• 한국환경생태학회지
• /
• 제12권3호
• /
• pp.242-252
• /
• 1998

The inhabitation environments and growth conditions of Machilus thunbergii community in the Pyonsanbando located at southwestern area in Korea were examined and analyzed to provide some practical data to be used to establish measures for long term succession monitoring, protection and sustainable management. The Machilus thunbergii community are located at Kyokpo-ri, Pyonsan-myon, Puan-gun(35$^{\circ}$35′24"N~35$^{\circ}$ 42′30"N, 126$^{\circ}$28′18"E~126$^{\circ}$40′40"E). Within the Pyonsanbando area the mean temperature is 12.4$^{\circ}C$, the warmth index 101.5$^{\circ}C$.month, the coldness index -12.3$^{\circ}C$ month and the annual precipitation 1,016mm. The soil within the community is silt loam or clay loam and so fertile. 30 species and 1 varieties of 21 families inhabited at the community. There were 18 grown trees and 131 saplings of Machilus thunbergii within the community. The mean basal diameter, mean height, and crown width of grown trees was measured to be 57.4cm, 7.4m and 9.0~9.8m respectively. And 9 trees were full flowering, 2 trees small flowering here and there, and 7 trees non flowering in 1998. The mean branch growth length was 8.3cm, mean leaf area 18.3$\textrm{cm}^2$, mean inflorecence length 9.3cm, mean fertilization 14.5％ and mean seed diameter 7.6mm. Further rich management measure and investigation were recommended such as sapling protection, signboard construction, soil erosion controlling and regular monitoring within the community.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.145-151
• /
• 2010

The performance of a direct-injection diesel engine often depends on the strength of swirl or squish, the shape of combustion chamber, the number of nozzle holes, etc. This is natural because the combustion in the cylinder was affected by the mixture formation process. Since the available duration to make the mixture formation of air-fuel is very short, it is difficult to make complete mixture. Therefore, an early stage of combustion is violent, which leads to the weakness of noise and vibration. In this paper, the combustion process of a common-rail diesel engine was studied by employing two kinds of pistons. One has several grooves with inclined plane on the piston crown to generate swirl during the compression and expansion strokes in the cylinder in order to improve the atomization of fuel. The other is a toroidal piston, generally used in high speed diesel engines. To take photographs of flame and flaming duration, a four-stroke diesel engine was remodeled into a two-stroke visible single cylinder engine and a high speed video camera was used.

• 한국음향학회지
• /
• 제19권6호
• /
• pp.3-9
• /
• 2000

The Bell King Songdok the Great tolls magnificient sound that would be a great vehicle which brings all beings to the Sutras. Since 693, there was a magic flute, MANPASIKJUK, which was in existence in Shilla Dynasty that could lull all the evil-wawes, such an plaques, storms, Droughts, Famines and even Enemies. Thus, a sound tube, MANPASIKJUK, was erected in the crown of the Bell Songdok the Great so as to be effective to emit the nominal frequency tone whenever the Bell tolls for the national prosperity and welfare the People. Therefore, the Bell makers tried to fine the transmissibility condition through the sound tubr, several times during 34 years, However, it seems to be unfinished. Ever since, all of the korean Brahman Bell have the sound tubes of MANPASIKJUK, but none is performed their own functions. Here, one of the way to let the function of the sound tube of MANPASIKJUK out in the Bell Songdok the Great is proposed. There are two steps: the 1st is to elongate 18cm to the present length 77cm to fulfill the transmissibility condition for the nominal frequency of sound is emitted through the corrected sound tybe. 2nd step is to rise to 95% of the emission of the tone of nominal frequency, so that an exponential hem with the flare constant 2.8m-1, length 2.259m and the radius of the mouth 1.772m is to be extended to the corrected sound tube.

• Journal of Oral Medicine and Pain
• /
• 제17권2호
• /
• pp.119-128
• /
• 1992

In order to evaluate the relationship of age with the developmental stage on mandibular second molars in female, the author examined the radiographs in standard films taken by intraoral paralleling technic and analysed the development of 620 roots of 310 females ranged from 10 to 18 years. The development was divided into 7 stages : Crown complete (Cr.C.), Root lengthed 1/4(R.1/4), Root length 1/2 (R.1/2), Rooth length 3/4 (R.3/4), Rooth length complete (R.C), Apex 1.2 closed (A. 1/2), Apical closure complete (A.C) The obtained results were as follows : 1. The formation of roots in fulllength of mandibular second molars was completed at 14.21-year-age in mesial root and at 14.96-year-age in distal root. 2. The formation of apical foramen of mandibular second molars was completed at 17.11-year-age in mesial root and at 17.53-year-age in distal root. 3. The mesial root of mandibular second molar was generally developed earlier than distal root (p<0.01) 4. Coefficients of correlation and regression equations between for age(Y) and the developmental stage of mandibular second molar(X) were "Y=1.53X+6.54, r=0.91 (p<0.01)" in mesial root and "Y=1.52X+7.11, r=0.92(p<0.01)" in distal root respectively.l root respectively.

• 한국조경학회지
• /
• 제18권3호통권39호
• /
• pp.1-9
• /
• 1990

Landscape plants as attenuator of vehicular noise were basically experimented with 8 kinds of trees and shrubs at the university nursery, and checked the attenuating effects by the planted distances, species and sound frequencies. The experimental results are shown and sumarized as follows ; 1. Most plants showed the considerable noise attenuating function in the sound frequencies of 63Hz and 1,000Hz. Tall trees such as Juniperus chinensis var. kaizuka and Magnolia grandiflora showed better effects than shrubs or small trees such as Gardenia jasminoides, Osmanthus fragnance, Osmanthrs heterophyllus, Rhododendron indicum, Chamaecyparis obtusa 'Tetragona Aurea' and Pinus paruiflora in 63Hz frequency, but shrubs showed better effects in 1,000Hz. 2. Trees showed 6~8dB attenuation and shrubs 4~5dB regardless an increase of distance between sound source and receiver in 63Hz. 10 meter width of tree belt could reduce 10 more dB, but 5 meter of shrub belt showed the same effect in 1,000Hz. 3. Trees having more leaves and wider crown showed constantly increase of attenuation of sound by the distance in 1,000Hz, and distinct increase of attenuation were observed in 2,000 more Hz.

• 대한치과보철학회지
• /
• 제38권5호
• /
• pp.583-594
• /
• 2000

Dislodgement of a crown or extension bridge and the loosening of a retainer of a bridge is a serious clinical problem in fixed restoration. Generally these problems are considered to be associated with deformation of the restoration. During biting, the restoration is subjected to complex forces and deforms considerably within the limit of its elasticity. Deformation of the restoration under the occlusal force induces excessive stress in the cement film, which then leads to the cement fracture. Such a fracture may eventually cause loss of the restoration. Because most of the past retention tests for full veneer crown were done without fatigue loading, they were not exactly simulating intraoral environment. And the purpose of this study was to evaluate the effect of cyclic cantilever loading on the retentive strength of full veneer crowns depending on different type of cements and taper of prepared abutment. Steel dies with $8^{\circ}\;or\;16^{\circ}$ convergence angle were fabricated through milling and crowns with the same method. These dies and crowns were divided into 8 groups. Group 1 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 2 : $16^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 3 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, without loading Group 4 : $8^{\circ}$ taper die, cementation with zinc phosphate cement, with loading Group 5 : $16^{\circ}$ taper die, cementation with Panavia 21, without loading Group 6 : $16^{\circ}$ taper die, cementation with Panavia 21, with loading Group 7 : $8^{\circ}$ taper die, cementation with Panavia 21 without loading Group 8 : $8^{\circ}$ taper die, cementation with Panavia 21, with loading After checking the fit of die and crown, the luting surface of dies and inner surface of crowns were air-abraded for 10 seconds. The crowns were cemented to the dies, with cements mixed according to the manufacturer's recommendations. A static load of 5kg was then applied for 10 minutes with static loading device. Twenty-four hours later, group 1, 3, 5, 7 were only thermocycled, group 2, 4, 6, 8 were subjected to cyclic loading after thermocycling. Retentive tests were performed on the Instron machine. From the finding of this study, the following conclusions were obtained 1. Panavia 21 showed significantly higher retentive strength than zinc phosphate cement for all groups (p<0.05). 2. There was a significant difference in the retentive strength between $8^{\circ}\;and\;16^{\circ}$ taper for zinc phosphate cement(p<0.05), but no significant difference for Panavia 21 (p>0.05). 3. Cyclic loading significantly decreased the retentive strength for all groups(p<0.05). 4. For zinc phosphate cement, there was 35% reduction of the retentive strength after loading in the $16^{\circ}$ taper die, 25% in the $8^{\circ}$ taper die, and for Panavia 21, 21% in the $16^{\circ}$ taper die, 18% in the $8^{\circ}$ taper die.

• 한국산림과학회지
• /
• 제40권1호
• /
• pp.1-18
• /
• 1978

소나무 천연집단(天然集團)의 변이(變異)를 조사(調査)하기 위(爲)해 1974년(年), 1975년(年), 1976년(年)에 각각(各各) 3개집단(個集團)을 조사(調査)한데 이어 1977년(年)에 강원도(江原道) 명주군(溟洲郡) 왕산면(旺山面) 대기리(大基里)(집단(集團) 10)와 경북(慶北) 봉화군(奉化郡) 춘양면(春陽面) 서벽리(西碧里)(집단(集團) 11)와 경기도(京畿道) 양주군(楊州郡) 봉접면(棒接面) 장현리(長峴里)(집단(集團 12)에서 각각(各各) 1개집단(個集團) (한 집단(集團)에서 20주(株))씩의 임분(林分)을 택(擇)하여 각임목개체(各林木個體)를 조사(調査)하였다. 대상임목(對象林木)은 외부형태학적(外部形態學的) 특성(特性), 침엽(針葉)의 특성(特性), 재질(材質)의 특성(特性)이 조사분석(調査分析)되었고 그 결과(結果)는 다음과 같이 요약(要約)된다. 1. 3개집단(個集團)의 평균임령(平均林齡)은 40~45년간(年間)에 있고, 왕산(旺山), 봉화집단(奉化集團)의 성장(成長)은 비슷하나 양주집단(楊州集團)은 부진(不振)한 편이였다. 지하고율(枝下高率)은 봉화집단(奉化集團)이 0.53로 가장 높은 값이었고, 수관지수(樹冠指數)는 양주집단(楊州集團)이 1.65로 불량(不良)하다고 생각되었다. 세지성(細枝性)은 왕산집단(旺山集團)이 좋았고, 봉화집단(奉化集團)의 분지각(分枝角)이 가장 좁았고 수관장(樹冠長)은 양주(楊州)다. 기공열수(氣孔列數)와 집단(集團)이 가장 작았다. 2. 지하고대(枝下高對) 수고율(樹高率) 그리고 수관지수(樹冠指數)의 빈도분포(頻度分布)를 보면 집단간(集團間)에 차이(差異)가 있는 것으로 사료(思料)된다. 3. 0.5cm장(長)당의 거치밀도(鋸齒密度)는 3개집단(個集團) 모두 약 28로서 집단간(集團間), 집단내(集團內), 개체간(個體間) 모두 유의차(有意差)는 없었고, 수지도수(樹脂道數)에 있어서는 집단간(集團間), 집단내(集團內), 개체간(個體間) 모두 유의차(有意差)가 나타났다. 4. 수지도지수(樹脂道指數)(R.D.I.)에 있어서는 양주집단(楊州集團)이 0.119로서 다른 두 집단(集團)보다 큰 값을 나타냈다. 5. 10년단위(年單位) 평균(平均) 연륜폭(年輪輻)에 있어서 집단간(集團間)에는 유의차(有意差)가 없었고, 집단내(集團內) 개체간(個體間)의 연륜구분간(年輪區分間)에는 유의차(有意差)가 있었다. 6. 평균추재율(平均秋材率)에 있어서는 집단간(集團間) 차이(差異)가 없었으나, range에 있어서 차이(差異)가 있었다. 7. 목재비중(木材比重)은 평균치(平均値)에 있어서 집단간(集團間) 차이(差異)가 없었으나, range에 있어서는 차이(差異)가 수령(樹齡)의 증가(增加)에 따라 왕산(旺山), 봉화집단(奉化集團)은 증가(增加)하나, 양주집단(楊州集團)은 감소(減少)하였다. 8. 가도관장(假導菅長)에는 집단간차이(集團間差異)가 없고 range 또한 비슷하고 수령(樹齡)의 증가(增加)에 따라 그 길이가 증가(增加)하고 있었다. 증가경향(增加傾向)에는 집단간차이(集團間差異)가 없었다.

• 한국수정란이식학회지
• /
• 제30권1호
• /
• pp.51-57
• /
• 2015

This study was aimed to determine the biometry of genital organs, incidence of gynecological disorders and pregnancy loss in Black Bengal goat (Capra hircus). Genitalia of 118 does were collected from local abattoirs. Biometric parameters of genital organs were measured and gross and histopathological examinations were carried out for detection of abnormalities. For gravid uterus, age of the fetus was determined by measuring crown-rump length. There was no significant difference in the length, width and weight of right and left ovaries (P>0.05). However, the number of follicles between left ($5.3{\pm}2.3$) and right ovaries ($7.4{\pm}2.7$) varied significantly (P<0.05). The mean length of right fallopian tube and uterine horn were not varied with those of left fallopian tube and uterine horn. The length of uterine body, cervix and vagina were $1.3{\pm}0.1cm$, $3.3{\pm}0.5cm$ and $6.8{\pm}1.3cm$, respectively. Overall, 29 (24.6%) genitalia had abnormalities. Fifteen genitalia (12.7%) had ovarian abnormalities including ovaro-bursal adhesions (6.8%), parovarian cyst (5.1%) and follicular cyst (0.9%). Uterine abnormalities were found in 12 genitalia (10.2%) and predominant uterine lesion was endometritis (6.8%) followed by adenomyosis (1.7%), hemorrhagic lesion on endometrial surface (0.9%) and cyst in broad ligament (0.9%). In addition, cyst in fallopian tube (0.9%) and vagina (0.9%) were recorded. The proportion of slaughtered pregnant goats was 15.3% (18/118). The pregnancy wastage was highest in the first month (50.0%) followed by second (33.3%) and third (16.7%) month. It can be concluded that ovaro-bursal adhesions, parovarian cyst and endometritis are the gynecological disorders of major concern in Black Bengal goat.

• Restorative Dentistry and Endodontics
• /
• 제27권4호
• /
• pp.432-440
• /
• 2002

The purpose of this study is to identificate root canal system including ideal access placement, root curvature, canal configuration, incidence of isthmus in mandibular incisors for success of endodontic treatment. 200 mandibular incisors were selected. The ideal access placement was determimed as follows. The teeth there radiographed from mesiodistal and buccolingual views using intraoral dental film. The image was divided into coronal, middle and apical third using the proximal film. Straight line access was determined by measuring the faciolingual canal width and placing points at midway point between the buccal and lingual wall at the junction of the middle and apical third and at the juntion of coronal and middle third of the root canal. A line was drawn connecting these two points extending through the crown of the tooth. The point at which the line crossed the external crown surface was recorded as facial, incisal, lingual. Degree of root curvature was determined by Schneider Protractor Method. Both section method and clearing method were used in this study. By section method, 100 mandibular incisors were embedded in clear resin and transeverse serial sectioned at 0.5, 1.0, 2.0, 3.0, 4.0, 5.0mm level from root apex. The resected surfaces were stained by methylene blue and examined under $\times$40 magnification with a stereomicroscope. By clearing method, 100 mandibular incisors were cleared in methysalicylate after decalcification with 10% nitric acid and evaluated under $\times$18 magnification with a stereomicroscope. The results were as follows ; 1. 29% had the center of the plotted straight-line access facial to incisal edge, whereas 71% had straight-line access at the incisal edge. When incisal wear classified as extensive, the straight-line access was plotted on the incisal edge 95.5%. When incisal wear classified as slight/none, the straight-line access was plotted on the facial 65.9%. 2. Degree of curvature of main canal was straight or almost straight, and only 10% in buccolingual direction had a degree of curvature greater than 20 degrees and 5.5% in mesiodistal direction had. 3. In section method, canal configuration analysis showed that 51% of the specimen classified as type I, 27% as type II, 12% as type III, 10% as type IV. For theses setions with two canals, the incidence of an isthmus was 36.7%, 64.3%, 79.2%, 96.3%, 97.4%, 97.6% at each level and highest in 3~5mm sections. 4. In clearing method, canal configuration analysis showed that 74% of the specimen classified as type I, 11% as type II, 6% as type III, 9% as type IV. These results suggested that traditional access from lingual should be moved as far toward the incisal as possible to locate and debride the lingual canal and root canal system should be cleaned, shaped completely and obturated three dimensionally for successful endodontic treatment.

• 대한치과보철학회지
• /
• 제40권2호
• /
• pp.131-139
• /
• 2002

There have been many studies about marginal discrepancy of single restorations made by various systems and materials. But many of statistical inferences are not definite because of sample size, measurement number, measuring instruments. etc. The purpose of this study was to compare the marginal adaptations of the anterior single restorations made by different systems and to consider more desirable statistical methods in analysing the marginal fit. The in vitro marginal discrepancies of three different all-ceramic crown systems (Celay In-Ceram. Conventional In-Ceram. IPS Empress 2 layering technique) and one control group (PFM) were evaluated and compared. The crowns were made from one extracted maxillary central incisor prepared with a 1mm shoulder margin and $6^{\circ}$ taper walls by milling machine. 10 crowns per each system were fabricated. Measurements or a crown were recorded at 50 points that were randomly selected for marginal gap evaluation. Non-parametric statistical analysis was performed for the results. Within the limits of this study, the following conclusions were drawn: 1 Mean gap dimensions and standard deviations at the marginal opening for the maxillary incisor crowns were $98.2{\pm}40.6{\mu}m$ for PFM, $83.5{\pm}18.7{\mu}m$ for Celay In-Ceram, $104.9{\pm}44.1{\mu}m$ for conventional In-Ceram, and $45.5{\pm}11.5{\mu}m$ for IPS Empress 2 layering technique. The IPS Empress 2 system showed the smallest marginal gap (P<0.05). The marginal openings of the other three groups were not significantly different (P<0.05). 2 The marginal discrepancies found in this study were all within clinically acceptable standards ($100\sim150{\mu}m$). 3. When the variable is so controlled that the system may be the only one, mean value is interpreted to be the marginal discrepancy of a restoration which is made by each system and standard deviation is to be technique-sensitivity of each one. 4. From the standard deviations. the copy-milling technique (Celay/In-Ceram) was not considered to be technique-sensitive in comparison with other methods. 5. Parametric analysis is more reliable than non-parametric one in interpretation of the mean and standard deviation. The sample size of each group has to be more than 30 to use parametric statistics. The level of clinically acceptable marginal fit has not been established. Further studies are needed.