• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.236-236
• /
• 2011

본 연구 축전 결합형 고주파 플라즈마(CCP) 식각장비에 펄스 직류(Pulse DC) 전원을 인가하여 오실로스코프(oscilloscope)를 분석하여 전기적 특성을 평가하는 것이다. 펄스 직류전원 플라즈마 시스템에서는 다양한 변수를 이해하여야 한다. 본 실험에서 사용한 공정 변수는 Pulsed DC Voltage 300~500 V, Pulsed DC reverse time $0.5{\sim}2.0{\mu}s$, Pulsed DC Frequency 100~250 kHz 이었다. 실험 결과를 정리하면 1) Pulsed DC Voltage 가 증가할수록 Input voltage의 최대값은 336~520 V, 최소값은 -544~-920 V로 변하여 피크 투 피크 (peak to peak)값은 880~1460 V로 증가였다. Input current 또한 최대값은 1.88~2.88 A, 최소값은 -0.84~-1.28 A로 변하여 피크 투피크 값은 2.88~4.24 A로 증가하였다. 이는 척에 인가되는 전류와 파워의 증가를 의미한다. 2) Pulsed DC reverse time이 증가하면 Input voltage와 Input current값이 증가했다 (Input voltage의 피크 투 피크 값은 1200~1440 V, Input current의 피크 투 피크 값은 3.56~4.56 A). 3) Pulsed DC frequency가 증가하면 주기가 짧아져 Input voltage와 Input current값이 증가 한다 (Input voltage의 피크 투 피크 값은 900~1320 V, Input current의 피크 투 피크 값은 2.36~3.64 A). 결론적으로 펄스 직류 플라즈마의 다양한 전기적 변수들은 반응기 내부에 인가되는 Input voltage와 Input current의 값에 큰 영향을 준다는 것을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 E
• /
• pp.1632-1634
• /
• 1998

In this paper, the study of influence of DC voltage and AC voltage on residual voltage of XLPE Cable was presented. In the former case, when the DC voltage of -10.0[kV] was applied to XLPE Cable for 0, 600, 1200, 1800[sec], time constants were 2139, 1416, 939, 488[sec] and resistivities were 930, 615.65, 408.26, 212.17[${\Omega}{\cdot}m$] respectively. In the latter case, when the AC voltage of 4 and 6[kV] was applied to the same Cable for 600[sec] after applying DC voltage of -5.0[kV] for 600[sec], time constants were 215, 275[sec] and resistivities were 93.48, 119.57[${\Omega}{\cdot}m$] respectively. In this experiments, measurement voltage, charging time and measurement time were -8.0[kV], 30[sec], 600[sec] respectively.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.73-79
• /
• 2004

For the global microwave market, high RF power or deluxe model is applying for inverter gradually. In this paper, 120[V]/1200[W] high power inverter is proposed and verified by an optimized design of PFM type. Especially the steady power output control was fulfilling at ＋/－ 10[％] input voltage variation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 추계학술대회 논문집
• /
• pp.108-111
• /
• 2002

For the global microwave market, high RF power or deluxe model is applying for Inverter gradually. In this study, 120V/1200W high power Inverter was proposed and verified by an optimized design of PFM-type. Especially the steady power output control was fulfilling at +/- $10\%$ input voltage variation.

• 한국결정학회지
• /
• 제11권4호
• /
• pp.212-223
• /
• 2000

A stochiometric mix of CuInTe₂ polycrystal was prepared in a honizonatal furnace. To obtain the single crystal thin films, CuInTe₂ mixed crystal was deposited on throughly etched GaAs(100) by the HWE system. The source and substrate temperatures were 610℃ and 450℃ respectively, and the thickness of the deposited single crystal thin film was 2.4㎛. CuInTe₂ single crystal thin film was proved to be the optimal growth condition when the excition emission spectrum was the strongest at 1085.3 nm(1.1424 eV) of photoluminescence spectrum at 10 K, and also FWHM of Double Crystal X-ray Rocking Curve (DCRC) was the smallest, 129 arcsec. The Hall effect on this sample was measured by the method of Van der Pauw, and the carrier density and mobility dependent on temperature were 9.57x10/sup 22/ electron/㎥, 1.31x10/sup -2/㎡/V·s at 293 K, respectively. The ΔCr(Crystal field splitting) and the ΔSo (spin orbit coupling splitting( measured at f10K from the photocurrent peaks in the short wavelength of the CuInTe₂ single crystal thin film were about 0.1200 eV, 0.2833 eV respectively. From the PL spectra of CuInTe₂ single crystal thin film at 10 K, the free exciton (E/sub x/) was determined to be 1064.5 nm(1.1647 eV) and the donor-bound exciton(D/sup 0/, X) and acceptor-bound exciton (A/sup 0/, X) were determined to be 1085.3 nm(1.1424 eV) and 1096.8 nm(1.1304 eV0 respectively. And also, the donor-acciptor pair (DAP)P/sub 0/, DAP-replica P₁, DAP-replica P₂ and self-activated (SA) were determined to be 1131 nm (1.0962 eV), 1164 nm(1.0651 eV), 1191.1 nm(1.0340 eV) and 1618.1 nm (0.7662 eV), respectively.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1111-1116
• /
• 2005

ZnO varistor ceramics added a glass-frit 0.03 $wt\%$ were fabricated with variation of sintering temperature. The sintering temperature and time were $1125^{\circ}C\~1200^{\circ}C$ and 2 h. The average grain sizes increased and the varistor voltage decreased with increasing the sintering temperature. The values of the specimen sintered at $1200^{\circ}C$ were $23.7\;{\mu}m$ and 329 V, respectively. The leakage current of all specimens was less than $1\;{\mu}A$ at DC $82\%$ of varistor voltage. The clamping voltage ratio of the specimen sintered at $1175^{\circ}C$ was 1.37. The endurance of surge current and the deviation of varistor voltage of the specimen sintered at $1175^{\circ}C$ were 6400 $A/cm^2$ and ${\Delta}-2.81\%$, respectively. After the High Temperature Load Test(HTLT) at $85^{\circ}C$ for 1000 h, the specimen sintered at $1175^{\circ}C$ showed the lowest deviation of varistor voltage of ${\Delta}-1.92\%$.

• 한국군사과학기술학회지
• /
• 제21권2호
• /
• pp.211-216
• /
• 2018

This paper presents a numerical optimization technique and switching phase control technique aiming at improvement of efficiency of the low voltage BLDC motor. The optimization technique is performed using the generalized sensitivity technique, response surface method(RSM) and sampling minimization technique. In order to minimize current consumption of the BLDC motor, the switching method of the driving device is optimized using RSM with finite element analysis. The ratings of BLDC motor are 50 W, 24 V, 1200 rpm. As optimizing results, the input current is reduced from 2.78 to 2.51 [A] when the switching phase is shifted by -2.65 [DEG_ELC] at the rated driving speed of 1200 [rpm]. It is confirmed that the proposed method reduces the consuming current of the low voltage BLDC motor through switching phase control method using the numerical optimization method.

• 한국전기전자재료학회논문지
• /
• 제20권6호
• /
• pp.496-501
• /
• 2007

In order to enhance sintering characteristics on the $ZnO-Pr_6O_{11}$ based multilayer chip varistors (MLVs), a response surface analysis using central composite design method were carried out. As a result, varistor voltage($V_{1mA}$), nonlinear coefficient ($\alpha$), leakage current ($I_L$) and capacitance (C) were considered to be mainly affected by sintered temperature and holding time. MLVs sintered at $1200^{\circ}C$ and above $1200^{\circ}C$ revealed poor electrical characteristics, possibly due to the reaction between electrode materials(Pd) and $ZnO-Pr_6O_{11}$ based ceramics. On the sintering temperature range $1150{\sim}1175^{\circ}C$, nonlinear coefficient ($\alpha$) and leakage current ($I_L$) were shown to be $60{\sim}69$ and below $0.3{\mu}A$, respectively. In particular, MLVs sintered at $1175^{\circ}C$, 1.5 hr and $2^{\circ}C/hr$ (cooling speed) showed stable ESD(Electrical Static Discharge) characteristics under the condition of 10 times at 8 Kv with deviation varistor voltage, and deviation nonlinear coefficient were 0.3% and 0.33% (at positive), 0.55% (at negative), respectively.

• 한국전기전자재료학회논문지
• /
• 제17권8호
• /
• pp.893-897
• /
• 2004

In this paper, we studied the mechanical and thermal properties on slice XLPE sheet from 22 kV and 154 kV power cables. Interface structures are XLPE/semiconductor and XLPE/water/semiconductor. We evaluated mechanical property, thermal analysis, moisture analysis. Based on mechanical and thermal properties of the 22 kV XLPE sheet, elongation, mechanical strength, and melting point were evaluated to be 485.48 %, 1.74 kgf/$\textrm{mm}^2$ and $102.48^{\circ}C$, respectively. It was also evaluated from the mechanical and thermal properties of 154 kV XLPE sheet that elongation, mechanical strength, and melting point are 507.81 %, 1.8 kgf/$\textrm{mm}^2$, $106.9^{\circ}C$, respectively. A region shows a rapid increase in tension strength, and B region only shows increase in elongation under 1.0 kgf/$\textrm{mm}^2$, C region shows increase in both elongation and tension strength. Difference of melting point came from the chain of XLPE polymer and the difference of crystallization. Moisture density of semiconductor showed 800 ∼ 1200 ppm before extrude, 14000 ∼24000 ppm after extrude. These values were higher than the moisture density of XLPE (300∼560) ppm.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.21-27
• /
• 2015

The goal of this study is the size and distribution of the electromagnetic force generated by the current flowing through the second underground line of 154kV power transmission cables by using electromagnetic finite element analysis. So we interpret how mutually electromagnetic force has an effect on the comparable judgement of Trefoil, Duct and Flat, which shows in a numerical arrangement. 154kV OF 1200SQ Cable 1.281km not only is applicable to modeling for underground transmission cable but also examine the effect of line to line, phase to phase and size and direction of the electromagnetic force preparing for the occurrence of normal state and single-phase earth fault, which are arranged in trefoil, duct and flat formation between sections. As showing how the trajectory, and size distribution of the electromagnetic force translate as the arrangement of the cables when a steady-state current and a fault current flows on the underground cables, I hope that when Underground transmission is designed, this data will be useful information.