• Elastomers and Composites
• /
• v.49 no.3
• /
• pp.181-190
• /
• 2014

Melt grafting of itaconic acid (IA) onto an ethylene-propylene-diene terpolymer (EPDM) with various organic peroxide initiators was performed. Finding the optimum mixing conditions and concentration of ingredients is critical for effective grafting and optimum properties of grafted materials. This study focused on the effects of mixing conditions (temperature and time), initiator type/concentration and monomer concentration on the grafting degree and efficiency, melt flow index, and gel content of EPDM-g-IA. The initiator, 2,5-dimethyl-2,5-di(tert-butyl peroxy)-hexane (T-101), appeared to meet for the best grafting degree (1.91%). The grafting degree increased markedly by increasing the amounts of monomer IA and initiator T-101. The grafting degree also increased by increasing mixing temperature and time. The optimum monomer and initiator concentrations and reaction temperature and time were found to be about 5wt%/0.05wt% and $160^{\circ}C$/15min, respectively. It was found that the physical properties of EPDM-g-IA were higher than those of the pristine EPDM.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.395-399
• /
• 2011

Material of the gasket for lithium ion battery requires the chemical resistance, the electrical insulting property, the compression set, the anti-contamination level and the low temperature resistance. We compounded ethylene propylene diene monomer (EPDM), which showed widely different solubility parameter index, with adjusting the amount of metal oxide as an activator. We did long-term test and compression set against an electrolyte with consideration for operating conditions in lithium-ion battery. In these tests, we checked the physical, chemical characteristics and the effect to lithium ion battery with different kinds of activators. In case of rubber with ZnO as an activator, through 1000 h depositing test in propylene carbonate which is one of representative solvents, we could get the satisfying characteristics and result. However, $Zn^{2+}$ had eluted in the ion elution test. So, ZnO should be limited in EPDM compound for the gasket material in lithium-ion battery.

• The Korean Journal of Mycology
• /
• v.29 no.1
• /
• pp.67-71
• /
• 2001

A steroid compound, F-l with antioxidative activity from the fruit bodies of Fomitella fraxinea was isolated by ethyl acetate extraction, silica gel column chromatography, and preparative silica thin layer chromatography. The structure of the compound was determined to be crgosta-7,22-diene-3-one-$16{\beta}-ol$ by IR, NMR, and GC-Mass. The compound exhibited inhibition on lipid peroxidation of rat liver microsomes, with $IC_{50}$ value of $3.8{\mu}g/ml$.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.97-102
• /
• 2002

The mixtures of non-conjugated dienes, 4-methyl-1,4-hexadiene and 5-methyl-1,4-hexadiene (MHD), were successfully synthesized by the reaction of isoprene with ethylene using Fe(III)-based catalyst in toluene. The conversion was over 96 mol% on the basis of the initial amount of isoprene used. The production yield for MHD was nearly 50 mol%, the other was polyisoprene. The mixtures were successfully copolymerized with ethylene by using zirconium-based metallocenes. The products were characterized by the combinations of gas chromatography, high temperature gel permeation chromatography, $^1$H NMR, $^{13}$ C NMR, high temperature $^1$H NMR, UV/visible spectroscopy, and differential scanning calorimetry. It was found that 5-methyl-1,4-hexadiene was active enough to be incorporated into the copolymer chain but the corresponding isomeric material,4-methyl-1,4-hexadiene, was inactive in metallocene-catalyzed copolymerizations. Specifically, in the zirconocene-catalyzed copolymerizations of ethylene with MHD, ansa-structure catalysts seem to be more efficient than non-bridged type zirconocene. The degree of incorporation of MHD in the resulting copolymers was able to be controlled by the amount of non-conjugated dienes used initially.

• Elastomers and Composites
• /
• v.52 no.1
• /
• pp.35-47
• /
• 2017

A comprehensive survey of the available literature showed that in the last few decades, there has been a growing interest in the use of thermoplastic vulcanizates (TPVs). TPVs are the second largest group of soft thermoplastic elastomers (TPEs) after styrene-based block copolymers, and offer a wide range of potential and proven applications, including in mechanical rubber goods, under-the-hood applications in the automotive field, industrial hose applications, electrical applications, consumer goods, and soft touch applications. Over the last two decades, TPVs have shown a strong and steady market growth (~12% per year). Commercialized TPVs are commonly based on blends of ethylene propylene diene monomer (EPDM) rubber and polypropylene (PP), and to a lesser extent on combinations of butyl or nitrile rubber with PP. EPDM/PP TPVs are characterized by finely dispersed crosslinked EPDM rubber particles (particles size varying between 0.5 and $2.0{\mu}m$) distributed in a continuous thermoplastic PP matrix. If the rubber particles of such a blend are small enough and if they are vulcanized well enough, then the properties of the blend are generally improved. This review article introduces various topics and aspects relevant to EPDM/PP TPVs. The development of TPVs, the use of various types of crosslinking systems and co-agents as crosslinking agents for PP/EPDM blends, the morphology and rheology of TPVs, and their typical end-use applications are also reviewed.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.4
• /
• pp.488-494
• /
• 2011

Gasket plays an important role on sealing of the polymer electrolyte membrane fuel cell (PEMFC) stack. Stack requires gaskets in each cell to keep the hydrogen and air/oxygen within their respective regions. The failure of the gasket creates the problems of fuel leakage, mixing, damage on parts and can be a direct reason for the degrading the efficiency of fuel cell. The purpose of this paper researches on how mechanical properties of EPDM gasket in PEMFC are changed after long-term operations. The EPDM (ethylenepropylene-diene monomer) gaskets are obtained from the stack after long-term operations. DMA (dynamic mechanical analysis) is conducted to access the change of mechanical properties of the EPDM gasket. SEM/EDS (scanning electron microscope/energy dispersive spectroscopy) was used to show the surface topography and chemical characterization on the sample surface.

• Journal of Nutrition and Health
• /
• v.35 no.6
• /
• pp.643-649
• /
• 2002

This study was done to investigate effects of ${\gamma}$-irradiated pork feeding on the formation of glutathione S-transferase placental form positive (GST-P$^{+}$) foci, lipid peroxidation, cytochrome P450 system and microsomal glucose 6-phosphatase activity in diethylnitrosamine (DEN)-initiated rat hepatocarcinogenesis. Weaning Sprague-Dawley male rats were fed the diet containing ${\gamma}$-irradiated ground pork at the dose of 0, 3, 10, 30 kGy as a 20％ of protein source for 8 weeks. One week after feeding, rats were intraperitoneally injected twice with a dose of DEN (50 mg/kg BW). As a promote.,0.05％phenobarbital was fed in drinking water from one week after DEN treatment until the end of experiment. At the end of 8th week, rats were sacrificed and hepatic GST-P$^{+}$ foci, microsomal malondialdehyde (MDA) and conjugated diene contents were determined. In addition, cytochrome P450 content and the activities of NADPH cytochrome P450 reductase and glucose 6-phosphatase were also measured. There was no significant effect by gamma irradiation on microsomal MDA content, conjugated diene, cytochrome P450 content and activities of NADPH cytochrome P450 reductase and glucose 6-phosphatase. However with DEN treatment, microsomal MDA content showed a increasing tendency. Cytochrome P450 content was also significantly increased while microsomal glucose 6-phophatase activity was significantly decreased with DEN treatment. However the activity of NADPH cytochrome P450 reductase was not affected. An interesting finding in this study was that the number and area of hepatic GST-P$^{+}$ foci of rats fed gamma irradiated pork were tended to be decreased by high dose of irradiation, but were not significantly different. These results might imply that the consumption of low dose of gamma irradiated pork does not affect the formation of hepatic GST-P$^{+}$ foci and lipid peroxide and membrane stability.ability.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3304-3308
• /
• 2010

Condensation of 4-amino-5-mercapto-3-($\alpha$-naphthyl)-s-triazole (1) with cyanogen bromide gives 6-amino-3-($\alpha$-naphthyl)-s-triazolo[3,4-b]-1,3,4-thiadiazole (2) which on condensation with chloranil yields 3,9-di-($\alpha$-naphthyl)-6,14-dioxo-bis-(s-triazolo[3,4-b]-1,3,4-thiadiazolo[3,2-b]imidazo[4,5-b]cyclohexane]-5a,6a-diene) (3). 3-($\alpha$-naphthyl)-s-triazolo[3,4-b]-1,3,4-thiadiazolo[3,2-b]imidazo[4,5-b]quinoxaline (4) is obtained by a similar condensation of (2) with 2,3-dichloroquinoxaline. The reaction of (2) with $\alpha$-haloketones followed by bromination affords 7-aryl-3-($\alpha$-naphthyl)-imidazo[2,1-b]-1,3,4-thiadiazolo[2,3-c]-s-triazoles (5) and their 6-bromo analogues 6 respectively. The structures of all newly synthesized compounds were established on the basis of elemental analyses, IR, $^1H$-NMR. The antibacterial and antifungal activities of all newly synthesized compounds have also been evaluated.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.5
• /
• pp.193-198
• /
• 2015

In the study, electroless Ni-plating on flexible ethylene-propylene-diene-monomer (EPDM) rubber sheets for the application of an insert block for shielding electromagnetic interference of multi cable transit (MCT) systems was investigated. Ni crystallinity and adhesion have been found to vary with processing parameters such as pH and temperature of the plating bath. It was shown that Ni-films having the high crystallinity and optimum electric conductivity were obtained on EPDM rubber sheets under pH 7 and 8 at $60{\sim}70^{\circ}C$. The conductive Ni-plated EPDM rubber prepared at pH 7 at $70^{\circ}C$ showed the enhanced adhesion and electric conductivity, and the high electromagnetic interference shielding effect in the 400 MHz~1 GHz range.

• Journal of Life Science
• /
• v.22 no.12
• /
• pp.1712-1717
• /
• 2012

Oxidation of low density lipoprotein (LDL) plays an important role in the development and progression of atherosclerotic disease. In this study, human LDL was isolated and oxidized using $CuSO_4$ in the presence or absence of S-allylmercaptocysteine. Oxidative modification of the LDL fraction was monitored by both the appearance of thiobarbituric acid substances (TBARS), an increase in electrophoretic mobility, and conjugated diene formation. The addition of S-allylmercaptocysteine reduced lipid peroxide formation, indicating it to be an effective antioxidant. The inhibition of LDL oxidation by $5{\sim}20{\mu}g/ml$ S-allylmercaptocysteine occurred in a dose-dependent manner, as assessed by the TBARS assay. S-allylmercaptocysteine at $20{\mu}g/ml$ almost completely inhibited the $Cu^{2+}$ induced increases in electrophoretic mobility of LDL and almost completely inhibited conjugated diene formation. A more potent antioxidative activity was observed for S-allylmercaptocysteine than for either Vitamin C or $d{\ell}-{\alpha}$-tocopherol. Thus, S-allylmercaptocysteine aid in preventing the development and progression of atherosclerotic disease.