• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.535-540
• /
• 2004

In this paper, We proposed a rectangular slot antenna with CPW feeder. Slot antennas fed by CPW are attractive due to the simple fabrication simplicity and ease of integration with active devices. This antenna consists of two parts, inner patch and outer patch to realize wide-band antenna by multi-frequency. Also, We fabricated a proposed rectangular slot antenna, confirm characteristics of multi-frequency by tuning antenna parameters, inner antenna's location and size. The experimental results show that each resonant frequency of a fabricated antenna is measured at almost 1, 9GHz, 2.8GHz, 3, 5GHz, 4, 9GHz. In radiation patterns each resonant frequency, radiation pattern 4-th resonant frequency is the same ad that of TM11 in patch antenna. Therefore, the experimental and theoretical results shows that a proposal rectangular slot antenna have triple resonant frequencies.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.3
• /
• pp.1-6
• /
• 2008

A dual band I/Q modulator which converts baseband input signals to 2.4GHz or 5GHz RF output has been proposed. The dual band I/Q modulator for 2.4GHz and 5GHz wireless LAN applications consists of $90^{\circ}$ phase shifter and wideband mixer. The I/Q modulator showed 15dB conversion loss at 2.4GHz and 16dB conversion loss at 5GHz. The sideband suppression is about 15dBc at 2.4GHz and 16dBc at 5GHz. Measured data shows 8.5% EVM at 2.4GHz, and 10% EVM at 5GHz for QPSK with symbol rate of 11Mbps. A carrier rejection is about 40dBc at 2.4GHz/5GHz band, and the I/Q modulator satisfied the output wireless LAN spectrum mask with baseband input signal.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1427-1434
• /
• 2013

In this paper, triple band mobile chip antenna for DCS(1.71~1.88GHz) / PCS(1.75~1.87GHz) / UPCS(1.85~1.99GHz) on PCB Layout is designed. To analyze the characteristics of the designed antenna, we designed and measured Single, Dual, Triple Band antenna. The designed antenna was fabricated and measured using vector network analyzer in LTK(Laird Technologies Korea). Triple and wide band characteristic could be realized the measured bandwidth(V.S.W.R<2.0) of designed antenna operated in the band of 1.71GHz~1.99GHz. This antenna has a small size of about $19mm{\times}4mm{\times}1.6mm$, narrow bandwidth which is a defect of chip antenna is improved. And its experimental results were a good agreement with simulation performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.628-635
• /
• 1999

At center frequency of 11.85 GHz, wideband left-handed circularly polarized microstrip array antenna is designed with the method of sequential ratation based on $2\times2$ radiation elements($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$ phase delay). Its return loss, axial ratio bandwidth, radration pattern, and gain are compared with those adopting sequential rotation based on $1\times2$ radiation elements($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$phase delay). The $8\times8$ array is manufactured and measured. The results show that 10 dB return loss bandwidth is 10.51~12.74GHz(18.82%) which is 1.57 times wider than the case using $1\times2$ sequential rotation method, 3 dB axial ratio bandwidth is 11.43~12.5 GHz(9.03%) which is 1.25 times as wide as that using $1\times2$ sequential rotation method and the antennal gain is 25.4 dB. The results of mesurements are almost similar to those of simulation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.827-833
• /
• 2002

In this paper, a microstrip array antenna for LMDS(Local Multipoint Distribution Service) receiver with corporate feeding network using Chebyshev polynomials is proposed to get the high gain and low side lobe level. The Chebyshev array method is proposed to design the corporate feeding network. LMDS uses 24~27 GHz microwave frequency band to send and receive broadband signals. Measured antenna shows 23.4 dBi gain, 24.96 GHz center frequency, -29.15 dB return loss and 1.2 GHz bandwidth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1240-1247
• /
• 2019

In this paper, we designed a four-band antenna that can be applied to WLAN and WiMAX systems by designing a microstrip feeding structure, four branch lines and a slit on the ground plane. The proposed antenna is designed with a size of 16.0 mm (W1) × 48.0 mm (L8) on a dielectric substrate of 18.0 mm (W) × 50.0 mm (L) × 1.0 mm(h). and a slit of 2.9 mm (W7) × 4.0 mm (L7) is inserted into the ground plane of 18.0 mm (W) × 18.7 mm (L6). Based on -10 dB production and measurement results, it obtained 60.8 MHz (8,730~9,338 MHz), 310 MHz (2.33~2.64 GHz) in the 2.4 GHz band, 420MHz (3.39~3.81 GHz) in the 3.4 GHz band, and 2,070 MHz (4.62~6.69 GHz) in the 5.0 GHz. In addition, the gain and radiation pattern characteristics of the quadrant band are measured from the measurement results anechoic chamber.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.148-150
• /
• 2002

In this paper, a 5-coupled BPF with teflon substrate is presented. In general, for less than 1 GHz frequency, the narrow bandwidth as well as the good characteristic in the rejection frequency band could be realized using lumped elements. However, for higher than 1 GHz frequency, the distributed elements such as microstrip lines need to be used for the design of the desired BPF For less than 2 GHz, the FR4 shows good filter characteristic at low cost. However, in the range of 2 GHz ~ 10 GHz, the filters with FR4 show a big difference between simulation and measurement results. Thus, in such a high frequency region, the teflon is more preferred to the FR4. The center frequency (fc) of the proposed filter is 2.3 GHz, the insertin loss (IL) is 1.2 dB, the return loss (RL) is 30 dB, bandwidth (BW) is 100 MHz, and the size is 8.3 cm $\times$ 4.9 cm.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.530-535
• /
• 2021

In this paper, the design method for a chipless RFID tag using ELC resonators is proposed. A four-bit chipless RFID tag is designed in a two by two array configuration using three ELC resonators with different resonant peak frequencies and one compact IDC resonator. The resonant peak frequency of the bistatic RCS for the IDC resonator is 3.125 GHz, whereas those of the three ELC resonators are adjusted to be at 4.225 GHz, 4.825 GHz, and 5.240 GHz, respectively, by using the gap between the capacitor-shaped strips in the ELC resonator. The spacing between the resonators is 1 mm. Proposed four-bit tag is fabricated on an RF-301 substrate with dimensions of 50 mm×20 mm and a thickness of 0.8 mm. It is observed from experiment results that the resonant peak frequencies of the fabricated four-bit chipless RFID tag are 3.290 GHz, 4.295 GHz, 4.835 GHz, and 5.230 GHz, respectively, which is similar to the simulation results with errors in the range between -2.3% and 0.2%.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1638-1639
• /
• 2011

본 논문에서는 초소형 무선 USB 동글 장치를 위한 광대역 접힌(folded) 모노폴 안테나를 제안하였다. 제안된 안테나는 CPW 급전으로부터 삼지창 형상의 선로를 적용하여 광대역 특성을 구현하였다. 최종 설계된 안테나의 크기는 $16{\times}44.8{\times}3.5\;mm^3$이며, low-profile의 무선 USB 동글용 안테나에 적합하다. 제안된 안테나는 $S_{11}$ < -10 dB 기준으로 2.28~10.8 GHz의 공진 주파수 대역을 가지므로 WiBro (2.3~2.4 GHz), Bluetooth (2.4~2.484 GHz), WiMAX (2.5~2.7 GHz, 3.4~3.6 GHz), satellite DMB (2.605~2.655 GHz), 802.11b/g/a WLAN (2.4~2.485 GHz, 5.15~5.825 GHz), UWB(3.1~10.6 GHz)의 무선 대역을 지원 할 수 있다. 측정된 평균 이득의 범위는 -3.41 dBi 에서 -0.84 dBi 이다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.171-176
• /
• 2005

This study designed and fabricated a multi-purpose planar antenna for base stations that are accessible to DCS, WiBro, and ISM. The proposed antenna was designed into an open loop form from the existing monopole structure. The capacitance of the multi-purpose antenna was increased by the coupling of open parts. This makes the use of MMIC and LTCC convenient and the antenna is smaller and has a larger gain than existing antennas. The resonance distance and bandwidth can be adjusted by changing the open gap and the height of the loop of the antenna. The bandwidth of the designed antenna satisfies DCS, IMT-2000, WiBro, Bluetooth, wireless LAN and ISM bands based on VSWR 2. The entire frequency bandwidth is $58.75\%$ of $1.575GHz\~2.985GHz(1.41GHz)$. Also, the radiation pattern of the antenna displayed co-polarization and cross-polarization characteristics at 1.6GHz, 2.3GHz and 2.8GHz.