• Geomechanics and Engineering
• /
• 제31권4호
• /
• pp.423-437
• /
• 2022

The objective of the study is to evaluate the feasibility of the dynamic behavior of slope through both 1 g shaking table test and numerical analysis. Accelerometers were installed in the slope model with different types of seismic waves. The numerical analysis (ABAQUS and DEEPSOIL) was used to simulate 1 g shaking table test at infinite boundary. Similar Acceleration-time history, Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) were obtained, which verified the feasibility of modeling using ABAQUS and DEEPSOIL under the same size. The influence of the size (1, 2, 5, 10 and 20 times larger than that used in the 1 g shaking table test) of the model used in the numerical analysis were extensively investigated. According to the similitude law, ABAQUS was used to analyze the dynamic behavior of large-scale slope model. The 5% Damping Spectral acceleration (SA) and Spectral acceleration amplification factor (Fa) at the same proportional positions were compared. Based on the comparison of numerical analyses and 1 g shaking table tests, it was found that the 1 g shaking table test result can be utilized to predict the dynamic behavior of the real scale slope through numerical analysis.

• 신재생에너지
• /
• 제4권2호
• /
• pp.87-93
• /
• 2008

Wind tunnel test for the 12% scaled model of NREL Phase VI wind turbine was conducted in KARI low speed wind tunnel for $2006{\sim}2007$. The 1st and 2nd test was designed to find out the wind tunnel test method for the blade manufacturing accuracy and surface treatment method by using the composite and aluminum blades. And the 3rd test was designed to study the scale effect. The chord extension method which was used for Bo-105 40% scaled model was adapted for scale effect correction. Test results shows that the chord extension method works well for the torque slope but the maximum torque for scaled model is about 8% below than the real scale model. New correction method to correct this offset was proposed.

• Structural Engineering and Mechanics
• /
• 제6권5호
• /
• pp.571-582
• /
• 1998

Testing of steel roof purlins is usually performed on full scale models in large vacuum test rigs. To undertake a comparison between web cleat connected purlins and flange bolted purlins a series of tests were performed on a 1:4 small scale model vacuum test rig. Various modelling issues need to be addressed to ensure reasonable comparison with actual constructed roof framing methods but still be suitable for an economical comparison between the connection methods. Model test results were supported by, and found to be in reasonable agreement with, deflection predictions from computer models based on finite element methods. This paper discusses the testing methods adopted and the value of small scale model testing programs as a means of obtaining comparisons between framing options.

• 콘크리트학회지
• /
• 제4권3호
• /
• pp.123-134
• /
• 1992

본연구는 실물크기의 프리캐스트 콘크리트 판구조물의 부분구조체를 모형화하여 실험한 결과를 분석한 것이다. 구조물의 역학적 특성과 파괴성상을 파악하기 위한 구조실험은 실물크기의 구조물과 부재로써 실시하는 것이 가장 좋은 방법이지만, 이것은 치수가 크므로 공간적으로 제한을 받고 많은 시간과 비용을 필요로 하기 때문에 모형실험을 이용하게 된다. 이러한 모형실험을 최소한의 오차범위내에서 원형실험과 같은 재현하고 예측하도록 실험을 준비하는 데에는 상사법칙이 필요하게 된다. 모형은 무엇보다도 원형과의 응력-변형도 관계 등 구성재료에 대한 상사요구조건을 만족시키는 것이 중요하지만, 본 연구의 대상은 1/3축척으로써 기하학적인 요소와 사용재료에 대한 강도의 상사성만을 고려한 모형이다. 본 연구에서는 이러한 모형구조물의 거동을 원형실험결과와 비교하여 상사성 확보의 문제와 가능성을 조사하였다.

• 한국지반공학회논문집
• /
• 제33권1호
• /
• pp.5-15
• /
• 2017

주면마찰력은 매입말뚝에서 가장 큰 영향 요소이다. 특히 시멘트풀과 지반 사이의 인터페이스 거동에 있어 가장 큰 영향을 미친다. 본 연구에서는 시멘트 풀 영향을 고려하여 단독말뚝에 대한 현장축소모형말뚝 재하시험을 수행하였다. 시험말뚝은 상사비를 고려하여 길이 1.3m 지름 0.067m로 선정하였으며, 굴착공경은 150, 125, 90, 86, 74mm, 시멘트풀 물/시멘트비는 90, 70, 60%로 급속재하시험을 수행하였다. 분석 결과 굴착공경이 증가할수록 지지력 증가를 확인하였다. 또한, 물/시멘트비가 부배합일수록 지지력이 증가하는 것을 확인하였다. 상사비를 고려한 축소모형시험결과, 굴착 공경은 말뚝지름(0.508mm 기준)보다 대략 0.1~0.4D(50~200mm) 크게 시공하는 것이 적합하다. 그리고 시멘트풀 물/시멘트비는 본 연구 결과와 품질관리 등을 고려하였을 때, 70% 정도가 적절하다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권1호
• /
• pp.225-229
• /
• 2016

Background: It is important to validate scales related to cancer screening beliefs in order to better understand perceptions. The aim of this study was to test the psychometric properties of the colorectal cancer screening belief scale based on Health Belief Model (HBM) constructs. Materials and Methods: Data were collected from 600 persons referred to outpatient laboratory units in Iran through a convenience sampling procedure. In this cross-sectional study, exploratory and confirmatory factor analyses were used to examine construct validity of scale. Results: Through exploratory factor analysis, 52 items of the scale converged to five constructs of HBM with 4 items omission. Construct validity was determined by confirmatory factor analysis through which correlated model was supported. Cronbach's alpha coefficient for the whole scale was obtained as 0.78, which indicates reliability of the scale. Conclusions: The study findings showed that this scale is a valid and reliable instrument that can be used for measuring HBM constructs about colorectal cancer screening with the fecal occult blood test.

• Journal of Multimedia Information System
• /
• 제8권4호
• /
• pp.203-210
• /
• 2021

Deep leaning convolutional neural networks (CNN) have successfully been applied to image super-resolution (SR). Despite their great performances, SR techniques tend to focus on a certain upscale factor when training a particular model. Algorithms for single model multi-scale networks can easily be constructed if images are upscaled prior to input, but sub-pixel convolution upsampling works differently for each scale factor. Recent SR methods employ multi-scale and multi-path learning as a solution. However, this causes unshared parameters and unbalanced parameter distribution across various scale factors. We present a multi-scale single-path upsample module as a solution by exploiting the advantages of sub-pixel convolution and interpolation algorithms. The proposed model employs sub-pixel convolution for the highest scale factor among the learning upscale factors, and then utilize 1-dimension interpolation, compressing the learned features on the channel axis to match the desired output image size. Experiments are performed for the single-path upsample module, and compared to the multi-path upsample module. Based on the experimental results, the proposed algorithm reduces the upsample module's parameters by 24% and presents slightly to better performance compared to the previous algorithm.

• 방사성폐기물학회지
• /
• 제13권2호
• /
• pp.131-140
• /
• 2015

본 연구에서는 저장볼트(storage vault)의 실험을 위하여 1/4 축소모델 내 튜브의 적정 발열량을 선정하고자 상사해석을 수행하였다. 저장볼트에 대한 열 및 유동 해석을 우선적으로 수행하였고, 크기를 1/4로 축소한 저장볼트에 대하여 동일한 전산해석을 수행하였다. 전산해석 결과를 바탕으로, 제안된 무차원수를 비교하여 원형모델과 온도분포와 유동분포가 유사하게 되는 발열량을 선정하였다. 1/4 축소 저장볼트 내 튜브의 열유속이 1.3배일 때, 원형 저장볼트와 1/4 축소 저장볼트의 온도장 및 유동장이 상사되었다. 이 때, 1/4 축소 저장볼트 내 발열량은 약 190 W이다.

• Wind and Structures
• /
• 제24권4호
• /
• pp.333-350
• /
• 2017

Differing from the fixed-type, the dynamic motion of floating-type offshore wind turbines is very sensitive to wind and wave excitations. Thus, the sensing and monitoring of its motion is important to evaluate the dynamic responses to the external excitation. In this context, a monitoring system for sensing and processing the wind-induced dynamic motion of spar-type floating offshore wind turbine is developed in this study. It is developed by integrating a 1/00 scale model of 2.5MW spar-type floating offshore wind turbine, water basin equipped with the wind generator, sensing and data acquisition systems, real-time CompactRIO controller and monitoring program. The scale model with the upper rotatable blades is installed within the basin by means of three mooring lines, and its translational and rotational motions are detected by 3-axis inclinometer and accelerometers and gyroscope. The detected motion signals are processed using a real-time controller CompactRIO to calculate the acceleration and tilting angle of nacelle and the attitude of floating platform. The developed monitoring system is demonstrated and validated by measuring and evaluating the time histories and trajectories of nacelle and platform motions for three different wind velocities and for eight different fairlead positions.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.401-407
• /
• 1996

A 2-bay 2-story moment-resisting reinforced concrete plane frame with seismic detail was designed. One 1/2.5-scale and one 1/10th model subassemblages were manufactured accoring to the required similitude law. Then the reversed load tests under the displacement control were performed statically to these subassemblages. The results of these tests were compared regarding to the similitude in the characteristics of structural behaviors such as strength., stiffness, energy dissipation, failure modes and local deformations. Based on these results, the following conclussions were drawn : (1) The strength of 1/10 model was very similar to that of 1/2.5 specimen. (2) The initial stiffness of 1/10 model appers to be approximately 2/3 of that of 1/2.5 specimen. (3) 1/10 model has therefore smaller energy dissipation capacity than 1/2.5 specimen. (4) Inelastic excursion mechanisms of 1/2.5 specimen and 1/10 model apper to be a little different.