• 한국농공학회논문집
• /
• 제60권5호
• /
• pp.135-147
• /
• 2018

The objective of this study was to analyze the characteristics of combined 1D/2D inundation simulation of riverside farmland using the Hydrologic Engineering Center - River Analysis System (HEC-RAS). We compared and analyzed inundation simulation results between 1D and combined 1D/2D hydraulic simulation using HEC-RAS. Calibration and validation of stream stage were performed using three rainfall events. The coefficient of determination ($R^2$) and root mean square error (RMSE) between simulated and observed stream stage were 0.935 - 0.957 and 0.250 m - 0.283 m in calibration and validation, respectively. The inundation area showed no significant difference in 1D and combined 1D/2D simulation ($8.48km^2$ in 1D simulation, $8.75km^2$ in combined 1D/2D simulation). The average inundation depth by 1D simulation was 1.4 m deeper than combined 1D/2D simulation. In the lower inundation depth, the inundation area by combined 1D/2D simulation was larger than inundation area by 1D simulation. As the inundation depth increased, the inundation area by 1D simulation became wider. In the case of the 1D/2D combined simulation, low elevation areas along the river bank were inundated widely. Compared to 1D/2D combined simulation, the flood radius in some sections was longer in 1D simulation. In the 1D analysis, because the low altitude riverside farmlands are also assumed to stream, it is calculated that riverside farmlands have the same stage as the mainstream when the stream is overflowed. Therefore, the inundation area seems to be overestimated in those sections. In other regions, the inundation areas tend to be broken depending on overflow by each stream cross-section. In the case of river flooding, the overflow is expected to flow to the lower area depending on the terrain, such as the results of the combined 1D/2D simulation. It is concluded that the results of combined 1D/2D inundation simulation reflected the topographical characteristics of low-lying farmland.

• 설비공학논문집
• /
• 제22권10호
• /
• pp.665-671
• /
• 2010

In the present study a 1D-3D numerical simulation was performed to analyze the fire safety in a rescue station of a long railroad tunnel equipped with a mechanical ventilation. The behavior of hot air was studied for the emergency operation mode of ventilation system in case of fire in the rescue station. The 1D simulation was carried out for entire tunnel region. Detailed 3D CFD simulation was performed for the rescue station area in the central region of the tunnel by using the result of the 1D simulation as the boundary condition of the 3D simulation. Various type of cross passage installation were evaluated for the prevention of smoke diffusion to suggest the optimized interval of the cross passages in the rescue tunnel.

• 문화기술의 융합
• /
• 제2권3호
• /
• pp.15-22
• /
• 2016

본 연구는 20대 여성에 대한 재킷의 실제착의와 컴퓨터 시뮬레이션으로 재현된 가상착의 상태를 디자이너 집단과 패터너 집단이 비교 분석하여 가상착의 시스템의 개선 방향을 제시하는 것을 목적으로 수행되었다. 착의 방식에 따른 디자이너 집단의 외관평가 차이 분석에 있어서 앞면에 대한 개 항목 옆면에 대한 개 항목 뒷면에 대한 1개 항목 소매에 대한 개 항목 칼라에 대한 개 항목에서 평가에 대한 차이가 있었다. 착의 방식에 따른 패터너 집단의 외관평가 차이 분석에 있어서 옆면에 대한 개 항목 뒷면에 대한 개 항목 소매에 대한 개 항목 칼라에 대한 개 항목에서 평가에 대한 차이가 있었으며 모든 항목에서 가상착의의 모습이 더 아름답다고 하였다. 착의 방식에 따른 외관평가에 있어서 디자이너 집단과 패터너 집단의 평가가 차이가 있었으며 이는 디자이너 집단과 패터너 집단이 의복의 맞음새를 평가하는 기준이 다르다는 것을 시사한다.

• International Journal of CAD/CAM
• /
• 제4권1호
• /
• pp.19-32
• /
• 2004

This paper presents a new approach to create 3D visualization from discrete simulation results. This approach connects discrete event simulation directly to 3D animation with its novel methods that analyze and convert discrete simulation results into animation events to trigger 3D animation. In addition, it constructs a 3D animation framework for the visualization of discrete simulation results. This framework supports the reuse of both the existing 3D animation objects and behavior components, and allows the rapid development of new 3D animation objects by users with no special knowledge in computer graphics. This approach has been implemented with the software component technology. As an application in virtual manufacturing, visualizations of an electronics assembly factory are also provided in the paper to demonstrate the performance of this new approach.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.615-622
• /
• 2010

본 연구에서는 중형 직분식 선박용 엔진의 성능 및 NOx 배출물 예측을 위한 0-D multi-zone 분무 연소 모델이 개발되었다. 모델은 상용 1-D 사이클 해석 프로그램 (Boost)와 연동할 수 있도록 개발되었으며, 흡배기 시스템을 포함한 엔진 전체에 대한 동시 해석이 가능하였다. 연소 모델은 Fortran90 으로 개발되었으며, AVL 에서 제공된 'user defined high pressure cycle (UDHPC) interface'를 통해 Boost 와 연동되었다. 두 가지의 인젝터(8 홀, 10 홀)에 대해 두 가지 부하에서 해석을 수행하였으며, 해석 결과는 실제 엔진의 성능 실험 결과를 잘 추종하였다.

• Journal of International Society for Simulation Surgery
• /
• 제1권1호
• /
• pp.23-26
• /
• 2014

The aim of this report is to evaluate accuracy using3D surgical simulationand digitally printedwafer in orthognathic surgery. 22-year-old female was diagnosed with mandibular prognathism and apertognathia based on 3D diagnosis using CT. Digital dentition images were taken by laser scanning from dental cast, and each STL images were integrated into one virtual skull using simulation software. Digitalized intermediate wafer was manufactured using CAD/CAM software and 3D printer, and used to move maxillary segment in real patient. Constructed virtual skull from 1 month postoperative CT scan was superimposedinto simulated virtual model to reveal accuracy. Almost maxillo-mandibular landmarks were placed in simulated position within 1 mm differences except right coronoid process. Thus 3D diagnosis, surgical simulation, and digitalized wafer could be useful method to orthognathic surgery in terms of accuracy.

• 한국시뮬레이션학회논문지
• /
• 제16권2호
• /
• pp.65-74
• /
• 2007

가상생산기술은 신제품의 개발, 새로운 장비 개발 및 새로운 제조시스템 개발에 유용한 도구이며, 특히 3D 시뮬레이션 기술은 가상생산의 핵심기술이다. 3D 시뮬레이션 기술은 기계적 시뮬레이션 기술과 이산사건 시뮬레이션 기술로 구분할 수 있다. 본 논문에서는 휴대폰 카메라에 장착되는 렌즈모듈 조립을 생산하는 국내 회사의 사례를 소개한다. 이 회사에서는 렌즈모듈 조립공정을 현재 수작업으로 하고 있는데 자동화시스템을 개발하기로 결정하였으며 이를 위해 3D 시뮬레이션 기술을 도입하기로 하였다. 3D 시뮬레이션 기술은 시스템 개념설계단계에서부터 적용이 되었는데, 단위 장비 개발을 위해서는 $CATIA^{(R)}$와 $IGRIP^{(R)}$이 활용되었으며, 시스템 설계를 위해서는 이산사건 시뮬레이션 도구인 $QUEST^{(R)}$가 활용되었다. 논문의 목적은 새로운 자동화 설비의 기술적. 경제적 타당성을 검증하는 것이다. 개발결과 takt time 이 기존의 수작업에 비해 4분의 1 수준으로 감소되었으며, 이에 따른 작업자 인원도 대폭 감소되었다.

• Current Optics and Photonics
• /
• 제5권2호
• /
• pp.101-113
• /
• 2021

Adaptive optics (AO) systems are becoming more complex to improve their optical performance and enlarge their field of view, so it is a hard and time consuming process to set up and optimize the components of AO systems with actual implementation. However, simulations allow AO scientists and engineers to experiment with different optical layouts and components without needing to obtain and prepare them physically. In this paper, we introduce a new AO simulation named the Korea Adaptive Optics Simulation (KAOS), independently developed by LIG Nex1. We verified the performance of KAOS by comparing with other AO simulation tools. In the comparison simulation, we confirmed the results from KAOS and other AO simulation tools were very similar. Also, we proposed a laser tomography AO system with five Rayleigh laser guide stars (LGSs) optimized by using KAOS to overcome the disadvantages of the AO system with a single sodium LGS for the satellite imaging system. We verified the performance of the proposed AO system using KAOS, and the simulation result showed averaged Strehl ratio of 0.37.

• 전자공학회논문지D
• /
• 제35D권3호
• /
• pp.28-38
• /
• 1998

In our paper is reported a new 3D(dimensional) trajectory split approach with greatly improved efficiency for the Monte Carlo simulation of the 3D profiles of implanted ionand point defect concentrations in single-crystal silicon. This approach has been successfully implemented in our TRICSI Monte Carlo code. Combined with the previously developed model for damage accumalation in our TRICSI code, this model allows phasically based dynamic simulation of 3D profiles over an subsequent process simulation such as diffusion modeling and simulation. A typical time saving of over 10 timeshas been achieved for 3D simulation. Our method ensures much better region aground the implanted area. For 1-D simulation, the optimized condition for trajectory split has set to 3,000 pseudoparticles with 2 split branches.

• 상하수도학회지
• /
• 제26권1호
• /
• pp.87-95
• /
• 2012

In this study, the following conclusions were obtained from an investigation of the effect of the simulation time step on the simulation results of the two-dimensional, vertically averaged sediment transport model SED2D and an analysis of the deposited sediment distribution in suspended sediments of reservoirs according to grain size. The simulation time step has a significant effect on the deposited sediment distribution in a reservoir. In particular, if the simulation time step is set to be excessively large, physically invalid results are obtained. Additionally, in order to determine an appropriate simulation time step for SED2D, the selection of a simulation time step that will allow the analysis of the suspended sediment concentration profile at the main points of the simulation domain is necessary. The deposited sediment distribution in a reservoir according to grain size, including suspended sediments of clay, silt, and sand, was successfully simulated. Such information will prove valuable in application to the establishment of efficient management and reduction measures of reservoir sediment deposits.