• Fourth Industrial Review
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2024

Purpose: Education is the part of a fundamental human right across the world. In recent years, the trend of virtual education has increased tremendously. The paper aims to find the impact of adoption, accessibility, interactions, knowledge, and satisfaction on the success of transformation towards virtual education. Research design, data and methodology: Primary data has been gathered through the use of responses from students taking admission in virtual higher education to standardized questionnaires. Of the 250, only 122 were considered complete and have been used in further studies. Convinced random sampling method has been used. The results were evaluated using the Likert Five-Point Scale. For applying these statistical tools software SmartPLS and SPSS 19 have been used. The fitness of the model has been re-checked through an Artificial Neural Network (ANN). Result: Results derived that adoption, accessibility, and interactions have a significant impact on knowledge, knowledge influences satisfaction level and satisfaction have a meaningful impact on the success of transformation towards virtual education. Conclusion: It can be concluded that virtual education has the potential to change the future of the education system and its potential in India. The highest importance is due to satisfaction (100%), adoption (98.7%), knowledge (91.4%), accessibility (62%), and interaction (29.2%).

• The Journal of Fisheries Business Administration
• /
• v.47 no.1
• /
• pp.87-100
• /
• 2016

Suhyup Bank became to be subject to regulation of capital ratio by Basel III which was introduced in order to enhance stability of the financial institution. Accordingly, Suhyup Bank will require recapitalization. It is important to estimate the risk-weighted assets in calculating of Suhyup Bank's recapitalization scale. Therefor, this study aimed to present a scientific model as estimated the risk-weighted assets. Risk-weighted assets are calculated by applying different risk weights for loans, may have a certain relationship with the loans. Results show that the risk-weighted assets is affected by the previous year's risk-weighted assets and influenced the increase in loans during the year. Since the required basic capital adequacy ratio was specified, the risk-weighted assets should be predicted reasonably. Accordingly, on this study it was tried to derive the accounting equation to predict the risk-weighted assets based on management data of a bank since introduction of Basel III. As the risk-weighted assets were weighted differently according to the type of loans, if the accounting equation is derived by using the type of loans, then it would be helpful for the risk management of banks in the long-term. According to this, the increase of loan would be predicted on the basis of past management performance of Suhyup Bank, and for this reason, the future risk-weighted assets of Suhyup Bank were predicted. The result of this study was showed that 98.3% of risk-weighted assets of the previous year, 62.4% of the secured loan changes and 95.1% of the credit loan changes affected risk-weighted assets.

• BMB Reports
• /
• v.42 no.12
• /
• pp.834-839
• /
• 2009

DNA methyltransferase (DNMT) 1 is the key enzyme responsible for DNA methylation, which often occurs in CpG islands located near the regulatory regions of genes and affects transcription of specific genes. In this study, we examined the possible association of DNMT1 polymorphisms with HBV clearance and the risk of hepatocellular carcinoma (HCC). Seven common polymorphic sites were selected by considering their allele frequencies, haplotype-tagging status and LDs for genotyping in larger-scale subjects (n = 1,100). Statistical analysis demonstrated that two intron polymorphisms of DNMT1, +34542G > C and +38565G > T, showed significant association with HBV clearance in a co-dominant model (OR = 1.30, $P^{corr}$ = 0.03) and co- dominant/recessive model (OR = 1.34-1.74, $P^{corr}$ = 0.01-0.03), respectively. These results suggest that two intron polymorphisms of DNMT1, +34542G > C and +38565G > T, might affect HBV clearance.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.6
• /
• pp.1-11
• /
• 2022

Recently, climate change has been regarded as a major cause of large-scale forest fires worldwide, and there is concern that more frequent and severe forest fires will occur due to the level of greenhouse gas emissions. In this study, the daily Keetch and Byram Drought Index (KBDI) of the Baekdudaegan in Chungcheong region including Sobaeksan, Songnisan, and Woraksan National Parks were calculated to assess effect of climate change on the forest fire potential- severity of annual maximum KBDI and frequency of high KBDI days. The present (2000~2019) and future KBDI(2021~2040, 2041~2060, 2081~2090) were calculated based on the meteorological observation and the ensemble regional climate model of the SSP1-2.6 and SSP5-8.5 scenarios with a spatial resolution of 1-km provided by Korea Meteorological Administration(KMA). Under the SSP5-8.5 scenario, 6.5℃ increase and 14% precipitation increase are expected at the end of the 21st century. The severity of maximum daily KBDI increases by 48% (+50mm), and the frequency of high KBDI days (> 100 KBDI) increases more than 100 days, which means the high potential for serious forest fires. The analysis results showed that Songnisan National Park has the highest potential for forest fire risk and will continue to be high in intensity and frequency in the future. It is expected that the forest vulnerability of the Baekdudaegan in the Chungcheong region will greatly increase and the difficulty in preventing and suppressing forest fires will increase as the abundance of combustible materials increases along with climate changes.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.3
• /
• pp.228-239
• /
• 1995

A model experiment on the pair midwater trawl net which is prevailing in Denmark is carried out to get the basic data available for Korean pair bottom trawlers. The model net was made in 1/30 scale considering the Tauti's Similarity law of fishing gear and the dimension of experimental tank. The vertical opening, horizontal opening, towing tension and net working depth of the model net were determined in the tank within the towing velocity 0.46~1.15m/sec, front weight 15.5~62.0g and distance between paired boats 5~8m(which correpond to 2~5k't in towing velocity, 70~280kg in weight and 150~240m in distance respectively in the prototype net). The results got from the model experiment can be converted into the full scale net as follows; 1. Vertical opening showed the largest value of 32m at the condition of 2k't in towing velocity, 280kg in front weight and 150m in the distance between paired boats, and the smallest value of 6m at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats. 2. Horizontal opening showed the largest value of 45m at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats, and the smallest value of 33m at the condition of 2k't in towing velocity, 280kg in front weight and 150m in the distance between paired boats. 3. Towing tension showed the largest value of 10, 000kg at the condition of 5k't in towing velocity, 280kg in front weight and 240m in the distance between paired boats, and the smallest value of 1, 600kg at the condition of 2k't in towing velocity, 70kg in front weight and 150m in the distance between paired boats. 4. Net working depth showed the largest value of 38m at the condition of 2k't in towing velocity, 280kg in front weight and 150m in the distance between paired boats, and the smallest value of 6m at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats. 5. Net opening area showed the largest value of 1, 100m super(2) at the condition of 2k't in towing velocity, 280kg in front weight and 180m in the distance between paired boats, and the smallest value of 250m super(2) at the condition of 5k't in towing velocity, 70kg in front weight and 240m in the distance between paired boats.

• Journal of the Korean Society of Safety
• /
• v.20 no.3 s.71
• /
• pp.71-77
• /
• 2005

This study aims to find the safe vent area to prevent a destruction of building by gas explosion in a building. Explosion vessel which used in this experiment is 1/5 scale down model of simple livingroom and its dimension is 100cm in length 60cm in width and 45cm in height. Liquified petroleum gas(LPG) was injected to the vessel to the concentration of 4.5vol%, and injection rate were varied in 1L/min or 4L/min. Gas mixture was ignited by the 10kV electric spark. For analysis the characteristics of vented explosion pressure according to the vent size and vent shape, its size and shape were varied. From the experiment, it was found that explosion pressure in the vented explosion :in affected by the gas injection rate, vent area and vent shape. And the vent area to volume ratio(S/V) to prevent the building destruction by explosion pressure, it is recommended that the design of vent area happened by the explosion should be above 1/500cm in S/V. And if the vent area has complicate structure in same area, vented explosion pressure will be higher than a single vent, and possibility of building destruction will increase. Therefore to effectively vent the explosion pressure for protect a building and residents from the gas explosion hazards, the same vent area should have a singular and constant shape in the cross-sectional area of the vessel.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.1
• /
• pp.94-100
• /
• 2008

Noise barriers are being used more often to solve problems of noise pollution from traffic noise. Several types of noise barriers are being installed to increase the cost-effectiveness of noise barrier installation. In this study, the insertion loss is analyzed to evaluate the effectiveness of the noise barrier by using the BEM. In order to check the validity of the BEM, the BEM and Lam's theoretical analysis are compared with measurement, which is performed in the anechoic chamber for the 1/10 scale-down model, and good agreements are obtained. By using the two dimensional boundary element method, the insertion loss is calculated and analyzed for several typical noise barriers such as the vertical barrier, the barrier with an oblique edge on top, the T-shaped barrier and the barrier with interference device on top. With these analyses, it is possible to design more cost-effective noise barriers appropriate for a particular area.

• Journal of muscle and joint health
• /
• v.8 no.1
• /
• pp.27-50
• /
• 2001

Rheumatoid arthritis is a chronic systemic autoimmune disease. Although the joints are the major loci of the disease activity, fatigue is a common extraarticular symptom that exists in all gradations of rheumatoid arthritis. Fatigue is defined as a subjective sense of generalized tiredness or exhaustion and has multiple dimensions. Therefore fatigue is a common and frequent problem for those with rheumatoid arthritis. In fact, 88-100% of individuals with rheumatoid arthritis experience fatigue. Especially the degree of fatigue is higher in women than men with rheumatoid arthritis. Despite the importance of fatigue among the patients with rheumatoid arthritis, the mechanism that leads to fatigue in rheumatoid arthritis is not completely understood. This study was intended to test and validate a model to predict fatigue in women with rheumatoid arthritis. Especially it was intended to identify the direct and indirect effects of the variables of pain, disability, depression, sleep disturbance, morning stiffness, and symptom duration to fatigue. Data were collected by questionnaires including Multidimensional Assesment of Fatigue(Tack, 1991), numeric scale of pain, graphic scale of joints, Ritchie Articular Index, Korean Health Assessment Questionnaire(Bae, et al., 1998), Inventory of Function Status(Tulman, et al., 1991), Center for Epidemiologic Studies-Depression, and Korean Sleep Scale(Oh, et al 1998). The sample consisted of 345 women with a mean duration of rheumatoid arthritis for 10.06 years and a mean age of 49.64 years. SPSS win and Win LISREL were used for the data analysis. Structural equation modeling revealed the overall fit of the model. Pain predicted fatigue directly and indirectly through disability, depression, and sleep disturbance. Disability, sleep disturbance predicted fatigue only directly, while depression only indirectly through disability and sleep disturbance. Also morning stiffness and symptom duration predicted fatigue through disability and depression. All predictors accounted for 65% of the variance of fatigue. Depression, pain, and disability predicted sleep disturbance. Depression had reciprocal relationship with disability and they both were predicted by pain directly and indirectly. In summary, pain, depression, disability, sleep disturbance, morning stiffness, and symptom duration contributed to the fatigue of patients with rheumatoid arthritis. The best predictor of fatigue was pain. This finding indicates that the modification of pain, depression, disability, sleep disturbance, morning stiffness could be nursing intervention for relief or prevention of fatigue.

• Korean Journal of Occupational Therapy
• /
• v.26 no.4
• /
• pp.27-41
• /
• 2018

Objective : This study implemented occupation-based practice as a group program for children with neurodevelopmental disabilities, and investigated the quality of occupational performance, performance and satisfaction, and efficacy levels of the program. Methods : ADOC-S(Aid for Decision making in Occupation Choice-School) and COPM(Canadian Occupational Performance Measure) were used to establish common meaningful occupational goals for 10 children with neurodevelopmental disabilities. After occupational analysis of the 'subway use', the Performance Quality Rating Scale(PQRS) were used to evaluate the quality of occupational performance. Occupation-based interventions were implemented by participants individually performing meaningful occupations in the most natural and real-life environments as possible. The trial consisted of 1 session of pre-intervention assessments, 8 sessions of intervention, where a single session of 100 minutes is provided once a week. Post-intervention evaluation was conducted over one session. Results : The quality of occupational performance by PQRS was 38.10 higher than before intervention. The occupation-based intervention as a group program used the maintain and modify(compensation, adaptation) approaches and acquisition model. In the early stages of intervention (1 to 4 sessions), the occupational performance was greatly improved. The performance level of COPM increased by 5.80 and the satisfaction level was increased by 7.00. In addition, high scores were found in program satisfaction through parental interview. Conclusion : The results of implementing occupation-based interventions to children with neurodevelopmental disabilities showed increase in quality of occupational performance, performance, and satisfaction along with positive effects of satisfaction levels for the program.

• Restorative Dentistry and Endodontics
• /
• v.18 no.1
• /
• pp.103-113
• /
• 1993

The purpose of this study was to evaluate the tensile bond strength of composite resin inlays according to the their internal surface treatment and types of luting cement and compared them with the conventional direct resin filling thchnique. Class II cavities were prepared in 50 extracted human molar teeth, and then equally divided into five groups. Group 1 : Cavities of control group were directly filled with P-50. Group 2 : Cavities of resin inlay group were luted with resin cement. Group 3 : Cavities of resin inlay group were luted with luting G-I cement. Group 4 : Cavities of resin inlay group were luted with resin cement after sandblasting. Group 5 : Cavities of resin inlay group were luted with luting G-I cement after sandblasting. All specimens were polished with same method and stored in normal saline for 24 hours before testing. An Universal Testing machine(Model No. AGS-100A, Shimadzu, Japan) was used to apply tensile loads in the vertical direction, and the force required for separation was recorded with a cross-head speed of 5mm/min and 100kg in full scale. The results were as follows : 1. The mean tensile bond strength was lowest in group luted with luting G-I cement, with measurements of $14.45{\pm}0.78(kg/cm^2)$ and highest in group luted with resin cement after sandblasting, with measurements of $49.6{\pm}2.74(kg/cm^2)$. 2. The tensile bond strength was greater in resin inlay groups luted with resin cement than in control group and resin inlay groups luted with luting G-I cement(P<0.05). 3. The tensile bond strength was lower in resin inlay groups luted with luting G-I cement than in control group(P<0.05). 4. The tensile bond strength was greater in resin inlay groups luted with resin cement or luting G-I cement after sandblasting than without that(P<0.05).