• Journal of the Korea Safety Management & Science
• /
• v.18 no.3
• /
• pp.147-154
• /
• 2016

This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and PDA terminal through RFID(Radio Frequency Identification) system and bar-code system in automative transmission shipment place of the finished assembly parts. The proposed model shows that the new method by RF-Tag system can more efficiently perform to reduce processing time and loading time for shipment, compared with the current approach by bar-code system. It is noted in case of the method by RF-Tag that the effects of proposed model are as follows; (a) While the shipping lead time per truck for carrying by the current method was 35 minutes, the shipping lead time by the new method was 15 minutes. (b) While the accuracy for carrying by the current method was 50%, the accuracy by the new method was 99%.

• The Korean Journal of Zoology
• /
• v.34 no.3
• /
• pp.338-351
• /
• 1991

The analysis of the absolute growth in seven body parts of crayfish (Cumbaroides similis Koelbel), such as carapace length, carapace width, abdominal length, abdominal width, sheliped length, second pereiopod length and third pereiopod length (the grolwth formula, y : a + bt ~ci applied) was performed. The results obtained are as follows: 1. The analyses of changing growth quantity for the seven body parts in both sexes showed concave shaped increase. 2. The largest ratios of the grourth quantity in both sexes were revealed in abdominal width (18.3677 times in male and 18.9253 times in female). 3. The srolwth rates of the seven body parts in both sexes showed a smooth increasing pattern. 4. 각B the sperifn'cgrouch rates revealed a decreasing pattern, moreover steep descendent patterns of it appeared in abdominal length of both sexes and abdominal width in male.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.4
• /
• pp.115-122
• /
• 2016

Price quotations for SOR / RFQ from OEM clients is a very important process in the automotive parts industry. However, OEM clients are demanding a price quote on short duration but it takes long delivery time due to sales, research and development, purchasing, production and cost management departments role and jobs focused on detail and responsibility. And to provide a reasonable alternative with eliminating the waste of non-value processes is to achieve OEM clients satisfaction through standardized and parallel processing, IT system based on the systems and processes of global benchmark companies.

• The Journal of Korea Robotics Society
• /
• v.18 no.4
• /
• pp.419-426
• /
• 2023

Assembly tasks are difficult to fully automate due to uncertain errors occurring in unstructured environments. When assembling parts such as electrical connectors, advances in grasping and assembling technology have made it possible for the robot to assemble the connectors without the aid of humans. However, some parts with tight assembly tolerances should be assembled by humans. Therefore, task sharing with human-robot interaction is emerging as an alternative. The goal of this concept is to achieve shared autonomy, which reduces the efforts of humans when carrying out repetitive tasks. In this study, a task-sharing robotic system for assembly process has been proposed to achieve shared autonomy. This system consists of two parts, one for robotic grasping and assembly, and the other for monitoring the process for robot-human task sharing. Experimental results show that robots and humans share tasks efficiently while performing assembly tasks successfully.

• Journal of Environmental Science International
• /
• v.18 no.6
• /
• pp.621-632
• /
• 2009

Rare earth contents(REE) were analysed for the plants, M. sinensis. A. vulgaris and R. crataegitolius, from two different soils serpentine area consisting of serpentinite(SP) and non-serpentine area, containing amphibole schist(AS) of Gapyeong area, and were compared with soils and host rocks. The AS were high with the differences of several times in the top soils, and with the differences of several to ten times in the host rocks relative to the SP. In the same area, the SP were high in the soil, but the rocks for the AS. In the plants, the A. vulgaris were high, but low in the R. crataegitolius. Root parts were higher than the upper parts. Differences between the upper and root parts were big in the SP rather than the AS, and were big in the R. crataegitolius, but small in the M. sinensis. Among the parts of the plants, high elements were shown in the R. crataegitolius of the SP, and the A. vulgaris and M. sinensis of the AS. In the correlation coefficients, most of the REE showed positive relationships among the element pairs, especially high positive correlation coefficients in the upper parts of the SP.Differences of the soils and plants(average) were smalle in the M. sinensis and big in the R. crataegitolius. In the upper parts. contents of the A. vulgaris were close to the soils while the R. crataegitolius showed large discrepancies with the soils. In the root parts, contents of the A. vulgaris showed discrepancies with the soils regardless of soil types, but close in the R. crataegitolius of the SP and M. sinensis of the AS.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.5
• /
• pp.23-28
• /
• 2001

• Journal of Powder Materials
• /
• v.5 no.3
• /
• pp.199-209
• /
• 1998

A new low melting inorganic binder, monoclinic $HBO_2$, has been developed for Selective Laser Sintering (SLS) of alumina powder by dehydration process of boron oxide powder in a vacuum oven at $120^{\circ}C$. It led to better green SLS parts and higher bend strength far green and fired parts compared to other inorganic binders such as aluminum and ammmonium phosphate. This appeared to be due to its low viscosity and better wettability of the alumina particle surface. A low density single phase ceramic, aluminum borate ($Al_{18}B_4O_{33}$), and multiphase ceramic composites, $A_{12}O_3-A_{14}B_2O_9$, were successfully developed by laser processing of alumina-monoclinic $HBO_2$ powder blends followed by post-thermal processing; both $Al_{18}B_4O_{33}$ and $A_{14}B_2O_9$ have whisker-like grains. The physical and mechanical properties of these SLS-processed ceramic parts were correlated to the materials and processing parameters. Further densification of the $A_{12}O_3-A_{14}B_2O_9$ ceramic composites was carried out by infiltration of colloidal silica, and chromic acid into these porous SLS parts followed by heat-treatment at high temperature ($1600^{\circ}C$). The densities obtained after infiltration and subsequent firing were between 75 and 80% of the theoretical densities. The bend strengths are between 15 and 33 MPa.

• Journal of the Korean Society of Costume
• /
• v.65 no.3
• /
• pp.15-27
• /
• 2015

This study is the first research that examines the fashion manufacturers and merchants of the late 18th century France. Fashion specialists, (known as) Marchande de modes, started to appear in literature in the mid 18thcenturyandthe profession was officially recognized by the guild system in 1776. Rose Bertin was elected as the first representative. At the same time, there were two types of fashion specialists, tailleur and couturi${\grave{e}}$re. Tailleur had monopolized the production of the bodice and the skirt, which were the most important female dress parts. On the contrary, couturi${\grave{e}}$re only had the right to make petticoats, but they were not allowed to decorate it. In 1781, the couturi${\grave{e}}$re obtained the right to make and decorate the other parts of the dress, and this resulted in the two groups fighting over the rights to make dresses. And during this struggle, the Marchand de modes started to appear as a new occupation. Marchande de modes were privileged fashion merchants making or selling trimmings for dress and coiffure, and had authority to make capes and bonnets. Contemporary critics praised their talents for creating innovative and beautiful fashion styles, while some criticized them as women who just made luxury items. These records revealed how marchande de modes were viewed during that time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.1
• /
• pp.56-62
• /
• 2011

This study was conducted to investigate antioxidative and physiological activities of ethanol extracts from different parts (flower, leaf, root, and the whole plant) of Taraxacum officinale. The ethanol extracts from different parts were measured to examine total flavonoids content, total polyphenol content, elect ron donating ability,superoxide dismutase (SOD)-like activity, nitrite-scavenging ability and tyrosinase inhibition effects. Total flavonoids content in leaf extract (41.66 mg/g) and total polyphenol content in flower extract (71.91 mg/g) were higher than those of other parts. All assays were conducted at concentrations of 0.1, 0.3, 0.5, and 1 mg/mL ethanol extracts. The electron donating abilities of leaf, flower, the whole plant, and root extracts were 92.25%, 88.18%, 84.55% and 83.40%, respectively, at a concentration of 1 mg/mL. The activities were concentration dependent. The SOD-like activity of ethanol extracts from different parts was 8.40~11.20% at a concentration of 1 mg/mL. The nitrite-scavenging abilities of flower and leaf extracts measured at pH 1.2 were 47.37% and 47.18%, respectively, at a concentration of 1 mg/mL, which were higher than those of the whole plant and root extracts. Tyrosinase inhibition activity of the leaf extract at a concentration of 1 mg/mL was the highest (34.22%) and that of the whole plant and root extracts was shown to be more than 20%. These results suggest that ethanol extracts from different parts of Taraxacum officinale could be used as antioxidative functional food sources.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.25-30
• /
• 2010

The authors have studied on the corrosion resistance of the hot stamped steel sheets for the application to automotive parts. Recently automotive companies have focused on the hot stamped parts to meet the light weighting needs and the safe reason. Because of the cost reduction of the hot stamped parts, automotive companies increase the usage of the coated steel sheets, especially Al-Si coated steel sheets. The coated layer of Al-Si coated steel sheets contains up to 50% of Fe, which was diffused from the steel sheet, after hot stamping. The hot stamped steel sheet was not phosphated due to the oxidation layer of the coating, however, the result of the water resistance test is similar to that of the conventional GA steel sheets. The pitting depth and the weight reduction of the coated layer of hot stamped steel sheets are less than those of GA steel.