• 한국공간구조학회논문집
• /
• 제19권1호
• /
• pp.75-82
• /
• 2019

In the precedent study, the retractable-roof spatial structure was selected as the analytical model and a tuned mass damper (TMD) was installed to control the dynamic response for the earthquake loads. Also, it is analyzed that the installation location of TMD in the analytical model and the optimal number of installations. A single TMD mass installed in the analytical model was set up 1% of the mass of the whole structure, and the optimum installation location was derived according to the number of change. As a result, it was verified that most effective to install eight TMDs regardless of opening or closing. Thus, in this study, eight TMDs were installed in the retractable-roof spatial structure and the optimum mass ratio was inquired while reducing a single TMD. In addition, the optimum mass distribution ratio was identified by redistributing the TMD masses differently depending on the installation position, using the mass ratio of vibration control being the most effective for seismic load. From the analysis results, as it is possible to confirm the optimum mass distribution ratio according to the optimum mass ratio and installation location of the TMD in the the retractable-roof spatial structure, it can be used as a reference in the TMD design for large space structure.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.11-20
• /
• 2017

For structural damage detection of shear buildings, this paper proposes a new concept using structural element mass-stiffness vector (SEMV) based on special mass and stiffness distribution characteristics. A corresponding damage identification method is developed combining the SEMV with the cross-model cross-mode (CMCM) model updating algorithm. For a shear building, a model is assumed at the beginning based on the building's distribution characteristics. The model is updated into two models corresponding to the healthy and damaged conditions, respectively, using the CMCM method according to the modal parameters of actual structure identified from the measured acceleration signals. Subsequently, the structural SEMV for each condition can be calculated from the updated model using the corresponding stiffness and mass correction factors, and then is utilized to form a new feature vector in which each element is calculated by dividing one element of SEMV in health condition by the corresponding element of SEMV in damage condition. Thus this vector can be viewed as a damage detection feature for its ability to identify the mass or stiffness variation between the healthy and damaged conditions. Finally, a numerical simulation and the laboratory experimental data from a test-bed structure at the Los Alamos National Laboratory were analyzed to verify the effectiveness and reliability of the proposed method. Both simulated and experimental results show that the proposed approach is able to detect the presence of structural mass and stiffness variation and to quantify the level of such changes.

• 근관절건강학회지
• /
• 제5권1호
• /
• pp.83-109
• /
• 1998

This study was carried out to identify the Important modifiable risk factors for reduced bone mass and to construct prediction model which can classify women with either low or high bone mass. Through the literature review, individual characteristics such as age, body weight, height, education level, family history, age of menarche, postmenopausal period, gravity, parity, menopausal status, and breast feeding period were identified and factors of life style such as past milk consumption, past physical activity, present daily activity, present calcium intake, alcohol intake, cigarette smoking, coffee consumption were identified as influencing factors of reduced bone mass in women. Four hundred and eighty women aged between 28 and 76 who had given measurement bone mineral density by dual energy x-ray absortiometry in lumbar vertebrae and femur from July to October, 1997 at 4 general hospitals in Seoul and Pusan were selected for this study. Women were excluded if they had a history of any chronic illness such as rheumatoid arthritis, diabetes mellitus, hyperthroidism, & gastrointestinal disorder and any medication such as calcium supplements, calcitonin, estrogen, thyroxine, antacids, & corticosteroids known affect bone. As a result of these exclusion criteria, four hundred and seventeen women were used for analysis. Multiple logistic regression model was developed for estimating the likelihood of the presence or absence of reduced bone mass. A SAS procedure was used to estimate risk factor coefficient. The results are as follows For lumbar spine, the variables significant were age, body weight, menopause status, daily activity, past milk consumption, and past physical activity(p<0.01), while for femoral Ward's triangle, age, body weight, level of education, past milk consumption, past physical activity(p<0.001). Past physical activity, present daily activity and past milk consumption are the most powerful modifiable predictors in vertebrae and femur among the predictors. When the model performance was evaluated by comparing the observed outcome with predicted outcome, the model correctly identified 74.1% of persons with reduced bone mass and 84.5% of persons with normal bone mass in the lumbar vertebrae and 82.9% of persons with reduced bone mass and 75.0% of persons with normal bone mass in the femoral Ward's triangle. On the basis of these results, a number of recommendations for the management of reduced bone mass may be made : First, those woman who are classified as high risk group of the reduced bone mass in the prediction model should examine the bone mineral density to further examine the usefulness of this model. Second, the optimal amount of milk consumption and a regular weight bearing exercise in childhood, adolescence, and early adult should be ensured.

• 폴리머
• /
• 제28권2호
• /
• pp.121-127
• /
• 2004

폴리(에틸렌 나프탈레이트)의 축중합 반응은 가역반응이므로 부반응 물질인 에틸렌 글라이콜의 신속한 제거가 높은 분자량의 제품을 얻는데 매우 중요하다. 본 연구에서는 폴리(에틸렌 나프탈레이트)올리고머로 박막을 제조하여 실제 반응기와 동일한 조건 하에서 (28$0^{\circ}C$, <0.1mmHg) 반응시켜 이 때 일어나는 물질 전달 현상을 관찰하고자 하였다. 여러 가치 두께의 박막을 제조하여 반응 실험한 결과 두께가 0.025cm 이하의 영역에서는 박막에서의 물질 전달 저항이 크지 않아 총괄 반응 속도에 영향을 미치지 않음을 관찰하였다. 물질 전달 모델 및 확산 모델을 사용하여 반응 결과를 예측한 결과 두 모델 모두 실험 결과를 잘 예측하였으나 확산 모델의 경우 중합도가 낮은 영역에서 물질 전달 모델에 비해 반응이 더 빨리 진행되는 경향을 보였다. 두 모델을 이용하여 물질 전달 관련 계수를 예측한 결과 폴리(에틸렌 나프탈레이트)에서의 확산 계수는 4.7${\times}$$10^{-6}$$\textrm{cm}^2$/sec, 물질 전달 계수는 1.4${\times}$$10^{-4}$cm/sce로 폴리(에틸렌 테레프탈레이트) 경우보다 작은 값을 보였다.

• 천문학회지
• /
• 제6권1호
• /
• pp.9-14
• /
• 1973

A simple model of the galactic mass distribution consisting of one sphere and two spheroids with different eccentricities is considered. The resulting model is found to be consistent with the recent observations of the galactic rotation as well as suggested shape of the Galaxy.

• 한국도로학회논문집
• /
• 제17권5호
• /
• pp.1-10
• /
• 2015

PURPOSES : A finite difference model considering snow melting process on porous asphalt pavement was derived on the basis of heat transfer and mass transfer theories. The derived model can be applied to predict the region where black-ice develops, as well as to predict temperature profile of pavement systems where a de-icing system is installed. In addition, the model can be used to determined the minimum energy required to melt the ice formed on the pavement. METHODS : The snow on the porous asphalt pavement, whose porosity must be considered in thermal analysis, is divided into several layers such as dry snow layer, saturated snow layer, water+pavement surface, pavement surface, and sublayer. The mass balance and heat balance equations are derived to describe conductive, convective, radiative, and latent transfer of heat and mass in each layer. The finite differential method is used to implement the derived equations, boundary conditions, and the testing method to determine the thermal properties are suggested for each layer. RESULTS: The finite differential equations that describe the icing and deicing on pavements are derived, and we have presented them in our work. The framework to develop a temperature-forecasting model is successfully created. CONCLUSIONS : We conclude by successfully creating framework for the finite difference model based on the heat and mass transfer theories. To complete implementation, laboratory tests required to be performed.

• 천문학회지
• /
• 제46권6호
• /
• pp.235-242
• /
• 2013

We compare mass-loss rates of OH/IR stars obtained from radio observations with those derived from the dust radiative transfer models and IR observations. We collect radio observational data of OH maser and CO line emission sources for a sample of 1533 OH/IR stars listed in Suh & Kwon (2011). For 1259 OH maser, 76 CO(J=1-0), and 55 CO(J=2-1) emission sources, we compile data of the expansion velocity and mass-loss rate. We use a dust radiative transfer model for the dust shell to calculate the mass-loss rate as well as the IR color indices. The observed mass-loss rates are in the range predicted by the theoretical dust shell models corresponding to $\dot{M}=10^{-8}M_{\odot}/yr-10^{-4}M_{\odot}/yr$. We find that the dust model using a simple mixture of amorphous silicate and amorphous $Al_2O_3$ (20% by mass) grains can explain the observations fairly well. The results indicate that the dust radiative transfer models for IR observations generally agree with the radio observations. For high mass-loss rate OH/IR stars, the mass-loss rates obtained from radio observations are underestimated compared to the mass-loss rates derived from the dust shell models. This could be because photon momentum transfer to the gas shell is not possible for the physical condition of high mass-loss rates. Alternative explanations could be the effects of different dust-to-gas ratios and/or a superwind.

• Journal of Astronomy and Space Sciences
• /
• 제14권1호
• /
• pp.1-17
• /
• 1997

The results of a restricted numerical simulation for the color gradients within globular clusters have been presented. The standard luminosity function of M3 and Salperter's initial mass functions were used to generate model clusters as a fundamental population. Color gradients with the sample clusters for both King and power law cusp models of surface brightness distributions are discussed in the case of using the standard luminosity function. The dependence of color gradients on several parameters for the simulations with Salpter's initial mass functions, such as slope of initial mass functions, cluster ages, metallicities, concentration parameters of King model, and slopes of power law, are also discussed. No significant radial color gradients are shown to the sample clusters which are regenerated by a random number generation technique with various parameters in both of King and power law cusp models of surface brightness distributions. Dynamical mass segregation and stellar evolution of horizontal branch stars and blue stragglers should be included for the general case of model simulations to show the observed radial color gradients within globular clusters.

• 설비공학논문집
• /
• 제12권1호
• /
• pp.102-111
• /
• 2000

A numerical model which simulates the simultaneous heat and mass transfer within a vertical tube GAX absorber was developed. The ammonia vapor and the solution liquid are in counter-current flow, and the hydronic fluid flows counter to the solution liquid. The film thickness and the velocity distribution of the liquid film were obtained by matching the shear stress at the liquid-vapor interface. Two-dimensional diffusion and energy equations were solved in the liquid film to give the temperature and concentration, and a modified Colburn-Drew analysis was used for the vapor phase to determine the heat and mass fluxes at the liquid-vapor interface. The model was applied to a GAX absorber to investigate the absorption rates, temperature and concentration profiles, and mass flow rates of liquid and vapor phases. It was shown that the mass flux of water was negligible compared with that of ammonia except the region near the liquid inlet. Ammonia absorption rate increases rapidly near the liquid inlet and decrease slowly. Both the absorption rate of ammonia vapor and the desorption rate of water near the liquid inlet increase as the vapor mass flow rate increases, but the mass fluxes of the ammonia and the water near the liquid outlet decrease as the mass flow rate of the vapor increases.

• 한국대기환경학회지
• /
• 제21권3호
• /
• pp.329-341
• /
• 2005

The purpose of this study is to study the $PM_{2.5}$ source characteristics affecting the Seoul area using a chemical mass balance (CMB) receptor model. This study was also to evaluate the $PM_{2.5}$ source profiles, which were directly measured and developed. Asian Dust Storm usually occurred in the spring, and very high $PM_{2.5}$ concentrations were observed in the fall among the sampling periods. So the ambient data collected in the spring and fall were evaluated. The CMB model results as well as the $PM_{2.5}$ source profiles were validated using the diagnostic categories, such as: source contribution estimate, t-statistic, R-square, Chi-square, and percent of total mass explained. In the spring months, the magnitude of $PM_{2.5}$ mass contributors was in the following order: Chinese aerosol $(31.7\%)>$ secondary aerosols ($22.3\%$: ammonium sulfate $13.4\%$ and ammonium nitrate $8.9\%)>$ vehicles ($16.1\%$: gasoline vehicle $1.4\%$ and diesel vehicles $14.7\%)>$biomass burning $(15.5\%)>$ geological material $(10.5\%)$. In the fall months, the general trend of the $PM_{2.5}$ mass contributors was the following: biomass burning $(31.1\%)>$ vehicles ($26.9\%$: gasoline vehicle $5.1\%$ and diesel vehicles $21.8\%)>$ secondary aerosols ($23.0\%$: ammonium sulfate $9.1\%$ and ammonium nitrate $13.9\%)>$ Chinese aerosol $(10.7\%)$. The results show that the $PM_{2.5}$ mass in the Seoul area was mainly affected by the Chinese area.