• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.31-40
• /
• 2020

As a result of reenforcement of livestock industry licensing and livestock related vehicle registration system, pig farm are mandatory for setting stop bar before pig farm entrance and maintaining the records of inlet and outlet to and from pig farm. Also, the first step to the pig farm biosecurity is the control of entrance human, vehicles, animals and the related records including entrance and sterilization. In this study, the pig farm entrance control system using RFID technology and web-server system was developed. For human entrance, contact type RFID reading system(13.56MHz) was developed. And the 900MHz RFID system was used to detect vehicle entrance. The test result shows that system actuating, recognition, saving records to the web server was successful. Then, the full system of human entrance recording unit, vehicle entrance recording unit, entrance control system, human sterilizing booth containing a tablet for inputting visitor's record and sterilization record was tested. The records were wrote to web server DB through the data management web-program. Performance test shows the entrance control and data management in server was successfully operated.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.6
• /
• pp.10-15
• /
• 2008

In this paper, a new NMOS gate cross-connected current-mirror type bridge rectifier for UHF RFID applications is presented. The DC converting characteristics of the proposed rectifier are analyzed with the high frequency equivalent circuit and the gate capacitance reduction technique for reducing the gate leakage current due to the increasing of operating frequency is also proposed theoretically by circuitry method. As the results, the proposed rectifier shows nearly same DC output voltages as the existing NMOS gate cross-connected rectifier, but it shows the gate leakage current reduced to less than 1/4 and the power consumption reduced more than 30% at the load resistor, and it shows more stable DC supply voltages for the valiance of load resistance. In addition, the proposed rectifier shows high enough and well-rectified DC voltages for the frequency range of 13.56MHz HF(for ISO 18000-3), 915MHz UHF(for ISO 18000-6), and 2.45 GHz microwave(for ISO 18000-4). Therefore, the proposed rectifier can be used as a general purpose one to drive RFID transponder chips on various RFID systems which use specified frequencies.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.223-228
• /
• 2007

In this paper, Wideband antenna using E-shaped stacked patches has been designed and fabricated for 4th generation mobile communication(IMT-Advanced) AccessPoint application. E-shaped patch was miniature and brodband by made the movement route of current long. And inductive of coaxial probe compensates capacitive by slot. Therefore we fabricated to improve the bandwidth of proposed antenna. The E-shaped single patch antenna has an impedance bandwidth of about 13%(510[MHz]), By adding a second patch at the top of the first patch a bandwidth of 56%(2060[MHz]). The final fabricated antenna could have a good return loss(Return loss ${\leq}-10dB$) and a high gain(over 9.6dBi) at the range of 3.23 ${\sim}$ 5.29 [GHz].

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.972-977
• /
• 2016

This paper introduces development process and results of HF & UHF band(13.56 MHz, 920 MHz) tag antennas using a single-side printing method on a PE film. The size of tag antenna is designed in the area of $80mm{\times}50mm$, little bit smaller than a credit card. The UHF tag antenna, $76mm{\times}44mm$, is located at the outside of the card size tag antenna, and the HF tag antenna, $40 mm{\times}42 mm$, is located at the center of the UHF tag antenna. The UHF and HF tag antennas are designed with consideration of coupling effects. The single-side printing method with a jumper structure without using a via is used to make a loop antenna of HF tag antenna. The reading range of UHF tag antenna is about 6m, and the reading of HF tag antenna is about 5 cm. The designed tag antennas have long enough reading ranges for both bands. The tag is applicable to logistics and authentification.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.93-98
• /
• 2018

This paper introduces the development of HF(NFC) and UHF band(13.56 MHz, 920 MHz) tag antennas, imbedded in a box. In dual band antennas, the HF band tag can be used to inspect the box using NFC, and the UHF band tag can be used for logistics. The dielectric constant of the box material is measured and used for simulation. The Ntag213 chip manufactured by NXP is used in HF loop antennas, since NFC is possible with Ntag213. For the UHF band, the Higgs-3 chip manufactured by Alien is used. The HF tag antenna is located at the center of the UHF tag antenna, and the location of the HF tag antenna is calculated while considering coupling effects. The designed tag can be used by both the bands for the purposes of logistics and authentication.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.1
• /
• pp.21-25
• /
• 2009

By using Si CMOS process, small RFID tag antenna were fabricated on Si substrate and their electrical properties were evaluated. Firstly, tag antenna pattern and the electromagnetic properties were simulated with HFSS. The frequency was 13.56 MHz, the line-width and line-gap were modeled in the range of $50{\sim}200{\mu}m$. S parameters, SRF, and Q value were calculated from geometry. When the line-width and line-gap were $100{\mu}m$ and $100 {\mu}m$, respectively and the loop-turn was 10, the SRF was 80 MHZ and the Q value was ca. 9. When the microstrip antenna pattern of aluminum $2{\mu}m$ was fabricated by using DC sputtering, Vpp of ca. 4.3 V was obtained when the reader and tag were closely contacted.

• The Magazine of the IEIE
• /
• v.38 no.4
• /
• pp.37-43
• /
• 2011

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.05a
• /
• pp.16.2-16.2
• /
• 2008

• Journal of the Korean Vacuum Society
• /
• v.10 no.1
• /
• pp.112-118
• /
• 2001

Magnetic field is commonly used in low temperature processing plasmas to enhance the performance of the plasma reactors. E$\times$B magnetron or surface multipole configuration is the most popular. However, the properties of capacitively coupled rf plasma confined by axial static magnetic field have rarely been studied. With these background, the effect of magnetic field on the characteristics of capacitively coupled 13.56 MHz/40 KHz argon plasma was studied, Ion saturation current, electron temperature and plasma potential were measured by Langmuir probe and emissive probe. At low pressure region (~10 mTorr), ion current increases by a factor of 3-4 due to reduction of diffusion loss of charged particles to the wall. Electron temperature slightly increases with magnetic field for 13.56 MHz discharge. However, for 40 KHz discharge, electron temperature decreased from 1.8 eV to 0.8 eV with magnetic field. It was observed that the magnetic field induces large temporal variation of the plasma potential. Particle in cell simulation was performed to examine the behaviors of the space potential. Experimental and simulation results agreed qualitatively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2239-2244
• /
• 2013

Industrial machines have constraints on movement due to its wire for power supply. Recently, the research on wireless power supply for industrial machine which is required to move freely is receiving a lot of attention. In this paper, we suggest a magnetic induction system which can charge a equipment's battery with wireless at a close range. The system was designed to operate at 13.56 MHz and a distance of 20~30 mm between the transmitting and the receiving power module. From experiment, it was found that it takes about 135 minutes for charging the battery with about 15 V using the proposed system.