• CORROSION AND PROTECTION
• /
• v.12 no.1
• /
• pp.1-11
• /
• 2013

Alloy 600 재료의 PWSCC의 개념을 소개하고 그 발생과 전파에 미치는 미세조직, 온도, 응력, 수화학 환경등의 주요인자를 정리하였다. ◯ PWSCC란 니켈 기지 합금인 Alloy 600와 그 용접재인 Alloy 82/182 재료가 원자로 1차수 환경에서 보이는 응력부식균열을 의미한다. ◯ Alloy 600의 PWSCC에 미치는 주요 인자에는 재료의 미세조직, 응력, 온도, 환경등이 있으며 그 중에서 재료의 미세조직이 가장 지배적인 인자이다. ◯ 재료내의 탄화물은 탄소 함량과 열처리 조건에 따라 달리 형성되며 입계를 따라 준연속적으로 잘 발달된 입계탄화물을 가지는 재료가 PWSCC에 저항성을 가진다. ◯ 손상속도는 부가 응력의 네 제곱에 비례하여 증가하는 것으로 알려져 있다. ◯ PWSCC는 Arrhenius 관계의 열활성화 과정(thermally activated process)이다. ◯ 용존수소량에 따라 재료의 부식전위가 정해지는데 전극전위가 Ni/NiO 평형전위 부근에서 가장 큰 균열 성장 민감도를 보인다는 데는 연구자들 사이에 이견이 없다. 그러나 균열의 개시에 대한 용존수소량의 영향에 대해서는 이견이 있다.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.265-272
• /
• 2023

The aim of this study was to develop a new in-situ observation method and instrument in micro-scale to investigate the mechanism of stress corrosion cracking (SCC) initiation of Ni-base alloys in a high temperature water environment of pressurized water reactors (PWRs). A laser confocal microscope (LCM), an autoclave with diamond window view port, and a slow strain-rate tester with primary water circulation loop system were components of the instrument. Diamond window, one of the core components of the instrument, was selected based on its optical, chemical, and mechanical properties. LCM was used to observe the specimen in micro-scale, considering the experimental condition of a high-temperature primary water environment. Using in-situ method and instrument, it is possible to observe oxidation and deformation of specimen surface in micro-scale through the diamond window in a high-temperature primary water in real-time. The in-situ method and instrument developed in this work can be utilized to investigate effects of various factors on SCC initiation in a high-temperature water environment.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.83-84
• /
• 2008

The primary water stress corrosion cracking (PWSCC) of dissimilar metal weld based on Alloy 82/182 is one of major issues in material degradation of nuclear components. It is well known that the crack initiation and growth due to PWSCC is influenced by material's susceptibility to PWSCC and distribution of welding residual stress. Therefore, modeling the welding residual stress is of interest in understanding crack formation and growth in dissimilar metal weld. Currently in Korea, a numerical round robin study is undertaken to provide guidance on the welding residual stress analysis of dissimilar metal weld. As a part of this effort, the present paper investigates distribution of welding resisual stress of a ferritic low alloy steel nozzle with dissimilar metal weld using Alloy 82/182. Two-dimensional thermo-mechanical finite element analyses are carried out to simulate multi-pass welding process on the basis of the detailed design and fabrication data. The present results are compared with those from other participants, and more works incorporating physical measurements are going to be performed to quantify the uncertainties relating to modelling assumptions.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.2
• /
• pp.20-27
• /
• 2010

In order to prevent the corrosion of component contacted primary water designed alloy 600 material in the nuclear power plant. But the primary water stress corrosion cracking(PWSCC) of alloy 600 and weld area occurs continuously due to the residual stress. The leakage accident resulted from PWSCC in the drain nozzle of the steam generator of domestic power plants. Heater sleeves of the pressurizer are welded with alloy 600 weld material and therefore exposed to the primary water environment. PWSCC occurred in heater sleeve material and weld area of many foreign power plants. The current issue of domestic nuclear power plants are consequently concentrated to PWSCC of similar material. In order to improve the detection and the sizing of the PWSCC in the welding sleeve of the pressurizer, the automatic UT system and multi-directions probe sets have been developed. The experimental studies have been performed using the mock-up block containing artificial reflectors(ID connected EDM notch) and semi-artificial cracks made from thermal fatigue. The automatic UT System is applied in the detection and the length sizing of the ID/OD on the tube and the J-groove weld area of the artificial reflectors and results of the detection and the sizing are compared respectively. Also, the developed automatic UT system is successfully accomplished to inspect the heater sleeve and the J-groove weld area on the pressurizer for the detection of PWSCC.