• Bulletin of the Korean Chemical Society
• /
• v.30 no.8
• /
• pp.1903-1905
• /
• 2009

• Bulletin of the Korean Chemical Society
• /
• v.24 no.7
• /
• pp.911-915
• /
• 2003

Two liquid chromatographic chiral stationary phases (CSPs) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid were successfully applied in the resolution of racemic tocainide and its analogues. In the resolution of tocainide, especially, the CSP containing N-CH₃ amide tethering groups was quite effective, showing clear baseline resolution (RS: 2.66) with reasonable enantioselectivity ( a: 1.25). Consequently, the CSP containing N-CH₃ amide tethering groups is expected to be useful to monitor the enantiomeric composition of tocainide in clinical samples. In addition, the chromatographic behaviors for the resolution of tocainide and its analogues on the two CSPs were found controllable by varying the content and the type of organic and acidic modifiers in aqueous mobile phase.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.2
• /
• pp.155-158
• /
• 1989

The rates of complexation of the 18-C-6 (1,4,7,10,13,16-hexaoxacyclooctadecane) with $K^+,\;Ca^{2+},\;Sr^{2+},\;and\;Ba^{2+}$ in methanol solution have been determined at 25$^{\circ}C$ by a pressure-jump technique. The Eigen Winkler mechanism has been applied to interprete the kinetic data. The results suggest that the rate determining step of the complexation in methanol is the rearrangement of the ligand in the outer sphere ion-dipole pair to form a stable encapsulated complex of the metal ion by the crown ether.

• The korean journal of orthodontics
• /
• v.43 no.6
• /
• pp.271-278
• /
• 2013

Objective: The purposes of this study were to determine the accuracy of crown and root length measurements of premolars using cone-beam computed tomography (CBCT) and to generate reference CBCT-based data on incisor, canine, and premolar lengths in patients with malocclusions. Methods: Imaging was performed using a CBCT scanner with a 0.292-mm voxel size and 12-bit grayscale. The CBCT-based length measurements were compared with direct measurements of 94 subsequently extracted premolars without metal restorations using the paired t-test. Furthermore, the crown and root lengths of incisors, canines, and premolars in 62 Korean patients with malocclusions were measured using CBCT, and Pearson's correlation coefficients were calculated to examine the relationship between the crown and root length measurements of each tooth type. Results: The differences between the CBCT-based and direct measurements of the extracted premolars were not significant, with 95% limits of agreement of -0.90 to 0.90 mm for crown length and -1.23 to 1.18 mm for root length. Weak positive correlations between the crown and root length measurements were observed for the mandibular canine and premolars. Conclusions: The CBCT-based measurements showed a wider range of limits of agreements for root length than for crown length. The CBCT-based data can be used as a reference for evaluating root length and resorption of teeth without metal restorations in patients with malocclusions.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.3
• /
• pp.252-255
• /
• 1992

Preparative methods for and catalytic activities of monoaza-18-crown-6 or monoaza-15-crown-5 in the reaction of 1-bromooctane with aqueous KI or NaI were investigated. Monoazacrown ethers were prepared by debenzylation of N-benzylmonoazacrown ethers, obtained from the reaction of N-benzyldiethanolamine and oligoethylene glycol ditosylate. The phase-transfer catalytic activity of N-benzylmonoazacrown ethers was higher than that of the corresponding monoazacrown ethers.

• Applied Biological Chemistry
• /
• v.40 no.5
• /
• pp.442-446
• /
• 1997

A new analytical method was developed by HPLC after supercritical fluid extraction and fluorogenic derivatization for the determination of quinclorac (3,7-dichloro-8-quinoline carboxylic acid) in soil. The graminicide quinclorac was extracted from soil by supercritical fluid extraction. Supercritical carbon dioxide at 7000 psi $(80^{\circ}C)$ modified with 30% of methanol extracted quinclorac from soil samples at the level of $0.1ng\;g^{-1}$ with 96% recovery. Extracted quinclorac was determined by HPLC as a fluorescent derivative. Derivatization was made with 4-bromomethyl-7-methoxycoumarin (4-Br-Mmc) using 18-crown-6-ether as a catalyst. The conversion was completed within 30 min and the limit of detection was 0.5 ppb to prove that the procedure could be used in the residue analysis of the pesticides containing carboxylic acid group.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.6 no.1
• /
• pp.18-31
• /
• 1997

By the concerns of esthetic restoration were increased recently. many all ceramic crowns were developed. But they except In-Ceram Alumina were used only single crown. In-Ceram Alumina, developed by Dr. Sadon, was revealed to have high flexural Strength(450MPa). So it could be used not only anterior bridges but also posterior bridges. But In-Ceram Alumina was seen to be opaque, a little green color in transillumination light by high content of alumina oxide(85%). So new all ceramics with high strength and high translucence were needed. Spinell($MgAl_2O_3$) have a high melting point, high flexural strength, low heat conductivity, high light conductivity. In-Ceram Spinell offers glasslike light transmission by using the spinell cores instead of the alumina cores. And they have a high translucency like to natural tooth, an excellent margin integrity and a high strength(350MPa). The purposes of this study are 1) to know about the construction method of In-Ceram Spinell System, 2) to investigate the its clinical possibiliy through patients and literature reviews.

• Journal of the Korean Chemical Society
• /
• v.40 no.4
• /
• pp.287-290
• /
• 1996

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.448-453
• /
• 2017

The purpose of this study was to compare the marginal discrepancy of coping crowns according to manufacturing method and materials by using the CAD/CAM system to compare the optimum manufacturing method and materials. The coping crowns were fabricated by using manufacturing methods and materials, and marginal fit was measured using the replica technique. For comparative analysis of manufacturing methods and materials, analysis of variance was performed. One-way ANOVA was performed to compare and analyze different mean values. For the milling method of the alloy, 114.6 was obtained for the MM group, 111.4 for the MS group, 67.2 for the MSC group, and 50.9 for the MSS group, respectively, using the milling/sintering method. In the milling/sintering method of ceramic, 35.6 and 36.3, respectively, were obtained for the SLME group and SLMR group, respectively. However,there was a significant difference according to the material. The milling/sintering method of the ceramic material gave the lowest value, and it was verified by the optimal method. However, marginal discrepancy of coping crowns fabricated using the CAD/CAM system is applicable to the clinic since it corresponds to acceptable numerical values in clinical practice.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.3
• /
• pp.237-242
• /
• 1997

The experiment was conducted to find causes of rooting failure in divided crown of peony cultivation. The results were as follows : In farmer s fields, damage rate of rooting failure in divided crown of peony was 32% as non-sprouting 5.6%, withering after sprouting 20.7%, and wilting after sprouting 5.7%, repectively. Damage degree in farmer s fields was followed, above 70% by 4%, 41 to 70% by 17%, 11 to 40% by 45% per total field area, respectively. It was caused by rooting failure. Damage rate of rooting failure as affected by different planting time was 18.2% for planting in autumn, 42.9% for planting in spring, and damage in divided crown was higher than in seedling. As periods to planting were prolonged, growth and yield were larger poorly, treatment with seminal-root sterilization and soil insecticide showed good growth and rooting but untreated control was very poor. Main cause of rooting failure in divided crown of peony was disease, Cylindrocarpon sp. and low quality of seeds.