• 한국분말재료학회지
• /
• 제29권1호
• /
• pp.28-33
• /
• 2022

Aluminum-based powders have attracted attention as key materials for 3D printing owing to their low density, high specific strength, high corrosion resistance, and formability. This study describes the effects of TiC addition on the microstructure of the A6013 alloy. The alloy powder was successfully prepared by gas atomization and further densified using an extrusion process. We have carried out energy dispersive X-ray spectrometry (EDS) and electron backscatter diffraction (EBSD) using scanning electron microscopy (SEM) in order to investigate the effect of TiC addition on the microstructure and texture evolution of the A6013 alloy. The atomized A6013-xTiC alloy powder is fine and spherical, with an initial powder size distribution of approximately 73 ㎛ which decreases to 12.5, 13.9, 10.8, and 10.0 ㎛ with increments in the amount of TiC.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.41-47
• /
• 2019

In conventional machining, the use of cutting fluid is essential to reduce cutting heat and to improve machining quality. However, to increase the performance of cutting fluids, various chemical components have been added. However, these chemical components during machining have a negative impact on the health of workers and cutting environment. In current machining, environment-friendly machining is conducted using MQL (minimum quantity lubrication) or cryogenic air spraying to minimize the harmful effects. In this study, the injection nozzle that can combined injecting minimum quantity lubrication(MQL) and cryogenic gas was designed and the shape optimization was performed by using computational fluid dynamics(CFD) and design of experiment(DOE). Performance verification was performed for the designed nozzle. The diameter of the sprayed fluid at a distance of 30 mm from the nozzle was analyzed to be 21 mm. It was also analyzed to lower the aerosol temperature to about 260~270K.

• Journal of Plant Biology
• /
• 제21권1_4호
• /
• pp.13-21
• /
• 1978

The effect of cyclic-AMP on the induction of acid phosphatase activity in barley aleurone layers was examined. Tannic acid was used as a inhibitor. Decursinol and coumarin were also used as a comparison. Maxiumu promotion of the enzyme activity was obtained with 10-5M cyclic-AMP, but this promotion was lower than that of 10-5M GAS induced enzyme activity in incubation medium. The inhibition rate in the addition of tannic acid was shown 17% and 63% at a ratio to GAs (by weight) of 10 : 1, and 58% and 94% at a ratio of 100 : 1 treated with GAs, and cyclic-AMP, respectively. The most potentiation of 10-6M GAS effect was induced by the additiion of suboptimal concentration (10-6M) of cyclic-AMP. Additional GAs and cyclic-AMP were shown the recovery of the enzyme activity inhibited by tannic acid. The combination with cyclic-AMP and theophylline enhanced the enzyme activity, too. Any other nucleotides tested except cyclic-AMP didn't show the action. There were no differences in acid phosphatase isozyme patterns by polyacrylamide disc electrophoresis, in conjunction with the different additions but the size of bands showed great differences. Especially, the 3rd band and the 5th band group were remarkable.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2325-2332
• /
• 2012

A series $[C_3Omim]$[X] of imidazolium cation-based ILs, with ether functional group on the alkyl side-chain have been synthesized and structure of the materials were confirmed by various techniques like $^1H$, $^{13}C$ NMR spectroscopy, MS-ESI, FTIR spectroscopy and EA. More specifically, the influence of changing the anion with same cation is carried out. The absorption capacity of $CO_2$ for ILs were evaluated at 30 and $50^{\circ}C$ at ambient pressure (0-1.6 bar). Ether functionalized ILs shows significantly high absorption capacity for $CO_2$. In general, the $CO_2$ absorption capacity of ILs increased with a rise in pressure and decreased when temperature was raised. The obtained results showed that absorption capacity reached about 0.9 mol $CO_2$ per mol of IL at $30^{\circ}C$. The most probable mechanism of interaction of $CO_2$ with ILs were investigated using FTIR spectroscopy, $^{13}C$ NMR spectroscopy and result shows that the absorption of $CO_2$ in ether functionalized ILs is a chemical process. The $CO_2$ absorption results and detailed study indicates the predominance of 1:1 mechanism, where the $CO_2$ reacts with one IL to form a carbamic acid. The $CO_2$ absorption capacity of ILs for different anions follows the trend: $BF_4$ < DCA < $PF_6$ < TfO < $Tf_2N$. Moreover, the as-synthesized ILs is selective, thermally stable, long life operational and can be recycled at a temperature of $70^{\circ}C$ or under vacuum and can be used repeatedly.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.528-528
• /
• 2012

Recently, atmospheric pressure plasmas attract lots of interests for the useful applications such as surface modification and bio-medical treatment. In this study, a particle-in-cell Monte Carlo collision (PIC-MCC) simulation was adopted to investigate the discharge characteristics of a planar micro dielectric barrier discharge (DBD) with a driving frequency from 13.56 MHz to 162.72 MHz and with a gap distance of 80 micrometers. The variation of frequency, in the change in the electron energy probability function (EEPF). Through the relation between the ion trajectories and the frequency, results in the change of EEPFs is achievable with the turning point of frequency mode. Therefore, it is possible to categorize the efficient operation range of DBDs for its applications by controlling the interactions between plasmas and neutral gas for the generation of preferable radicals.

• 한국건축시공학회지
• /
• 제13권5호
• /
• pp.457-464
• /
• 2013

Traditionally, the material used for the form in reinforced concrete construction has been wood or steel. But recently, aluminum forms have been widely used in wall structures such as apartment buildings. Aluminum is light, easy to handle, and economically advantageous, but the hydrogen gas created due to its reaction with the alkali component in concrete gives rise to air pockets on the concrete's surface, and deteriorates the surface's finishability. In this research, to determine the influence of aluminum material on concrete, the cement paste W/C and its chemical reactivity in alkali and acid solution were analyzed. As a prevention plan, the influence of the number of applications of calcium hydroxide and various surface coating materials was analyzed. Through the analysis, it was found that the surface voids on the aluminum form are the result of the reaction of hydrogen gas with an alkali such as $Ca(OH)_2$. This can be prevented by the surface treatment of $Ca(OH)_2$, separating material and coating material. However, poor surface form and damages to the form are expected to cause quality degradation because of the aluminum-concrete interaction. Therefore, thorough surface treatment, rather than the type of separating material or coating material, is considered the most important target of management.

• 한국전기전자재료학회논문지
• /
• 제13권3호
• /
• pp.265-272
• /
• 2000

In this paper the corona discharge in SF$_{6}$ gas used as insulating material in lots o high voltage equipment, is simulated by finite element method with Flux-Corrected Transport(FCT) method. By application of proposed method the negative corona discharge characteristics in needle to plane electrode is analyzed with time step. For the accuracy of analysis the secondary electron emission by photon and ion are also considered as well as the accuracy of analysis the secondary electron emission by photon and ion are also considered as well as townsend first ionization and electron attachment. The calculated results show that the electric field intensity between anode and ion group is decreased as times go-by according to field distortion by those space charge. Accordingly the electron density is decreased strongly by the attatchment effect of SF6 gas so that the corona discharge becomes extinguished abruptly.y.

• Pediatric Infection and Vaccine
• /
• 제12권1호
• /
• pp.52-60
• /
• 2005

목 적 : 류마티스열이나 사구체신염과 같은 합병증의 집단발생 및 GAS 감염의 역학조사를 위해서는 감염균의 혈청형분석이 필수적이다. T 단백은 GAS의 역학적 상황을 이용하는데 유용하여 선별검사로 가장 많이 이용한다. 혈청형 검사의 단점을 보완하기 위해 최근 분자생물학적 방법을 이용하기 시작하였다. 중합효소연쇄반응으로 emm 유전자를 증폭하여 자동염기서열 분석기를 이용한 emm형별 분석이 최근에 보고가 되고 있다. 그래서 저자들은 emm 유전자를 이용한 자동염기서열 분석과 T 혈청학적 분석을 통하여 마산의 어느 한 센터에서 얻은 GAS의 계절별 분포에 대해서 알고자 하였다. 방 법 : 2003년 6월부터 2004년 2월까지 경남 마산시에 위치한 창원파티마병원에서 급성 인두염이나 성홍열 또는 봉소염이 의심되는 환아에게 인후배양을 시행하였고, 그 중 GAS로 동정된 100개의 균주를 분리하여 미국 미네소타대학의 WHO Collaborating Center on Group A Streptococci에 보내 T 항원형을 혈청학적 동정을 하였고 emm 유전자 분석을 하였다. 이 결과들을 다시 계절별과 질병별로 분류하였다. 결 과 : T단백 혈청형은 총 19종이 분리되었다. 계절별로 분류하면 여름철에는 빈도순으로 T4(27.5%), T1(17.6%), T6(13.7%), T12(13.7%)이 흔히 분리되었고, 겨울철에는 T4(28.3%), T12(15.2%), T12/B3264(8.7%)의 순서로 흔히 발생하였다. T4, T12는 계절별로 변화가 거의 없었다. 질환별로 분리하면 급성 인두염은 89례를 차지하였는데 T 혈청형을 빈도순으로 나열하면 계절별 분포에서와 마찬가지로 T4(26.7%), T12(14.0%), T1(12.8%), T6(11.6%) 순으로 전체 균주의 빈도순과 동일한 양상을 보였다. emm 유전자형은 총 15종류가 분류되었다. emm 1, emm 6, emm 9, emm 44는 겨울철에 많이 감소하거나 없어졌고, emm 3, emm 12, emm 89는 겨울철에 새로 생기거나 빈도가 비교적 많이 증가한 유전자형이었다. 급성 인두염에서 emm 유전자형을 빈도순으로 나열하면 계절별 분포에서와 마찬가지로 emm 4(26.7%), emm 22(18.6%), emm 1(12.8%), emm 6(11.6%)의 순서로 분리되었다. 결 론 : 2003년과 2004년에 걸쳐 조사한 T단백 혈청형과 emm 유전자형의 계절별 분포는 각각 19종과 15종으로 다양하게 분리되었다. 이 중 EM 내성과 관련이 있는 T 혈청형으로는 T12, T28, T4, T1, NT 등으로 알려져 있는데 이들의 비율이 전체의 56.7%를 차지하였다. 따라서 항생제 선택에 있어서 EM 내성률이 높다는 사실을 고려해야 한다. T 혈청형과 emm 유전자형의 분석이 GAS 질병의 역학과 병인을 연구하는데 도움이 되므로 앞으로 매년 감시를 해야하고, 특히 침습성 연쇄구균 감염으로부터 얻은 GAS을 T 혈청형 분석과 emm 유전자형 분석을 통해서 감시해야 하겠다.

• 한국안전학회지
• /
• 제34권6호
• /
• pp.13-21
• /
• 2019

Leakage accidents in businesses dealing with hazardous chemicals can have a great impact on the workers inside the workplace, as well as residents outside the workplace. In fact, there were cases where hazardous chemicals leaked from many businesses. As a result, the Chemicals Control Act(CCA) was enacted in 2015, the Ministry of Environment introduced an Off-site Risk Assessment(ORA). The purpose of the ORA is to secure safety from the installation of the design of the workplace facilities so that chemical accidents of hazardous chemical handling facilities do not cause human or physical damage outside the workplace. In general, the ORA qualitatively determines where a protected facility is within the scope of the accident scenario. However, elderly who belong to the sensitive group is more sensitive than the general group under the same chemical accident effect, and the extent of the damage is serious. According to data from the Korea National Statistic Office, the number of elderly people is expected to increase steadily. Therefore, a quantitative risk analysis considering the elderly is necessary as a result of a chemical accident. In this study, accident scenarios for 14 locations were set up to perform emergency evacuation due to toxic gas leakage of Cl₂(Chlorine) and HF(Hydrogen Fluoride), and the effects of exposure were analyzed based on the evacuation velocity difference of age 20s and 60s. The ALOHA(Areal Locations of Hazardous Atmospheres) program was used to calculate the concentration for assessing the effects. The time of exposure to toxic gas was calculated based on the time it took for the evacuation to run from the start point to the desired point and a methodology was devised that could be applied to the risk calculation. As a result of the study, the relative risk of the elderly, the sensitive group, needs to be determined.

• 대한전자공학회논문지SD
• /
• 제38권8호
• /
• pp.13-19
• /
• 2001

분자선 결정 성장법을 이용하여 성장된 서로 다른 장벽층의 두께를 갖는 $Al_{0.3}Ga_{0.7}N$ heterojunction field effect transistors (HFETs) 를 제작하여 그 특성을 비교, 관찰하였다. $Al_{0.3}Ga_{0.7}N$층의 두께에 따른 특성의 비교로부터 최적의 2 차원 전자개스 (2 dimensional electron gas) 를 가질 수 있는 $Al_{0.3}Ga_{0.7}N$/GaN HFET 소자 구조를 얻을 수 있었다. $L_g=0.6$ ${\mu}m$ 와 $W_g=34\;{\mu}m$ $Al_{0.3}Ga_{0.7}N$/GaN (20 nm/2 mm) HFET에서 Imax ($V_{gs}=1\;V$) 와 $G_{m,maX}$는 각각 1.155 A/mm 및 250ms/${\mu}m$ 이었으며 $F_t=13$ GHz 와 $F_{max}=48$ GHz의 우수한 고주파 특성을 얻을 수 있었고 2 inch 기판상에서 제작된 소자들은 5% 이하의 매우 균일한 DC 특성을 나타내었다. 이와 더불어 게이트-드레인 간의 간격에 따른 소자의 특성을 관찰함으로서 소자의 항복전압과 고주파 특성과의 상관관계를 고찰하였다.