• Journal of the Korean Chemical Society
• /
• v.41 no.12
• /
• pp.653-660
• /
• 1997

Silicone rubber-matrix membranes doped with tetradecyltrimethylammonium chloride (TDTMACl) are used to enhance electrode performance for chloride measurements in physiological samples. The optimized membrane formulation incorporates 95.4 wt% silicone rubber and 4.6 wt% TDTMACl, and its pH response is negligible in the range of pH 6-10. The TDTMACl-doped silicone rubber membrane exhibits sub-Nernstian response to chloride from 10 to 300 mM (-37.5 mV/decade), but its selectivities for chloride over other anions are remarkably enhanced: KpotCl,NO3=1.3, KpotCl,I=2.0, KpotCl,Sal=0.8, KpotCl,SCN=2.0 and KpotCl,ClO4=0.8. Furthermore, since the silicone rubber-matrix membrane exhibits better adhesion to the solid surface than do PVC membranes, the lifetime of the coated-wire type membrane electrode is greatly improved. The response properties toward chloride and salicylate for solid-state sensor are not significantly changed after at least 35 days of use.

• Mycobiology
• /
• v.41 no.3
• /
• pp.145-148
• /
• 2013

Vegetative growth signaling of the opportunistic human pathogenic fungus Aspergillus fumigatus is mediated by GpaA ($G{\alpha}$). FlbA is a regulator of G protein signaling, which attenuates GpaA-mediated growth signaling in this fungus. The flbA deletion (${\Delta}flbA$) and the constitutively active GpaA ($GpaA^{Q204L}$) mutants exhibit enhanced proliferation, precocious autolysis, and reduced asexual sporulation. In this study, we demonstrate that both mutants also show enhanced tolerance against $H_2O_2$ and their radial growth was approximately 1.6 fold higher than that of wild type (WT) in medium with 10 mM $H_2O_2$. We performed quantitative PCR (qRT-PCR) for examination of mRNA levels of three catalase encoding genes (catA, cat1, and cat2) in WT and the two mutants. According to the results, while levels of spore-specific catA mRNA were comparable among the three strains, cat1 and cat2 mRNA levels were significantly higher in the two mutants than in WT. In particular, the ${\Delta}flbA$ mutant showed significantly enhanced and prolonged expression of cat1 and precocious expression of cat2. In accordance with this result, activity of the Cat1 protein in the ${\Delta}flbA$ mutant was higher than that of $gpaA^{Q204L}$ and WT strains. For activity of the Cat2 protein, both mutants began to show enhanced activity at 48 and 72 hr of growth compared to WT. These results lead to the conclusion that GpaA activates expression and activity of cat1 and cat2, whereas FlbA plays an antagonistic role in control of catalases, leading to balanced responses to neutralizing the toxicity of reactive oxygen species.

• ALGAE
• /
• v.23 no.4
• /
• pp.311-316
• /
• 2008

The seasonal variation of marine algal biomass and community were studied with nondestructive sampling and quadrat method during May 2006 to April 2008 in the intertidal and subtidal zone at Yokjido. As result, total 120 species, 13 Chlorophyta, 34 Phaeophyta, 71 Rhodophyta and 2 Spermatophyta were identified in this study. The major species which contributed significantly to the total biomass were Ulva pertusa, Undaria pinnatifida, Ecklonia stolonifera, Sargassum horneri, S. serratifolium, Gelidium amansii and Prionitis cornea. The mean biomass was 235.5 g wet wt m$^{-2}$ in intertidal, 1,038.9 g wet wt m$^{-2}$ in 1 m, 1,013.1 g wet wt m$^{-2}$ in 5 m, and 19.7 g wet wt m$^{-2}$ in 10 m depths of mean sea level. Seasonal biomass change in intertidal zone, the peak season was in spring, while the lowest was in autumn. The vertical distribution of marine vegetation was characterized by Ulva pertusa - Gelidium divaricatum - Gloiopeltis furcata - Sargassum thunbergii - Hizikia fusiformis at intertidal zone, and Caulerpa okamurae - Gelidium amansii - Chondrus ocellatus - Ecklonia stolonifera - Sargassum horneri - Gracilaria textorii at subtidal zone. These result indicates that the marine algal species and biomass of 1 m and 5 m depths in subtidal zone are greater than intertidal zone, and Ecklonia stolonifera and Sargassum spp. are the dominant species of Yokjido.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2801-2808
• /
• 2022

The synergistic effect of ZrC nanoparticle pining and Re solution in W matrix on the thermal stability of tungsten was studied by investigating the evolution of the microstructure, hardness and tensile properties after annealing in a temperature range of 1000-1700 ℃. The results of metallography, electron backscatter diffraction pattern and Vickers micro-hardness indicate that the rolled W-1wt%Re-0.5 wt% ZrC alloy has a higher recrystallization temperature (1600 ℃-1700 ℃) than that of the rolled pure W (1200 ℃), W-0.5 wt%ZrC (1300 ℃), W-0.5 wt%HfC (1400-1500 ℃) and W-K-3wt%Re alloy fabricated by the same technology. The molecular dynamics simulation results indicated that solution Re atoms in W matrix can slow down the self-diffusion of W atoms and form dragging effect to delay the growth of W grain, moreover, the diffusion coefficient decrease with increasing Re content. In addition, the ZrC nanoparticles can pin the grain boundaries and dislocations effectively, preventing the recrystallization. Therefore, synergistic effect of solid solution Re element and dispersed ZrC nanoparticles significantly increase recrystallization temperature.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.3
• /
• pp.191-201
• /
• 2014

Marine algal flora and community structure were investigated seasonally at three sites in subtidal zone of Wangdol-cho on the east coast of Korea from May 2012 to August 2013. A total of 122 species were collected and identified, including 12 green algae, 29 brown algae, and 81 red algae. Of these, 38 species were found throughout the survey period. Average seaweed biomass was 472.19-1,198.77 g wet wt. $m^{-2}$ in spring, 68.99-631.14 g wet wt. $m^{-2}$ in summer, 200.91-401.20 g wet wt. $m^{-2}$ in autumn, and 53.61-922.32 g wet wt. $m^{-2}$ in winter. The vertical distribution based on biomass were Grateloupia lanceolata, Acrosorium venulosum, Lomentaria catenata - Undaria pinnatifida, Dictyopteris pacifica, Sargassum horneri, Ecklonia cava - Desmarestia viridis, E. cava, S. horneri from upper to lower subtidal zone. The flora was classified into six functional groups: filamentous form (34.43%), coarsely branched form (25.41%), sheet form (24.59%), thick leather form (9.71%), crustose form (5.74%) and jointed calcareous form (0.82%). The C/P, R/P and (R+C)/P values reflecting the flora characteristics were 0.41, 2.79 and 3.21, respectively. Also, diversity index (H') and dominance index (DI) indicate that the algal community and environmental condition of Wangdol-cho is stable. We recommend that Wangdol-cho subtidal zone should be more protected from human activities such as turbulence and eutrophication in order to maintain species diversity and abundance of algae.

• Economic and Environmental Geology
• /
• v.44 no.4
• /
• pp.313-320
• /
• 2011

The Taebaegsan Mineralized District is the most prospective region for the useful mineral commodities such as a coal, non-metallic, metallic mineral in South Korea. From a general point of view, Cambro- Ordovician limestone formations, Myobong slate and Pungchon (Daegi) limestone, are the most fertilizable formations in the Taebaegsan Mineralized District. The geology around Weondong mine area consists mainly of Carboniferous-Triassic formations and Cambro-Ordovician formations intruded by rhyolite/quartz porphyry. The great overthrusted fault of N40~$50^{\circ}E$ direction, so called Weondong overthrust fault, is observed in the central part of the mine area and the NS fault system cuts the overthrusted fault. By postulating from the favorable geological and structural condition around Weondong area, the possibility of deep seated hidden ore bodies is expected. In 2010, on the basis of the results of LOTEM and CSAMT survey, the cross-hole survey was performed for the investigation of the hidden polymetallic ore body in the deep parts of the Weondong mine area and the grade of the newly-discovered orebody is as follows; (1) The cut-off grade for lead-zinc 3%; an weighted average grade 5.50% (2.7 m), (2) The cutoff grade for copper 0.1%; an weighted average grade 0.91% (14.65 m), (3) The cut-off grade for iron 30%; an weighted average grade 38.18% (3.3 m), (4) $WO_3$ for each cut-off grade(0.01%, 0.05%, 0.1%); an weighted average grade 0.29 wt. % (8.8 m), 1.15 wt. % (2.1 m), 1.97 wt. % (1.2 m), (5) $MoS_2$ for each cut-off grade(0.01%, 0.1%); an weighted average grade 0.15 wt. % (6.3S m), 0.28 wt. % (3.15 m), (6) $Ta_2O_5$ for each cut-off grade (0.01%, 0.1%); an weighted average grade 0.13% (19.S m), 1.11% (1.8 m), (7) $Nb_2O_5$ for each cut-offgrade (0.01%, 0.1%); an weighted average grade 0.06% 11.5 m), 0.15% (3.0 m).

• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.455-462
• /
• 1996

Automobile Fuel Shortage Detecting Sensor, in this paper, was fabricated by using heat dissipation coefficient difference between gasoline and air condition the NTC thermistor of Mn-Ni Co system with the composition ratio of Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt%. The condition of sensor operation is that, for turn-on characteristics, the time of arriving at 135mA must be less than 180 second when the DC voltage of 11V is applied in the air condition of -10.deg. C and that, for turn-off characteristics, the saturation current must be less than 60mA when the DC voltage of 15V is applied in the gasoline condition of 60.deg. C. It is known, from the experimental results, that the resistance range and B-constant for the Automobile Fuel Shortage Detecting Sensor with dimension of 5*3*0.9mm were 850-1150.ohm. and 1150-1250.deg. C, respectively and the resistance range and B-constant were agree with that of sensor operation condition. When Bi$_{2}$O$_{3}$ of 0-0.5wt% was added to Mn$_{3}$O$_{4}$ : 9wt%, NiO : 28wt%, and CO$_{3}$O$_{4}$ : 61wt% composition, the resistivity and B-value were 380-430(.ohm.-cm) and 1930 - 2030, respectively. Particularly, for Bi$_{3}$O$_{3}$ of 0.25-0.5wt%, the sintering density of over 90% and the operation characteristics necessary to Automobile Fuel Shortage Detecting Sensor were obtained. The difference of heat dissipation coefficient gasoline and air condition was 15 times.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.42-51
• /
• 2021

Dissociation into Lithium-polysulfide electrolyte due to repeated cycles during the Lithium/Sulfur battery reaction is a major problem of reduced battery lifespan. We searched for a porous carbon with a large specific surface area that infiltrated S to prevent liquid Lithium-polysulfide from being dissolved in electrolyte, induce adsorption of Lithium-polysulfide, and further increase conductivity. In order to obtain porous carbon spheres with a large specific surface area, the carbon spheres of 1939 m²/g were raised to 2200 m²/g through additional KOH treatment. In addition, through heat treatment with S, a carbon sulfur compound containing 75 wt% of S was fabricate and material analysis was conducted on the possibility of using the cathode material. The electrochemical characteristics of the Reference (622; sulfur: 60%, conductive material: 20%, binder: 20%) pouch cell and the pouch cell made using 75wt% of carbon sulfur compound were analyzed. 75wt% of carbon sulfur pouch cell showed a 20% increase in lifespan and 10% improvement in C-rate compared to the Reference pouch cell after 50 cycles.

• Economic and Environmental Geology
• /
• v.56 no.1
• /
• pp.1-11
• /
• 2023

In this study, we explore the morphological and geochemical characteristics for 440 manganese nodules collected from two different water depths [ARA12B-St52 (150 m, n = 239) and ARA12B-St58i (73 m, n = 201)] on the continental shelf of the East Siberian Sea from the ARA12B expedition in 2021. We also discussed the variations in the characteristics of manganese nodules with varying water depths in the Arctic Sea. The sizes of the nodules are generally greater than 3 cm at both sites. However, there is an obvious difference in the morphology with water depths. For the nodules collected at 150 m, brown-black colored tabular, tube, and ellipsoidal shapes with a rough surface texture are dominant. On the other hand, yellow-brown tabular shapes with a smooth surface texture are common for the nodules collected at 73 m. Furthermore, the slope of trend line between size and weight is significantly different at both sites: particularly, the slopes of nodules at 150 and 73 m are 1.60 and 0.84, respectively. This indicates the difference in the internal structure, porosity, and constituting elements between both nodules. Micro X-ray Flourescence (µ-XRF) results clearly demonstrate that the internal textures and chemical compositions are different with water depths. The nodules at 150 m are composed of a thick Mn-layer and a thin Fe-layer centered on the nucleus, while the nodules at 73 m are alternately grown with thin Mn- and Fe- layers around the nucleus. The average chemical compositions obtained by µ-XRF are 40.6 wt% Mn, 5.2 wt% Fe, and 7.9 Mn/Fe ratio at 150 m, and 10.3 wt% Mn, 19.0 wt% Fe, and 0.6 Mn/Fe ratio at 73 m. The chemical compositions of the nodules at 150 m are similar to those of nodules from the Peru Basin in the Pacific Ocean, while the compositions of the nodules at 73 m are similar to those of nodules from the Cook Islands or the Baltic Sea. The observed morphological and geochemical characteristics of the nodules show a clear difference at the two sites, which indicates that the aqueous conditions and formation processes of the nodules in the Arctic Sea vary with the water depths.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.4
• /
• pp.184-189
• /
• 2002

The electrical and optical properties of $(Pb_{0.91}La_{0.09})(Zr_{0.65}Ti_{0.35})O_3$(PLZT) thin films by MOCVD using ultrasonic spraying were investigated. To compensate the Pb loss by evaporation, 5 and 10 wt% of excess Pb was added to 0.2 M precursor. After deposition of films on ITO-coated glasses in oxygen atmosphere for 30 min, films were heated by in-situ RTA (rapid thermal annealing) method. When the films were heat treated at $600^{\circ}C$, perovskite single phase was obtained. The optical property of the film with 10 wt% excess Pb was excellent showing about 84 % of transmittance near 520 nm. The dielectric constant of the film was about 308 and the leakage current of the film was lower than the Pb excess 0, 5 wt% PLZT thin films.