• 대한기계학회논문집A
• /
• 제20권3호
• /
• pp.910-932
• /
• 1996

A problem of determining the effective conductivity of a useful model of sphere-matrix type, disordered three-phase composite media is considered. Specifically, a three-phase media in which two-phase composite spheres, consisting of spheres of conductivity $k_2$((phase 2) and concentric shells of conductivity $k_3$(phase 3), are randomly distributed in a matrix of conductivity $k_1$( (phase 1) is considered. As for the structure models configuring three-phase composite media, three different structure models of PCS, PS-1 and PS-2 models are defined, which are analogous to well-established PCS, PS structure models of two-phase composite media. Futhermore, a generalized PS-PCS structure model is proposed to incorporate thesee three different models in one. Effective condectivity $k^{\ast}$of multiphaes composite media is greatly influenced by the phase connectivity of each disspersed phase material, as well as phase conductivities and phase volume fractions. Phase connectivity of three-phase PCS, PS-1, PS-2 composite media is quantified by the impentrability parameter $\lambda$. Mathematically rigorous first-order cluster bounds on $k^{\ast}$ are derived for these models of three-phase composite media, and as computation examples, first-order cluster bounds on $k^{\ast}$ for three-phase composites consisting of largely different phase conductivities are computed and compared as function of concnectivity parpmeter $\lambda$. Results and discussions are given.

• The Journal of Advanced Prosthodontics
• /
• 제6권3호
• /
• pp.194-199
• /
• 2014

PURPOSE. This study evaluated the depth of cure of resin composite cured by light through a translucent fiber post. MATERIALS AND METHODS. The opaque plastic tubes in various lengths of 2, 4, 6, 8, 10, 12, 14 mm. were filled with resin composite in which two different translucent fiber posts were inserted into the center and photo-polymerized for 40 seconds. The degree of conversion of the cured composite at bottom surface were examined using Fourier transform infrared attenuated total reflection spectrometer (FTIR/ATR) at 0.1, 0.5 and 1.0 mm apart from the post surface. RESULTS. The degree of conversion of the 0.1 mm, 0.5 mm, 1.0 mm apart from the post surface was highest at the 2 mm level and continuously decreased when the distance from the light source was increased and drastically decreased when the depth from the top of the post was greater than 4-6 mm. For each level, the highest degree of conversion was at 0.1 mm from the post surface and decreased continuously when the distance apart from the post surface was increased. CONCLUSION. The quantity of light transmission depends on the type of post and the light transmission capability of the post, especially after 4-6 mm depth and the area further apart from the post surface, are insufficient for clinical light activation of resin composite.

• Composites Research
• /
• 제31권1호
• /
• pp.37-41
• /
• 2018

본 연구에서는 IIHS기준 범퍼 충돌해석을 통하여, 구간 조합 복합 범퍼 빔의 특성 분석하였다. 충돌 시 범퍼 빔의 5개 영역에서 지배적인 하중 유형에 대한 정보를 얻기 위해 Al 범퍼 빔에 대한 IIHS 범퍼 충돌 해석이 진행되었다. 또한, 항공우주 분야에서 빈번히 사용되는 5가지 적층순서 중, 인장 및 압축하중에 가장 효과적인 적층순서가 복합재료 쿠폰 해석을 통해 결정되었다. 이와 더불어, 결정된 두가지 복합재료의 적층순서를 적용한 복합재료 빔에 대해 3점 굽힘 해석이 수행되었다. 마지막으로, IIHS 범퍼 충돌 해석을 진행하여 구간 조합으로 이루어진 복합재료 범퍼 빔을 다른 유형의 복합 범퍼 빔과 비교하였다. 제안된 구간조합 복합재료 범퍼 빔은 단일 적층순서로 이루어진 복합재료 범퍼 빔에 비해 우수한 충돌 특성을 나타내었다.

• 정보기술과데이타베이스저널
• /
• 제3권1호
• /
• pp.45-63
• /
• 1996

This paper presents an integrated object-oriented database approach for managing the evolution of products in agile manufacturing environments, Schema evolution modification facilities are provided to support full potential versioning of type definitions. All of the possible versions for a composite product are not explicitly represented to avoid version proliferation. However, valid configurations of any composite products can be provided to comply with customer demands, The attributes of composite products are classified in order to provide well-defined representation scheme for composite products and to be exploited in version control. The attributes are partitioned into composite-related and non composite-related categories. Composite-related attributes consist of subproducts and description ones. Subproducts attributes represent physical constituents of a composite product. Description attributes represent external features, assembling, and correspondence property. Interface attributes are introduced for managing configurability and version propagation. Version derivations due to the changes to the interface attributes are propagated toward the product composition hierarchy, The validity of configurations of composite products is checked by using configurability maps. Instance objects which represent the actual product instances are stored and manipulated in the database in order to support traceability during product life cycle.

• Steel and Composite Structures
• /
• 제37권1호
• /
• pp.1-14
• /
• 2020

Composite beams with corrugated steel webs represent a new innovative system which has emerged in the past decade for medium span in the construction technology. The use of composite beams with corrugated steel webs results in a range of benefits, including flexible spaces and reduced foundation costs in the construction technology. The thin corrugated web affords a significant weight reduction of these beams, compared with hot-rolled or welded ones. In the current research, an optimal designed I-girder beam with corrugated web has been proposed to improve the structural performance of continuous composite girder under bending moment. The experimental program has been conducted for six simply supported composite beams with different loading conditions. The tested specimens are designed by using one of the stochastic techniques called hunting search algorithm. In the optimization process, besides the thickness of concrete slab and studs, corrugated web properties are considered as design variables. The design constraints are respectively implemented from Eurocode 3, BS-8110 and DIN 18-800 Teil-1. The last part of the study focuses on performing a numerical study on composite beams by utilizing finite element analysis and the bending behavior of steel girders with corrugated webs experimentally and numerically verified the results. A nonlinear analysis was carried out using the finite element software ANSYS on the composite beams which were modelled using the elements ten-node high order quadrilateral type.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.121-132
• /
• 1991

The purpose of the study was to evaluate the marginal sealing effect of composite resin inlays according to the luting techniques and compare them to the conventional direct resin filling technique. 90 cavities of class V were prepared on the buccal surface of 90 extracted molar teeth, which were divided into four groups. Cavities of control group were directly filled with Scotchbond 2 and P - 50, and those of composite resin inlay groups were luted with one of the followings: Adhesive bond followed by Adhesive cement, All bond followed by Adhesive cement, Fuji - ionomer type L All the specimens were immersed in India ink dye solution for 7 days at $37^{\circ}C$ incubator after thermocycling between $5^{\circ}C$ and $60^{\circ}C$ and longitudinally sectioned with diamond disk inot two parts All the specimens were observed at the occlusal and gingival margins and statistical analysis was performed. The results were as follows: 1. Groups filled with composite resin inlay showed less marginal leakage than the group directly filled(p<0.01). 2. There was no significant difference in marginal leakage between composite resin inlay groups luted with Adhesive bond followed by Adhesive cement and the group luted with All bond followed by Adhesive cement(p>0.05). 3. At occlusal margins, Composite resin inlay group luted with Adhesive bond followed by Adhesive cement showed less marginal leakage than the group luted with Fuii ionomer type I(p<0.01). At gingival margins, composite resin inlay group luted with All bond followed by Adhesive cement showed less marignal leakage than the group luted with Fuji ionomer type I(P<0.01).

• 대한치과기공학회지
• /
• 제39권1호
• /
• pp.9-16
• /
• 2017

Purpose: The purpose of this study was to evaluate flexural strength, composite surface and fractured surface of three different indirect composite resins. Methods: Fifteen bar-shaped specimens ($25mm{\times}2mm{\times}2mm$) were fabricated for each FL group (Flow type and Light curing) and PLP group (Putty type and Light, Pressure curing) and PL group (Putty type and Light curing) according to manufacturer's instructions and ISO 10477. Fabricated specimens were stored in the distilled water for 24 hours at the temperature of $37^{\circ}C$. Three-point bending strength test was performed to measure flexural strength using universal testing machine at a crosshead speed of 1mm/min (ISO 10477). Surface and fractured surface of specimens were observed by digital microscope. Results were analyzed with Kruskal-wallis tests (${\alpha}=0.05$). Results: Mean (SD) of three different indirect composite resins were 83.38 (6.67) MPa for FL group, 139.90(16.53) MPa for PLP group and 171.72(16.74) MPa for PL group. Flexural strength were statistically significant (p<0.05). Differences were not observed at fractured surface among three groups. However, many pores over $100{\mu}m$ were observed at PL group in observing surface of specimen. Conclusion: Flexural strength of composite resins was affected by second polymerization method and content of inorganic filler.

• Composites Research
• /
• 제34권1호
• /
• pp.16-22
• /
• 2021

폴리우레탄폼(PUF)은 연질, 반경질, 경질 형태로 제작이 가능하여 산업적으로 다양한 분야에서 활용되고 있다. 그 중에서도 경질 폴리우레탄폼은 우수한 기계적 특성과 낮은 열전도도를 가지고 있어, 건축물의 단열재와 천연가스 운수송 분야에서 보냉재로 사용되고 있다. 해당 분야에서는 기계적 강도는 높이고 열전도도는 낮추고자 하는 기술적 수요가 꾸준히 요구되고 있다. 본 연구에서는 경질 폴리우레탄폼을 제작하고, 교반기의 임펠러 형태(Propeller, Dispersed turbine)에 따른 폼의 미세구조와 물성 변화를 연구하였다. FE-SEM 이미지 및 Micro-CT 분석을 통해 Dispersed turbine으로 제조한 폼의 평균 기공 크기가 Propeller로 제조한 기공보다 21.5% 작은 것을 확인하였다. 압축 강도는 작은 기공을 가진 폼에서 15.4% 향상되었고, 열전도도는 3.1% 감소하였다. 이러한 결과는 PUF 복합재 제조에 활용될 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.317-320
• /
• 1999

In this study, the piezoelectric ceramics PZT powder was synthesized by Wet-Dry combination method. And the flexible 1-3-0 type composites were fabricated with piezoceramic PZT and Eccogel polymer matrix embedded 3rd phase. Dielectric constant of 1-3-0 type composites was lower than that of single phase PZT ceramics. Thickness mode coupling factor k/sub t/ which was comparable with single phase PZT ceramics and mechanical quality factor Qm were about 0.65 and 6, respectively. These composites are considered as a good candidates for broad-band type transducer applications. The acoustic impedance of 1-3-0 type composites was lower than that of single phase PZT ceramics. Therefore, these composites would be better used for hydrophone applications.

• Restorative Dentistry and Endodontics
• /
• 제25권1호
• /
• pp.109-115
• /
• 2000

This study was designed to evaluate the microhardness of restorative composite resin and dual-cured composite resin cement which were light cured through the 1.5mm thickness composite overlay. For restorative materials, Z100 and Tetric Ceram were used. For dual cured composite cements, Variolink II((VL II) of three consistency (low, high, ultra high) were used. To determine the optimal microhardness of Z100, Tetric Ceram and Variolink II, each material was packed into the 1mm thickness teflon mold without composite overlay and light cured for 60 seconds. Then the microhardnesses of each sample were measured, averaged and regarded as optimal hardness of each material. To evaluate the microhardness of restorative composite resin and dual-cured composite resin cement which were light cured through the 1.5mm thickness composite overlay, the composites were packed into 1mm thickness teflon mold, coverd with celluloid strip, and then precured composite overlay which was made of Targis(Ivoclar/Vivadent, Liechtenstein) was positioned. 2 types of visible light curing machine, the power density of one of which was 400$mW/cm^2$ and the other was 900$mW/cm^2$, and one type of argon laser were used to cure the restorative composite and dual cured cement. For each group, 10 sample were assigned. The light curing tip was positioned over the composite overlay and light cured for 1min., 2min. or 3min with visible light curing machine or 15sec, 30 sec, 45sec, and 60 sec with argon laser. The Vickers hardnesses of upper and lower surface of Z100, Tetric Ceram, and 3 types of VL II cement were measured. When the 900 $mW/cm^2$ curing light was used, 2min. was needed for optimal curing of Z100 and Tetric Ceram. Variolink II did not be cured optimally even though the curing time was extended to 3min. When 400$mW/cm^2$ curing light was used, 3min. was necessary for Z100, whereas 3min. was not enough for Tetric Ceram. Variolink II was not cured optimally even though the curing time was extended to 3min. When argon laser was used, Z100, Tetric Ceram and Variolink II were not cured optimally in 60 seconds.