• Title/Summary/Keyword: 1 MVA

Search Result 132, Processing Time 0.021 seconds

A Development of a Distribution STATCOM for Voltage Regulation and Harminic Mitigation (전압조정과 고조파 저감을 위한 배전용 STATCOM 개발)

  • 추진부;전영수;윤종수;한영성;홍순욱;이학성;신희승
    • The Transactions of the Korean Institute of Power Electronics
    • /
    • v.4 no.6
    • /
    • pp.601-607
    • /
    • 1999
  • 본 논문에서는 순간전압조정, 역률 보상, 고조파 저감에 대한 배전용 정지형 동기조상기(STATCOM : STATic COMpensator)에 대한 다양한 제어 모드를 제안하고 있다. 이러한 제어 알고리즘의 성능을 검증하기 위해 각 제어 알고리즘을 20kVA의 축소형 STATCOM에 적용하고 간단한 배전계통을 꾸며 시험하였다. 실험결과로부터 제안한 제어알고리즘이 Custom Power 시스템으로 훌륭한 성능을 보임을 확인할 수 있었다. 실재 배전계통에 적용하여 현재 1MVA STATCOM이 성공적으로 운전되고 있다.

  • PDF

A Novel ZVS 3-Level Resonant Pole Inverter (새로운 ZVS 3-레벨 공진폴 인버터)

  • Baek, Ju-W.;Cho, Jung-G.;Yoo, Dong-W.;Song, Doo-I.;Won, Cung-Y.
    • Proceedings of the KIEE Conference
    • /
    • 1995.07a
    • /
    • pp.360-364
    • /
    • 1995
  • A zero voltage switching (ZVS) three level resonant pole inverter is presented for high power GTO inverters. The concept of auxiliary resonant commutated pole(ARCP) for two level inverter is extended to the three level inverter. The proposed auxiliary commutation circuit consists of one resonant inductor and two bi-directional switches, which provides ZVS condition to the main devices without increasing device voltage or current stresses. The auxiliary device operates with zero current switching(ZCS) which enables use of the low cost thyristors. The proposed circuit can handle higher voltage and higher power(1-10MVA) comparing to the two level one. Operation and analysis of the proposed circuit are illustrated. Experimental results with 10 KW, 4 kHz prototype are presented to verify the principle of operation.

  • PDF

Feasibility Study of the application of HVDC System to Domestic Power System ' Design of the HVDC system for Sinokchun-Sedaegu 345kV Transmission line (직류변환 송전방식 국내도입 타당성 검토 : 신옥천-서대구 345kV송전선로 1회선 직류변환 설계)

  • Kim D. J.;Yoon J. Y.;Yang K. H.;Moon Y. H.;Lee D. I.;Shin G. Y.
    • Proceedings of the KIEE Conference
    • /
    • summer
    • /
    • pp.186-188
    • /
    • 2004
  • This paper describes the feasibility study of HVDC system application to KEPCO power system for increasing power transfer capability or the flexibility of power delivery from one area to the other using the existing transmission line. This paper assumes the 345kV transmission line connecting between Shinokchun and Sedaegu to be converted to the DC line by replacing the AC insulator with that of DC. Then, the HVDC bipole system of 1000MVA with $\pm300kV$ is designed and the contingency studies are carried out.

  • PDF

The Consideration for Optimum 3D Seismic Processing Procedures in Block II, Northern Part of South Yellow Sea Basin (대륙붕 2광구 서해분지 북부지역의 3D전산처리 최적화 방안시 고려점)

  • Ko, Seung-Won;Shin, Kook-Sun;Jung, Hyun-Young
    • The Korean Journal of Petroleum Geology
    • /
    • v.11 no.1 s.12
    • /
    • pp.9-17
    • /
    • 2005
  • In the main target area of the block II, Targe-scale faults occur below the unconformity developed around 1 km in depth. The contrast of seismic velocity around the unconformity is generally so large that the strong multiples and the radical velocity variation would deteriorate the quality of migrated section due to serious distortion. More than 15 kinds of data processing techniques have been applied to improve the image resolution for the structures farmed from this active crustal activity. The bad and noisy traces were edited on the common shot gathers in the first step to get rid of acquisition problems which could take place from unfavorable conditions such as climatic change during data acquisition. Correction of amplitude attenuation caused from spherical divergence and inelastic attenuation has been also applied. Mild F/K filter was used to attenuate coherent noise such as guided waves and side scatters. Predictive deconvolution has been applied before stacking to remove peg-leg multiples and water reverberations. The velocity analysis process was conducted at every 2 km interval to analyze migration velocity, and it was iterated to get the high fidelity image. The strum noise caused from streamer was completely removed by applying predictive deconvolution in time space and ${\tau}-P$ domain. Residual multiples caused from thin layer or water bottom were eliminated through parabolic radon transform demultiple process. The migration using curved ray Kirchhoff-style algorithm has been applied to stack data. The velocity obtained after several iteration approach for MVA (migration velocity analysis) was used instead or DMO for the migration velocity. Using various testing methods, optimum seismic processing parameter can be obtained for structural and stratigraphic interpretation in the Block II, Yellow Sea Basin.

  • PDF

Design of Submarine Cable for Capacity Extension of Power Line (전력선 용량증대를 위한 해저케이블 설계)

  • Son, Hong-Chul;Moon, Chae-Joo;Kim, Dong-Sub
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.17 no.1
    • /
    • pp.77-84
    • /
    • 2022
  • A submarine power cable is a transmission cable for carrying electric power below the surface of the water. Recently, submarine cables transfer power from offshore renewable energy schemes to shore, e.g. wind, wave and tidal systems, and these cables are either buried in the seabed or lie on the ocean floor, depending on their location. Since these power cables are used in the extreme environments, they are made to withstand in harsh conditions and temperatures, and strong currents. However, undersea conditions are severe enough to cause all sorts of damage to offshore cables, these conditions result in cable faults that disrupt power transmission. In this paper, we explore the design criteria for such cables and the procedures and challenges of installation, and cable transfer splicing system. The specification of submarine cable designed with 3 circuits of 154kV which is composed of the existing single circuit and new double circuits, and power capacity of 100MVA per cable line. The determination of new submarine cable burial depth and cable arrangement method with both existing and new cables are studied. We have calculated the permission values of cable power capacity for underground route, the values show the over 100MW per cable line.

Fabrication and Characteristic Tests of a 1 MVA Single Phase HTS Transformer with Concentrically Arranged Windings

  • Kim, S.H.;Kim, W.S.;Choi, K.D.;Joo, H.G.;Hong, G.W.;Han, J.H.;Lee, H.G.;Park, J.H.;Song, H.S.
    • Progress in Superconductivity and Cryogenics
    • /
    • v.6 no.4
    • /
    • pp.37-40
    • /
    • 2004
  • A 1 MV A single phase high temperature superconducting (HTS) transformer was manufactured and tested. The rated voltages of primary and secondary of the HTS transformer are 22.9 kV and 6.6 kV respectively. BSCCO-2223 HTS tape was used for HTS windings of 1 MV A HTS transformer. In order to reduce AC loss generated in the HTS winding, the type of concentric arrangement winding was adopted to a 1 MV A HTS transformer. Single HTS tape for primary windings and 4 parallel HTS tapes for secondary windings were used considering the each rated current of the HTS transformer. A core of HTS transformer was fabricated as a shell type core made of laminated silicon steel plate. And a GFRP cryostat with a room temperature bore was also manufactured. The characteristic tests of 1 MV A HTS transformer were performed such as no load test, short circuit test and several insulation tests at 65 K using sub-cooled liquid nitrogen. From the results of tests, the validity of design of HTS transformer was ascertained.

Characteristics of Insulation Diagnosis and Failure in Gas Turbine Generator Stator Windings

  • Kim, Hee-Dong
    • Journal of Electrical Engineering and Technology
    • /
    • v.9 no.1
    • /
    • pp.280-285
    • /
    • 2014
  • In order to evaluate the insulation deterioration in the stator windings of five gas turbine generators(137 MVA, 13.8 kV) which has been operated for more than 13 years, diagnostic test and AC dielectric breakdown test were performed at phases A, B and C. These tests included measurements of AC current, dissipation factor, partial discharge (PD) magnitude and capacitance. ${\Delta}I$ and ${\Delta}tan{\delta}$ in all three phases (A, B and C) of No. 1 generator stator windings showed that they were in good condition but PD magnitude indicated marginally serviceable and bad level to the insulation condition. Overall analysis of the results suggested that the generator stator windings were indicated serious insulation deterioration and patterns of the PD in all three phases were analyzed to be internal, slot and spark discharges. After the diagnostic test, an AC overvoltage test was performed by gradually increasing the voltage applied to the generator stator windings until electrical insulation failure occurred, in order to determine the breakdown voltage. The breakdown voltage at phases A, B and C of No. 1 generator stator windings failed at 28.0 kV, 17.9 kV, and 21.3 kV, respectively. The breakdown voltage was lower than that expected for good-quality windings (28.6 kV) in a 13.8kV class generator. In the AC dielectric breakdown and diagnostic tests, there was a strong correlation between the breakdown voltage and the voltage at which charging current increases abruptly ($P_{i1}$, $P_{i2}$).

Assessment of an Apo-1/Fas Promoter Polymorphism in Korean Schizophrenia Patients

  • Kim, Soon-Ae;Kim, Youn-Jung;Choe, Bong-Keun;Lee, Hee-Jae;Kim, Jong-Woo;Park, Jong-Deuk;Kim, Chang-Ju;Park, Seung-Joon;Jung, Jee-Chang;Chung, Joo-Ho
    • The Korean Journal of Physiology and Pharmacology
    • /
    • v.6 no.3
    • /
    • pp.161-163
    • /
    • 2002
  • Apoptosis has been hypothesized to be involved in the pathogenesis in schizophrenia. A large number of genes are known to mediate the apoptotic process; Apo-1/Fas (CD95) is a well-known example of such genes. In the present study, MvaI restriction fragment length polymorphism, a polymorphic marker present within the Apo-1/Fas gene, was examined in a population consisting of 226 control subjects and 110 schizophrenia patients, all of them Korean in ethnicity. No statistically significant difference in the genotypic distribution and allelic frequencies was observed between the control and the schizophrenia patient group. To find out the precise effect of Apo-1/Fas gene polymorphisms on the susceptibility to schizophrenia, further studies are warranted to investigate possible involvement of other polymorphisms with a larger sample population.

Performance of Homologous and Heterologous Prime-Boost Immunization Regimens of Recombinant Adenovirus and Modified Vaccinia Virus Ankara Expressing an Ag85B-TB10.4 Fusion Protein against Mycobacterium tuberculosis

  • Kou, Yiming;Wan, Mingming;Shi, Wei;Liu, Jie;Zhao, Zhilei;Xu, Yongqing;Wei, Wei;Sun, Bo;Gao, Feng;Cai, Linjun;Jiang, Chunlai
    • Journal of Microbiology and Biotechnology
    • /
    • v.28 no.6
    • /
    • pp.1022-1029
    • /
    • 2018
  • Tuberculosis (TB) remains a serious health issue around the word. Adenovirus (Ad)-based vaccine and modified vaccinia virus Ankara (MVA)-based vaccine have emerged as two of the most promising immunization candidates over the past few years. However, the performance of the homologous and heterologous prime-boost immunization regimens of these two viral vector-based vaccines remains unclear. In the present study, we constructed recombinant Ad and MVA expressing an Ag85B-TB10.4 fusion protein (AdH4 and MVAH4) and evaluated the impact of their different immunization regimens on the humoral and cellular immune responses. We found that the viral vector-based vaccines could generate significantly higher levels of antigen-specific antibodies, $IFN-{\gamma}$-producing splenocytes, $CD69^+CD8^+$ T cells, and $IFN-{\gamma}$ secretion when compared with bacillus Calmette-$Gu{\acute{e}}rin$ (BCG) in a mouse model. AdH4-containing immunization regimens (AdH4-AdH4, AdH4-MVAH4, and MVAH4-AdH4) induced significantly stronger antibody responses, much more $IFN-{\gamma}$-producing splenocytes and $CD69^+CD8^+$ T cells, and higher levels of $IFN-{\gamma}$ secretion when compared with the MVAH4-MVAH4 immunization regimen. The number of $IFN-{\gamma}$-producing splenocytes sensitive to $CD8^+$ T-cell restricted peptides of Ag85B (9-1p and 9-2p) and Th1-related cytokines ($IFN-{\gamma}$ and $TNF-{\alpha}$) in the AdH4-MVAH4 heterologous prime-boost regimen immunization group was significantly higher than that in the other viral vector-based vaccine- and BCG-immunized groups, respectively. These results indicate that an immunization regimen involving AdH4 may have a higher capacity to induce humoral and cellular immune responses against TB in mice than that by regimens containing BCG or MVAH4 alone, and the AdH4-MVAH4 prime-boost regimen may generate an ideal protective effect.

Design of HTS power cable with fault current limiting function

  • Kim, Dongmin;Kim, Sungkyu;Cho, Jeonwook;Kim, Seokho
    • Progress in Superconductivity and Cryogenics
    • /
    • v.22 no.1
    • /
    • pp.7-11
    • /
    • 2020
  • As demand for electricity in urban areas increases, it is necessary to improve electric power stability by interconnecting neighboring substations and high temperature superconductor (HTS) power cables are considered as a promising option due to its large power capacity. However, the interconnection of substations reduces grid impedance and expected fault current is over 45 kA, which exceeds the capacity of a circuit breaker in Korean grid. To reduce the fault current below 45 kA, a HTS power cable having a fault current limiting (FCL) function is considered by as a feasible solution for the interconnection of substations. In this study, a FCL HTS power cable of 600 MVA/154 kV, transmission level class, is considered to reduce the fault current from 63 kA to less than 45 kA by generating an impedance over 1 Ωwhen the fault current is induced. For the thermal design of FCL HTS power cable, a parametric study is conducted to meet a required temperature limit and impedance by modifying the cable core from usual HTS power cables which are designed to bypass the fault current through cable former. The analysis results give a minimum cable length and an area of stainless steel former to suppress the temperature of cable below a design limit.