• The Magazine of Kiice
• /
• v.11 no.1
• /
• pp.54-59
• /
• 2010

• Korea Multimedia Society
• /
• v.8 no.1
• /
• pp.58-75
• /
• 2004

컴퓨터의 성능 향상과 인터넷 기술의 발달로 멀티미디어 분야에 대한 연구가 활발히 진행 중에 있다. 그 중 컴퓨터 그래픽스 기술을 이용한 3차원 표현이 핵심 분야로 부각되고 있다. 전통적인 모델 기반 그래픽스 기술은 그동안 실세계의 사실적인 표현에 목적을 두고 3차원 모델링 기술, 텍스춰 매핑 기술, 엘어리징 제거 기술, 완전 조명 모델 기술 등과 같은 연구를 진행하여 왔다.(중략)

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.405-411
• /
• 2016

This paper presented the theory related to a two dimensional linear cross-sectional analysis, recovery relationship and a one-dimensional nonlinear beam analysis for composite beam with initial twist and high aspect ratio. Using VABS including related theory, preceding research data of the composite wing structure has been modeled and compared. Cross-sectional analysis was performed and 1-D beam was modeled at cutting point including all the details of real geometry and material. The 3-D strain distribution and margin of safety at recovery point was calculated based on the global behavior of the 1-D beam analysis and visualize numerical results.

• The Journal of Engineering Geology
• /
• v.10 no.1
• /
• pp.13-25
• /
• 2000

A three-dimensional discrete fracture network model based on probabilistic characteristics of fracture geometry and transmissivity was designed to calculate the conductivity tensor and to estimate theanisotropy of conductivity. The conductivities, $K_p$, obtained from the numerical simulation of single-holepacker test corresponded well to those from the field tests. From this, it can be concluded that thefracture network model designed in this study can represent hydraulic characteristics of in-situ fractured rock mass. Block-scale conductivities, $K_b$, estimated from the modelling of steady-state flow through the REV-scale block were ranged between the arithmetic mean and harmonic mean of theconductivity estimates from packer tests. The conductivity along north-south direction was 1.4 timesgreater than that along the east-west direction. It was concluded that the anisotropy of conductivitywas insignificant. It was also found that there was a little correlation between $K_b$ and $K_p$. This would be to that the conductivities from the packer test simulation was strongly dependent on thetransmissivity and the number of fractures within the packer test intervals.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.518-518
• /
• 2023

자연하천에서 오염물질의 혼합 거동은 비균일한 지형학적 요인으로 인해 매우 복잡한 특성을 나타낸다. 일반적으로 오염물질 거동 모델링에서는 수체에서의 혼합을 Fick의 법칙에 따라 유속에 의한 이송과 난류에 의한 확산으로 계산하고, 국부적인 정체현상 등에 의한 non-Fickian 혼합을 야기하는 하천의 특성을 기하학적 지형 형상으로 구현하여 실제 현상에 근접한 혼합 거동을 재현한다. 하지만 계산의 효율성을 위하여 모델링의 차원을 낮추는 경우, 하천의 지형을 경계조건으로 고려할 수 없게 된다. 특히, 1차원 모델링의 경우 하천의 비균일성을 무시하고 1개의 유선으로 간주하며, 이 경우 non-Fickian 물질이동 해석을 위한 추가적인 현상학적 해석이 필요하다. 지난 50년간, non-Fickian 물질이동 해석을 위한 다양한 현상학적 모형이 제시되어 왔다. 하천을 흐름영역과 정체영역으로 구분하고 두 개의 영역 사이의 물질교환 속도를 모델링하거나, Random walk 개념으로 물질이 이동하는 경우와 이동하지 않는 경우를 확률론적으로 모델링하거나, 물질이 정체되었을 때 다시 빠져나오는 시간을 모델링하는 경우가 그 예이다. 본 연구에서는 선행연구에서 제시한 음함수 형태의 현상학적 모형을 기반으로, 수치적 반복계산 없이 상류 경계에서 임의의 형태의 농도곡선(shape-free breakthrough curve)을 갖는 오염물질운(cloud)이 일정 거리를 유하하며 발생하는 변화를 예측할 수 있는 해를 제시한다. 본 연구의 방법론은 추적법(routing procedure)을 활용한 Fickian 혼합 해석, 전달함수(transfer function) 형태의 정체시간분포 해석, 그리고 라플라스 도메인에서의 해석해 유도를 포함한다. 본 연구에서 제시된 해는 2020년 경상북도 김천시에 위치한 감천의 4.5 km 구간에서 수행한 추적자 실험의 현장 자료를 통해 정확도를 검증하여 타당성을 입증하였다.

• Journal of Game and Entertainment
• /
• v.2 no.1
• /
• pp.64-70
• /
• 2006

CAD system is a very important technology in designing many products which we are using today. This CAD technology have enlarging its area into 3D CAD systems with the development of computer graphics technologies. In particular, such advances have also been realized in special area such as the CAD system for designing shoes. 3D CAD systems for shoes design must provide compatibility between 3D and 2D data because shoes are made using 2D parts of pieces of leather or cloth. Many designers get high performances using 2D shoe CAD systems because they have had long practices with the 2D systems. Therefore, to get the mapping between 2D modeling and 3D modeling is one of very important components in 3D CAD system. In this paper, we proposed a flattening method that convert 3D shoes data to 2D data.

• Journal of the HCI Society of Korea
• /
• v.2 no.2
• /
• pp.1-9
• /
• 2007

In this paper, we propose a reconstruction technique of the lost hair region for 3D human actor modeling. An active depth sensor system can simultaneously capture both color and geometry information of any objects in real-time. However, it cannot acquire some regions whose surfaces are shiny and dark. Therefore, to get a natural 3D human model, the lost region in depth image should be recovered, especially human hair region. The recovery is performed using both color and depth images. We find out the hair region using color image first. After the boundary of hair region is estimated, the inside of hair region is estimated using an interpolation technique and closing operation. A 3D mesh model is generated after performing a series of operations including adaptive sampling, triangulation, mesh smoothing, and texture mapping. The proposed method can generate recovered 3D mesh stream automatically. The final 3D human model allows the user view interaction or haptic interaction in realistic broadcasting system.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.286-301
• /
• 2008

When magnetotelluric (MT) data are obtained in vicinity of the coast, the sea can distort observed MT responses, especially those of deep part of subsurface. We introduce an iterative method to correct the sea effect, based on the previous topographic correction method which removes the distortions due to topographic changes in seafloor MT data. The method first corrects the sea effect in observed MT impedance, and then inverts corrected responses in a model space without the sea. Due to mutual coupling between sea and subsurface structure, the correction and inversion steps are iterated until changes in each result become negligible. The method is validated for 1-D and 2-D structure using synthetic MT data produced by 3-D forward modeling including surrounding seas. In all cases, the method closely recovers the given structure after a few iterations. To test the applicability of the proposed method to field data, we generate synthetic MT data for the Jeju Island whose 1-D conductivity structure is well known, using 3-D forward modeling. The distortions due to the surrounding sea start to appear below the frequency about 1 Hz, and are relatively severe in the electrical field perpendicular to the coastline because of the location of the observation sites. The proposed method successfully eliminates the sea effect after three iterations, and both 1-D and 2-D inversion of corrected responses closely recover the given subsurface structure of the Jeju Island model.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.6
• /
• pp.15-25
• /
• 2011

One dimensional combustion modeling of aluminum combustion behavior is proposed. Combustion model is assumed that region consists as follows ; preheat, reaction, post reaction region. Flame speed as a function of particle size, equivalence ratio for unitary particles and fraction ratio of micro to nano particle size for binary particles were investigated for lean burn condition at 1 atm. Results were compared with experimental data. For unitary particles, flame speed increase as particle size decreases, but opposite trend with equivalence ratio. For binary particles, flame speed increases proportionally as nano particle fraction increases. For flame structure, separated or overlapping flames are observed, depending on the fraction of nano sized particles.

• Journal of the KSME
• /
• v.30 no.4
• /
• pp.322-330
• /
• 1990

2상유동의 물리적 문제는 이상화된 계면형상, 경계 및 초기조건과 연속체공식화를 이용한 지배 및 구속관계에 의해 정립된다. 본 글에서는 2상유동모델의 공식화에 대한 근거와 응용의 제한 성등이 제시되었다. 각 2상유동모델들 사이에는 많은 차이점이 존재하고 이들은 모두 주어진 경우에 적절한 평균화 과정에 의해 유도되었다. 2상유동모델링의 가장 큰 어려움은 구속관계의 개발과 관련되어 있으며 실험적 결과와의 송환과정을 통하여 향상될 수 있을 것이다. 구속 조 건의 개발과 함께 2상유동모델링에 대한 연구는 미시적인 동적해석을 위한 다차원 2-유체모델과 총체적인 계의 거동해석을 위한 1차원 2-유체모델, 혹은 단일유체모델의 분야에서 계속 진행되 어야 할 것이다.