• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.483-491
• /
• 2015

This paper describes the design optimization of parasitic elements used for TACAN broadband antenna. We deployed parasitic elements arranged in a circular array to electronically rotate the antenna instead of employing a mechanically rotated antenna to generate the composite radiation pattern of 15 Hz and 135 Hz including bearing information and to meet the harmonic contents specification of MIL-STD-291C. We performed the simulation for optimization of the parasitic elements and fabricated the antenna composed of 16 parasitic elements of 15 Hz and 63 parasitic elements of 135 Hz. With harmonics magnitude reduction by increasing the number of steps using vector composition of the reflectors, the measured result meets the specification of MIL-STD-291C.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.4
• /
• pp.31-40
• /
• 2015

Various types of inorganic and organic colloids are present in natural water including groundwater. Previous studies showed that Fe, Mn and Al are colloid-forming elements and dissolved concentrations can be erroneous for these elements if water samples are not properly filtered. Dissolved concentrations of elements including Ca, Na, Mg, K, Fe, Mn, Si and Al in groundwater from alluvial and bedrock aquifers, and surface water near Nakdong River were determined to evaluate effects of colloids on dissolved concentrations in natural water samples using various pore sizes of filters. Groundwater is mostly anoxic and have elevated concentrations of Fe and Mn, which provides a unique opportunity to observe the effects of colloids on dissolved concentrations of colloid-forming elements. Membrane filters with four kinds of pore sizes of 1000 nm, 450 nm, 100 nm, and 15 nm were used for filtration of water samples. Concentrations of dissolved concentrations in each filtrate did not show significant differences from 1000 nm to 100 nm. However, concentrations of all elements considered were decreased in the filtrates obtained using 15 nm pore size filters by 10 to 15% compared to those using 450 nm except for bedrock groundwater. Al in surface water showed a distinct linear decrease with the decrease of filter pore sizes. These results showed that 100 nm pore size had little effect to remove colloidal particles in alluvial groundwater and surface water in our study. In contrast, significant concentration decreases in 15 nm pore size filtrates indicate that the presence of 15 to 100 nm colloidal particles may affect determination of dissolved concentrations of elements in natural water.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.15 no.1
• /
• pp.57-65
• /
• 2011

In this paper, a good quality mesh generation for the finite element method is investigated for artificial hip joint simulations. In general, bad meshes with a large aspect ratio or mixed elements can give rise to excessively long computational running times and extremely high errors. Typically, hexahedral elements outperform tetrahedral elements during three-dimensional contact analysis using the finite element method. Therefore, it is essential to mesh biologic structures with hexahedral elements. Four meshing schemes for the finite element analysis of an artificial hip joint are presented and compared: (1) tetrahedral elements, (2) wedge and hexahedral elements, (3) open cubic box hexahedral elements, and (4) proposed hexahedral elements. The proposed meshing scheme is to partition a part before seeding so that we have a high quality three-dimensional mesh which consists of only hexahedral elements. The von Mises stress distributions were obtained and analyzed. We also performed mesh refinement convergence tests for all four cases.

• Architectural research
• /
• v.24 no.2
• /
• pp.29-40
• /
• 2022

The transition from manufacturing to service-based economies in highly developed societies during the post-industrial period resulted in the decline of the industrial landscape, leaving it abandoned or underutilized. In pursuit of revitalizing the obsolete industrial space, innovative design techniques based on adaptive reuse are applied to retrofit modern functions to create a new cultural space and preserve the historical, symbolic, and cultural importance of the abandoned industrial facilities. Design considerations based on facade redesign have proven to be one of the most adopted techniques that can help in recreating a new function for the vacant industrial buildings and integrating them into the present-day urban fabric. This paper examines the facade renovation elements used for the adaptive reuse of 15 abandoned industrial buildings presently used as multi-purpose facilities in South Korea. Through a questionnaire survey, this study analyzes the respondents' preference for different facade renovation elements in the 15 sites according to age and gender. The study found that both genders showed similar preference patterns between most elements. But on some elements, females were keener and expressed a stronger opinion than males. There were much more females than males who perceived color and material as the most important exterior elements. The findings of this study can be used for the adaptive reuse of industrial buildings according to user preferences for different facade renovation elements.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.71-78
• /
• 2023

This study presents the direction of data triggers and elements to be recorded in automated vehicles in the future in relation to the event data recorder (EDR) and data storage system for automated driving (DSSAD). It does not distinguish between the EDR and DSSAD, but suggests data triggers and elements in preparation for overall automated vehicle accidents and dangerous situations. To propose, the current status of discussions on EDR/DSSAD internationally and the case of investigating accidents with automated vehicles under temporary driving licenses in Korea were analyzed. Based on the analysis, the direction of data triggers and elements of the EDR/DSSAD of automated vehicles were presented.

• Microbiology and Biotechnology Letters
• /
• v.20 no.4
• /
• pp.377-383
• /
• 1992

Seven strains of Bacillus thuringiensis were isolated from soil in Korea and characterized. The isolates were named HL-8, 10, 12, 13, 14, 15 and 16 which produced parasporal crystals and endospores in their cells. The biochemical characteristics of the seven isolates were only minor different in specific chracteristics to the known serotypes of Bacillus thuringiensis. The number of the plasmid DNA elements from the isolates were studied. The computerized molecular weights of the six plasmid elements in the HL-8 and HL-lO strains were from 3.01 to 15.1 Md, four plasmid elements in the HL-12 were from 5.4 to 21.9 Md, four plasmid elements in HL-13 were from 5.1 to 20 Md, three plasmid elements in HL-15 were from 3.4 to 11.3 Md and three plasmid elements in the HL-16 were from 2.4 to 20.1 Md. The seven isolates showed resistances to ampicillin, bacitracin, cephalothin, methicillin and penicillin G. The strains of HL-8, HL-lO, HL12, HL-14, HL-15 and HL-16 showed lethalities against Culex pipiens 3rd instar larvae. The HL8 and 14 strains showed 100% lethality to the larvae within 48 hours. HL-13 strain did not have toxicity against the larvae.

• Journal of the Korean Society for information Management
• /
• v.23 no.3 s.61
• /
• pp.241-264
• /
• 2006

This study suggested indispensable elements of metadata for electronic resource management and effectively manage of electronic resource in library. Therefore, this research analyzed into the data elements of DLF ERMI's ERMS data structure, foreign three universities. The Data elements are verified by domestic ERM specialist. As the result, trial categories are 12 elements, consortium categories are 15 elements, license categories are 33 elements, electronic resource information categories are 21 elements, access/administrative information categories are 20 elements, usage statistics categories are 13 elements, workflow categories are 14 elements, contact information categories are 18 elements.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.1
• /
• pp.15-20
• /
• 1993

X-ray diffractograms of the vessel elements and the wood fibers of Quercus variabilis BLUME were recorded and resolved into characteristic reflections of cellulose I. Some differences were observed in the ratio of integrated intensity and crystallinity index between vessel elements and wood fibers. Present results suggest that cellulose crystal structure in the hardwood species was varied with the elements of wood.

• Genomics & Informatics
• /
• v.15 no.4
• /
• pp.170-177
• /
• 2017

HOTAIR is an lncRNA that has been known to have an oncogenic role in different cancers. There is limited knowledge of genetic and epigenetic elements and their interactions for the gene encoding HOTAIR. Therefore, understanding the molecular mechanism and its regulation remains to be challenging. We used different in silico analyses to find genetic and epigenetic elements of HOTAIR gene to gain insight into its regulation. We reported different regulatory elements including canonical promoters, transcription start sites, CpGIs as well as epigenetic marks that are potentially involved in the regulation of HOTAIR gene expression. We identified repeat sequences and single nucleotide polymorphisms that are located within or next to the CpGIs of HOTAIR. Our analyses may help to find potential interactions between genetic and epigenetic elements of HOTAIR gene in the human tissues and show opportunities and limitations for researches on HOTAIR gene in future studies.

• KIEAE Journal
• /
• v.15 no.4
• /
• pp.61-68
• /
• 2015

[Purpose] Recently, skyscrapers have sharply increased throughout the world, including South Korea. Although a skyscraper has its own merit such as the landmark of a city, it also has various problems like massive energy consumption. This study is aimed to establish the concept of environment-friendly skyscraper and propose a plan to realize skyscraper after analyzing the architectural, facility and environmental friendly elements of skyscrapers. [Method] This study lists up skyscrapers over 40 floors and 200 meters high. Upon 10 constructed buildings, it analyzes their basic plans and the green building technologies applied to them and suggests effective and environment-friendly architectural plan. [Result] This study examined the distinctions of the layout, shape, facade, and floor plan plane of 10 skyscrapers and found out specific techniques to be used for the use plan of natural energy, plan for saving resources and reducing wastes and a plan for environmental architecture and system.