next, resonant frequency variations of rejection bands are examined with respect to different slot locations and lengths when slots are inserted on the ground conductor and the circular patch of the antenna. When arc-shaped slots are placed close to the circular transition from a feeding part, multiple notch bands are obtained. In this case, a half of the guided wavelength of the first notch band corresponds to the slot length and other notch bands are integer-multiple of the first band. Single notch band can be obtained when the slot is located off the transition part. Based on this study, a wideband circular slot antenna with five band-rejection frequency bands at 2.45, 3.5, 4.9, 7.35, and 9.8GHz is designed and fabricated. The first arc-shaped slots are located in the ground conductor close to the circular transition from a feeding part to generate notch bands at 2.45, 4.9, 7.35, and 9.8GHz, while the second slot for 3.73 GHz is placed on top side in the circular patch. The proposed design method is validated by good agreement between the simulated and measured results.