• Journal of the Korean Society for Heat Treatment
• /
• v.19 no.2
• /
• pp.83-89
• /
• 2006

The surface phase changes, the hardness variations, the nitrogen contents and the corrosion resistances of 17-4 PH stainless steel have been investigated after nitrogen permeation(solution nitriding) at a temperature ranges from $1050^{\circ}C$ to $1150^{\circ}C$ The phases appeared at the nitrogen-permeated surface layer were shown to martensite plus austenite and austenite, depending on the variation of nitrogen and chromium contents. And the surface hardness was also depended on the phases appeared at the surface layer from 370 Hv to 220 Hv. The precipitates exhibited at the nitrogen-permeated surface layer were niobium nitride, niobium chromium nitride and carbo-nitride in the austenite and martensite matrices. The surface nitrogen contents were followed by the Cr contents of the surface layers, representing 0.55% at the temperatures of $1050^{\circ}C$ and $1150^{\circ}C$ respectively, and 0.96% at $1100^{\circ}C$ at the distances of $60{\mu}m$ from the outmost surface. From the comparison of the corrosion resistances between nitrogen-permeated and solution-annealed steels, nitrogen permeation remarkably improved the corrosion resistance in the solution of 1 N $H_2SO_4$ due to the increase of nitrogen content in the surface austenite phase.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.305-308
• /
• 2001

Powder injection molding (PIM) uses the shaping advantage of injection molding but is applicable to metals and ceramics. This process combines a small quantity of polymer with an inorganic powder to form a feedstock that can be molded. After shaping, the polymeric binder is extracted and the powder is sintered often to near-theoretical densities. Accordingly, PIM delivers structural materials in a shaping technology previously restricted to polymers. The process overcomes the shape limitations of traditional powder compaction, the costs of machining, the productivity limits of isostatic pressing and slip casting, and the defect and tolerance limitations of casting. The 17-4 PH stainless steel powders with average diameter of $10{\mu}m$ were injection-molded into flat tensile specimens. Sintering of the compacts was carried out at the various temperatures ranging from 900 to $1350^{\circ}C$. Sintering behavior of the compacts and tensile properties of sintered specimens were investigated.

• Journal of the Korean Society for Heat Treatment
• /
• v.6 no.3
• /
• pp.152-158
• /
• 1993

Effects of oxide film which is grown by heat treatment on the hydrogen embrittlement (HE) of 17-4 PH stainless steel were investigated. Specimems were tensile tested after cathodic hydrogen charging and the be haviors of HE were evaluated from the elongation change. It was found that specimems solution treated at $1040^{\circ}C$ for 1/2hour showed best retardation ability to HE for both aging conditions i.e. $480^{\circ}C{\times}1hr$ and $620^{\circ}C{\times}4hrs$. X-ray and Auger study revealed that the major composition of oxide films are $Cr_2O_3$ and $CuCr_2O_4$.

• Journal of Korea Foundry Society
• /
• v.13 no.2
• /
• pp.163-167
• /
• 1993

Mechanical and chemical properties of the 17-4PH have been investigated after recycled melting. As the result, it has been ascertained that the change of Ni, Cu, Nb, C amount affects the mechanical and chemical properties. It is important to minimize contamination of impurities and to control the amount of Ni, Cu, Nb, C.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.23-23
• /
• 2003

분말야금된 소결체의 가장 큰 특징 중의 하나는 피할 수 없는 소결체의 기공이다. 이러한 기공이 기계적 특성에 미치는 영향에 관해서는 많은 연구가 오래 전부터 진행되었었다. 그러나 기존의 연구는 거의 대부분 일반 분말야금에 의한 것이고 분말사출성형된 소결체의 기공율과 기계적 특성 광계는 거의 연구가 이루어 지지 않았다. 본 연구에서는 기공율의 조절이 용이한 분말사출성형 공정을 이용하여 소결 초기부터 완전 치밀화에 가까운 조직까지 다양한 소경율의 시편을 만들어 기계적 특성에 미치는 순수기공의 영향은 조사하기 위해 다음과 같이 조사하고자 하였다. 사출성형에 사용된 재료는 고강도 이며 내식성이 뛰어난 17-4 PH STS이고 평균 입경은 10mm였다. 열분해와 소결은 수소 분위기에서 행하였으며 소결온도는 900~$1350^{\circ}C$였다. 연구수행을 통해 다음과 같은 결론을 얻었다. 1. 기공율과 기계적 특성의 관계는 닫힌 기공이 지배하는 고밀도 영역과 열린 기공이 지배하는 저밀도 영역을 분리하여 해석해야한다. 2. 저밀도 영역에서의 기공율과 강도의 관계는 넥 성장에 따른 load bearing area의 증가로 나타낼 수 있고 아래와 같다. $\frac{\delta}{\delta_o}=1-\frac{P}{P_i}$ 3. 고밀도 영역에서의 기공율과 강도의 관계는 소결 현상과 초기 충진율을 고려한 ideal pore모델을 도입하였고 아래와 같이 나타났다. $\frac{\delta}{\delta_o}=1-1.95(P_i\;{\cdot}\;P)^{2/3}$

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.431-440
• /
• 2015

Objective : The purpose of this study was to investigate the relations between accuracy score and the motions which are performed in PyeongWon Poomsae, thereby developing objectivity in accuracy evaluations for Poomsae competitions. Method : The subjects were six male Poomsae players (age: $21.2{\pm}1.17yrs$, height: $173.4{\pm}3.95cm$, weight: $67.7{\pm}7.65kg$). A three-dimensional motion analysis was performed on the subjects using six high-speed cameras (60 frames/sec) and subjects' performed motions were evaluated by 5 evaluators. The entire Pyeong Poomsae was divided into 13 events and 9 phases; there were three pairs of symmetric phases among them: front kick & turning side kick phases (3PH, 3-1PH), arm motion & stance phases (4PH, 4-1PH), side kick with Hakdari-stance phases (5PH, 5-1PH). Performance time, change and range of COM, height of vertex, and foot of side kicks were analysed. The Data was analysed utilizing correlation analysis. Results : There was a positive correlation between accuracy score and the difference between right and left range of COM (X direction) at 4PH (r=0.921, p=0.009). Conclusion : The results of our study indicate that it is necessary to consider some of objective criterion such as performance time, COM range, and symmetrical movements in accuracy evaluations of Poomsae competitions.

• Journal of Korea Foundry Society
• /
• v.12 no.5
• /
• pp.397-402
• /
• 1992

The effect of the solution & aging treatment on the tensile strength, yield strength, elongation, reduction of area, hardness was studied in the 17-4 PH stainless steel. SEM pictures were also taken in order to examine the fracture surfaces and precipitated particles. X-ray diffraction patterns for the heat treated samples were also observed. Mechanical properties of the heat treated samples were superior to those of as cast samples. Tensile strength, yield strength, hardeness decreased with the increase of aging temperature. On the other hand, elongation and reduction of area increased as the aging temperature increased.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1211-1216
• /
• 1998

Bis(diethyldithiocarbamato)ioxomolybdenum(VI), cis-MoO2(S2CNEt2)2, 1, reacted with chlorotrimethylsilane (Me33SiCl) to give a seven-coordinate, pentagonal bipyramidal complex MoOC12(S2CN]Et2)2, 3, in which the oxo ligand is trans to the chloride ligand and the two chloride ligands are mutually cis. The monooxo molybdenum complex bis(diethyidithiocarbamato)oxomolybdenum(IV), MoO(S2CNEt2)2, 2, reacted with phenyl isocyanate (PhNCO) to give an Mo dimer MO2{μ-N(CONPh)Ph}(μ-NPh)(NPh)2(S2CNEt2)2, 4, which contains an Mo-Mo bond, two diethyldithiocarbamato ligands, two terminal imido (NPh) ligands, and two bridging hnido (NPh) ligands. One of the two bridging NPh ligands seemed to have been attacked by the electrophilic phenyl isocyanate carbon, which suggests that the bridging imido NPh ligand is more nucleophilic than the terminal one. Crystallographic data for 3: monoclinic space group P21/c, a=8.908(l) Å, b=17.509(3) Å, c=12.683(2) Å, β=110.15(1)°, Z=4, R(wR2)=0.0611(0.1385). Crystallographic data for 4-THF: orthorhombic space group P212121, a=17.932(4) Å, b=22.715(5) Å, c=11.802(3) Å, Z=4, R(wR2)=0.0585(0.1286).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.3
• /
• pp.253-261
• /
• 2012

We investigated the reproductive capacity of starry flounder Platichthys stellatus from the Uljin (UJ) marine ranching area and compared it to that of P. stellatus from the coastal waters of Pohang (PH). In UJ, female gonadosomatic index (GSI) peaked in October ($3.14{\pm}0.87$) and male GSI was high in October and December. In PH, female GSI peaked in January ($18.64{\pm}2.15$) while male GSI began to increase in October and remained high until March. Most ovaries of UJ females were immature with perinucleus oocytes, although the testes of UJ males were ripe in January. Both the ovaries and testes of PH starry flounders were ripe from January to March. The plasma estradiol-$17{\beta}$ ($E_2$) levels of UJ females were highest in October ($4.09{\pm}1.90$ ng/mL) although the testosterone (T) levels of UJ males were highest in December ($3.81{\pm}0.78$ ng/mL) and decreased gradually until April. The $17{\alpha}$,$20{\beta}$-dihydroxy-4-pregnen-3-one ($17{\alpha}20{\beta}P$) levels of UJ females were not detected. The E2 levels of PH females were highest in December ($36.25{\pm}33.07$ ng/mL) and $17{\alpha}20{\beta}P$ levels were highest in March ($5.51{\pm}0.95$5 ng/mL). The T levels of PH males were highest in December ($4.03{\pm}1.34$ ng/mL) and decreased gradually until October. Taken together, these results suggest that most females from UJ did not reach maturation with a spawning period that was considered to be between December and January.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.375-378
• /
• 2003

In the present study, a new approach to predict the strength of sintered materials has been carried out and a new framework combining neck growth model and ideal pore model has been established based on the results of tensile tests on powder injection molded specimens with the various porosity. Powder injection molding (PIM) uses the shaping advantage of injection molding but is applicable to metals and ceramics. PIM delivers structural materials in a shaping technology previously restricted to polymers. 17-4 PH stainless steel powders with average diameters of 10 $\mu\textrm{m}$ were injection-molded into flat tensile specimens sintered at the various temperatures ranging from 900 to 1350$^{\circ}C$ for 1h. The relationships between strength and porosity were applied to the experimental results and verified.