• 대한화장품학회지
• /
• 제44권1호
• /
• pp.1-7
• /
• 2018

본 연구에서는 화장품에 널리 쓰이는 컨디셔닝제이면서 항균력을 가지는 성분들인 1,2-hexanediol, ethylhexylglycerin, glyceryl caprylate를 대상으로, 이들이 화장품 제형 내에서 다양한 제형 원료와 혼합될 때 그람 양성, 음성 세균에 대한 항균력이 어떻게 변화하는지 확인하고자 하였다. 검토할 제형 원료로는 제형 내에서 항균력을 향상시킬 것으로 예상되는 물질 7종(1,3-propanediol, 1,3-butanediol, glycerin, dipropylene glycol, niacinamide, EDTA-2Na, ethanol)을 선정하였으며, checkerboard assay를 이용하여 해당 물질들과 항균력을 지닌 3종 물질에 대한 항균 시너지 효과를 확인하였다. 시험 결과, 세균에 대해 눈에 띄는 항균 시너지 효과를 보인 물질은 ethanol과 EDTA-2Na였으며 특히 ethanol은 항균력을 지닌 컨디셔닝제 3종 모두와 세균에 대해 항균 시너지 효과를 나타냄을 확인할 수 있었다. Glyceryl caprylate는 시험한 물질 7종 모두와 그람 양성균인 S. aureus에 대해 항균 부가 및 상승 효과를 나타내었으며, 4종의 폴리올이 첨가된 제형에는 1,2-hexanediol, glyceryl caprylate 조합으로 방부처방을 하는 것이 그람 양성, 음성 세균을 모두 제어하기에 용이하다고 판단되었다. 본 연구는 화장품에서 자주 이용되는 항균력을 지닌 컨디셔닝제와 주요 제형 원료의 항균 시너지 효과를 확인함으로써 항균력을 지닌 컨디셔닝제의 제형 내 항균력을 예측하는 데 기여했다는 점에서 의의가 있다.

• 한국군사과학기술학회지
• /
• 제8권2호
• /
• pp.67-76
• /
• 2005

We synthesized an energetic prepolymer(glycidyl dinitro propyl formal, GDNPF) for plastic-bonded explosive and measured its thermodynamic parameters. Glycidyl dinitro propyl formal(GDNPF) as an energetic monomer was epoxidized from allyl-2,2-dinitro propyl formal which is reacted with dinitro propyl alcohol and excess allyl alcohol, and then energetic polymer of GDNPF was polymerized by cationic ring opening polymerization. Thermodynamic parameters were obtained from the ceiling temperature($T_c$) values of 1 mole monomer at reaction temperature. We varied feed rate of monomer, concentration of initiator and monomer to control molecular weight and polydispersity of prepolymer (GDNPF). The activated monomer polymerization has been executed with precisely controlled feed of GDNPF monomer to reactor in the complex state catalyst generated by $BF_3{\cdot}(C_3H_5)_2$ and 1,4-butanediol in $C_2H_4Cl_2$. Number average molecular weight(Mn), polydispersity(Pd), hydroxy number and glass transition temperature($T_g$) of prepolymer(GDNPF) were $2,500{\sim}3,000,\;1.2{\sim}1,3,\;0.6{\sim}0.8eq/kg\;and\;-20{\sim}-25^{\circ}C$ respectively.

• Elastomers and Composites
• /
• 제27권3호
• /
• pp.161-173
• /
• 1992

A series of polyurethane block copolymers based on hydroxyterminated poly(dimethyl siloxane), poly(propylene glycol) and poly(tetramethylene glycol) soft segments of molecular weights 1,809, 2,000 and 2,000, respectively, were synthesized. The hard segments consisted of 4,4'-diphenylmethane diisocyanate and 1,4-butanediol as the chain extender. Samples with different molar ratios were prepared. We tried to synthesize poly(dimethyl siloxane)-based polyurethane(PDMS-PU) containing a hard block as major fraction and a soft block as minor fraction for preparing toughened rigid systems. After a study of the pure PDMS-PU, poly(propylene glycol)-based polyurethane(PPG-PU) and poly(tetramethylene glycol)-based polyurethane(PTMG-PU), (mixed polyol)-based block copolymers and blends between PDMS-PU, PPG-PU and PTMG-PU were prepared, and characterized by means of differential scanning calorimetry, tensile testing and scanning electron microscopy. In (mixed polyol)-based PU and in lower hard segment content blends, macro-phase separation was shown, but blends with higher hard segment contents showed significant reduction in amounts of phase separation.

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.121-127
• /
• 2023

The effect of diisocyanate type on the decomposition temperature of polyurethane (PU) hydrolysis was investigated in a subcritical water medium up to 250℃. PU samples were prepared using different types of diisocyanate: two aromatic diisocyanates (4,4'-methylene diphenyl diisocyanate (MDI) and methyl phenylene diisocyanate (TDI)), one unbranched aliphatic diisocyanate (hexamethylene diisocyanate (HDI)), and two cyclic aliphatic diisocyanates (4,4'-methylene dicyclohexyl diisocyanate (H₁₂MDI) and isophorone diisocyanate (IPDI)). The pressure had no effect on hydrolysis in the range of 70-250 bar. The decomposition temperature of the PU samples increased in the following order: TDI-PU (199℃) < H₁₂MDI ≈ IPDI ≈ HDI (218-220℃) < MDI-PU (237℃). This order of increase in temperature is related to the electron-donating ability of the group to connected to the nitrogen of the urethane unit. When the temperature of the (PU + water) mixture reached the specific decomposition temperature, the PU samples hydrolyzed completely within 5 min into primary amine and 1,4-butanediol. The hydrolysis products from MDI-PU and H₁₂MDI-PU were separated into a liquid phase rich in (BD + water) and a solid low phase rich in amine, whereas the products from TDI-, IPDI-, and HDI-PU existed in a single aqueous phase.

• 한국식품과학회지
• /
• 제39권4호
• /
• pp.360-365
• /
• 2007

간장 중 3-MCPD 분석을 위한 HFBI, PBA, BSTFA 및 MBTFA를 사용한 유도체화 방법 및 시료 정제를 위한 흡착제, 용출용매 및 Surrogate, 내부표준물질 등을 검증한 결과 MBTFA를 이용한 acylation 방법을 제외한 나머지 세가지 유도체화 방법 모두 0.01 mg/kg 이하의 검출한계를 확인하였으며 정량한계(검출한계 ${\times}$3배)를 고려하더라도 현재의 국내 0.3 mg/kg 기준을 분석하는데 문제가 없는 것으로 판단되었으나 유럽의 허용치 0.02 mg/kg을 분석하기 위해서는 PBA방법이나 BSTFA를 사용한 유도체화 방법의 경우 최종 시료액을 약 5배 이상 농축할 필요가 있다. 한편, 유도체화를 위한 반응조건으로 가열시간 및 온도는 HFBI와 BSTFA를 사용하는 경우 $70^{\circ}C$에서 각각 30 및 60분 그리고 PBA는 첨가 직후부터 가열 없이 반응이 완결되는 것으로 나타났다. 흡착제는 Extrelut20 혹은 Florisil 이 가장 적합한 것으로 확인되었으며, 흡착제로부터의 3-MCPD 용출용매로는 ethyl acetate가 상대적으로 높은 추출능을 보여 주었다. 또한 고가의 3-MCPD 중수 소치환 동위원소 surrogate 물질을 대체하기 위한 surrogate 표준물질로는 1,2-butanediol이 그리고 내부표준물질로는 1,2-dibromo-3-chloropropane이 가장 적합한 것으로 확인하였다.

• 한국응용과학기술학회지
• /
• 제17권4호
• /
• pp.240-247
• /
• 2000

Two-component polyurethane flame-retardant coatings were prepared by blending trichloro aromatic modified polyesters(TCMPs) and polyisocyanate. TCMPs were synthesized by polycondensation of trichlorobenzoic acid(TCBA), a flame-retardant component, with adipic acid, 1,4-butanediol, and trimethylolpropane. The content of TCBA was varied in 10, 20, and 30 wt% for the reaction. These new flame-retardant coatings showed various properties comparable to other non-flame-retardant coatings. Moreover, we carried out the combustion test and the flammability test for our flame-retardant coatings. The results of vertical burning test for the coatings containing more than 20 wt% of TCBA were determined as 'no burn'. The results of flammability test for the coatings with 20 wt% and 30 wt% of TCBA contents indicated the limiting oxygen index(LOI) values of 25% and 28% respectively, which implied relatively good flame retardancy.

• 공업화학
• /
• 제10권5호
• /
• pp.639-643
• /
• 1999

동시중합방법으로 에폭시수지와 castor oil형 폴리우레탄수지로 상호침투고분자(IPNs)를 형성하였다. 사슬연장제인 1,4-butanediol (BD)가 가교제인 BD/trimethylolpropane(TMP)에 따라 두 종류의 폴리우레탄(PU)을 제조했다. PU가 증가함에 따라, BD를 사슬연장제로 사용한 PU/epoxy가 BD/TMP를 가교제로 사용한 PU/epoxy SINs보다 damping피크의 이동이 컸다. BDPU/epoxy SINs는 BD/TMP-PU/epoxy SINs에 비해 사용성이 좋았다. 이러한 두 구조에서, 사슬연장제와 가교제에 따라 PU/epoxy SINs의 특이한 netwok 형성이 상혼합의 정도를 변화시켰음을 가정하였다. PU의 사슬연장제의 종류가 IPNs의 상혼합을 결정하는 중요한 인자였다. BD/TMP-PU의 반응이 에폭시수지의 가교반응보다 빠를 때, 가교구조의 entanglement가 감소하여 상혼합정도가 감소하였다. 두 PU/epoxy SINs는 굴곡특성과 파괴인성이 증가하였다. BDPU/epoxy SINs와 BD/TMP-PU/epoxy SINs의 파괴단면에서 PU의 공동화에 의한 응력백화현상과 전단변형을 보였다.

• 공업화학
• /
• 제8권6호
• /
• pp.920-926
• /
• 1997

촉매 글리콜분해공정은 에스테르 교환반응에 의해 생성된 폴리올과 carbamate 화합물을 회수하여 폴리우레탄 폼 제조에 이용하는 화학적 재활용 방법이다. 본 연구에서는 폴리우레탄 폼을 분해하기 위해 ethyleneglycol, diethyleneglycol, 1,4-butanediol을 사용하였으며, 촉매로는 금속 acetate류를 사용하였다. 촉매글리콜분해 반응온도는 $180{\sim}200^{\circ}C$ 범위에서 수행되었다. 반응속도는 반응시간 경과에 따른 생성물의 점도를 측정하여 조사하였으며, IR과 GPC분석을 통하여 분해 생성물의 종류와 분자량 분포를 조사하였다. 촉매 글리콜분해는 높은 온도에서 ethyleneglycol을 사용했을 때 잘되었다. K, Na, Tl acetate 촉매의 활성이 좋았으며, 생성물들은 비교적 높은 함량의 아민화합물과 carbamate화합물을 함유하고 있었다. Sr acetate와 Quinoline 촉매의 경우 반응은 다소 느리지만 폴리올의 함량이 높았고 부생성물의 함량이 낮았다. 회수폴리올을 20wt%까지 첨가하여 제조한 폴리우레탄 폼의 물성이 버진 폴리올만을 사용하여 제조한 폼에 비해 인장강도, 경도, 인열강도, 압축강도 등이 좋았다.

• 대한화학회지
• /
• 제61권6호
• /
• pp.346-351
• /
• 2017

This study was planned considering the chain length, hydrophilicity, and hydrophobicity of the additives to be used in the polymerization, while various ophthalmic lenses that use various additives with similar water contents were manufactured before their optical and physical properties were compared and analyzed. With regard to the additives required for manufacturing high-, medium-, and low-water content lens groups, HEA (hydroxyethyl acrylate), PVP (polyvinylpyrrolidone), and NMV(N-methyl-N-vinylacetamide) were used as additives for preparing the high-water content lens group, HEMA(2-hydroxyethyl methacrylate), HPMA(hydroxypropyl methacrylate) and BD(1,4-butanediol) were used for the medium-water content lens group. For the low-water content lens group, BMA(buthyl methacrylate), BDDA(1,4-butanediol diacrylate), and Bis-GMA(bisphenol A glycerolate diacrylate) were used, respectively. The average water content of HEA was 40.14%; that of PVP, 39.63%; and that of NMV, 40.52%. The mean of water content was 35.92% for HEMA, 35.74% for BD, and 34.62% for HPMA. For the low-water content lens group, the mean of water content was 26.69% for BMA, 27.76% for BDDA, and 26.14% for Bis-GMA. With regard to the results of the water content measurement using a moisture analyzer, the average water content of the high-water content lens group was 41.34% for HEA, 42.62% for PVP, and 42.73% for NMV. Finally, for the low-water content lens group, the average water content was 28.62% for BMA, 28.82% for BDDA, and 28.32% for Bis-GMA. The measurements of the water contents of the lenses using the two methods showed that the water content and refractive index of the lenses were similar in all the lens groups. The measurements of the contact angles, however, showed a different wettability value for each lens with a similar water content. Also, the change tendency of the lens curvature according to the change of time showed that the change amount became larger and the recovery time became longer from the lens samples with a lower water content to those with a higher water content. Based on these results that will be helpful for the study of ophthalmic lenses.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.2988-2996
• /
• 2011

Shape memory polyurethane (SMPU), grafted with a fluorescent dye (Rhodamine, Mehylene violet, or Fluorescein) through an allophanate linking, was tested for the fluorescence and the shape recovery effect. The main chain of SMPU was composed of 4,4'-methylenebis(phenylisocyanate) (MDI), poly(tetramethyleneglycol) (PTMG), and 1,4-butanediol (BD), and a fluorescent dye was connected through a second MDI linked to the carbamate moiety of the main chain. Three series of SMPU, differing according to their dye content, were prepared to compare their shape recovery and fluorescence properties. In tensile mechanical property, maximum stress increased up to 350% compared to the linear SMPU, and strain remained above 2000%. Shape recovery went to as high as 97%, and remained almost same after repetitive shape recovery test cycles. Finally, the fluorescence emission of SMPU was demonstrated in the luminescence spectrum and fluorescent light emission pictures. In addition, the response of SMPU to external stimuli such as metal ions was investigated.