• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2004년도 International Conference Current Challenges and Advances in Environmental Health
• /
• pp.72-72
• /
• 2004

• 한국환경보건학회지
• /
• 제30권4호
• /
• pp.301-307
• /
• 2004

1,3-butadiene(DB) is a well-established rodent carcinogen, and a probable carcinogen to humans. This study was investigated the formation of hemoglobin adduct in ICR female mice inhaled with BD for 3 weeks (5 hr/day, 5 days/week). Body weights of mice were significantly low from onward day 4 or 9 of exposure comparing the control. Hemoglobin adducts formed by DB exposure were (N-2-hydroxy-3-butenyl) valine (HB Val adduct) and (N-2,3,4-trihydroxy-butyl)valine(THB Val adduct). The levels of HB Val adducts were 1.8, 3.7 and 6.2 pmol/mg globin for the 500 ppm BD inhalation group, and 5.7, 7.4 and 16.0 pmol/mg globin for the 1000 ppm BD inhalation group, when observed on the $1^{st},\;2^{nd},\;and\;3^{rd}$ week after inhalation exposure, respectively. The levels of THBVal adducts were 32.0, 42.0 and 55.0 pmol/mg globin for the 500 ppm DB inhalation group, and 67.8, 72.7 and 83.5 pmol/mg globin for the 1000 ppm BD inhalation group, when observed on the $1^{st},\;2^{nd},\;and\;3^{rd}$ week after inhalation exposure, respectively. Ratios of THBVal and HBVal adducts were higher at earlier exposure period and lower concentration. Ratios on the $1^{st},\;2^{nd},\;and\;3^{rd}$ week were 17.8, 11.4 and 8.87 for the 500 ppm BD inhalation group, and 11.9, 9.8 and 5.2 for the 1000 ppm BD inhalation group, respectively. In conclusion, THB Val and HB Val adducts were the important hemoglobin adducts in ICR female mice inhaled with BD, and the latter was more appropriate biomarker than the other for biological monitoring of BD exposure.

• 한국분무공학회지
• /
• 제20권4호
• /
• pp.207-216
• /
• 2015

Recently, the researches for air pollutant control technologies have been performing in Korea, while considering an one of the latest main topics as problems on air pollutant control. However, it is difficult to investigate emission amount of air pollutant by passenger cars, because of lack of the domestic information about mobile source; the number of research institutes are less in the whole. Especially, the informations on registered numbers and emissions of motorcycles are less. Thus, in this study, the analysis that is based on experimental results was conducted for finding out source profiling and emission characteristics on motorcycles exhaust. For these experiments, the domestic motorcycles were chosen and evaluated by EURO III standard. From the result, controlled pollutants (CO, HC, NOx) were met to EURO III, but low displacement motorcycles showed a higher incomplete combustion reaction than that of 250 cc motorcycles. Additionally, uncontrolled pollutants (BTEX and 1,3-butadiene) were decreased with increasing a displacement of motorcycles. However, the emission trend of aldehydes was not followed that of those; the formaldehyde ratio increased upto approximately 33%, with increasing a displacement of motorcycles. In the future, it would be used to support the CAPSS as basic data of Korea.

• 폴리머
• /
• 제31권1호
• /
• pp.8-13
• /
• 2007

나일론 6/poly(acrylonitrile-co-butadiene-co--styrene) (ABS) 블렌드의 단점을 해결하기 위해 ABS의 고무상인 폴리부타디엔 대신 폴리(부틸 아크릴레이트)를 고무상으로 포함하고 있는 poly(acrylonitrile-co-styrene-co-acrylic rubber) (ASA)를 사용하여 새로운 나일론/ASA 블렌드를 실험하였다. 고충격성을 갖는 블렌드 제조를 위하여 상용화제로 무수 말레산을 25 wt% 포함한 poly(styrene-co-maleic anhydride) (SMA)와 이를 3 wt% 이하 포함한 poly(styrene-co-acrylonitrile-co-maleic anhydride) (SANMA)를 사용하여 블렌드를 제조하였다. 나일론/ASA 블렌드에서 상용화제의 함량에 따른 물성 변화는 나일론/ABS 블렌드와 유사한 경향을 나타내었다. 블렌드 내의 고무 함량이 20 wt% 이상일 때 안정된 물성의 고충격 블렌드가 제조되었다. 블렌드를 사출 성형 온도에서 사출 성형기 내에 체류시킨 후 제조한 시편의 충격 강도를 시험한 결과 SMA를 상용화제로 사용한 경우 충격 강도의 감소가 관찰된 반면 SANMA를 상용화제로 사용한 블렌드에서는 충격 강도의 변화가 거의 없었다.

• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.394-402
• /
• 2013

티타늄화합물과 티타늄부톡사이드를 각각 디아민과 결합시켜 새로운 구조의 중합촉매를 개발하였으며, 이들은 부타디엔의 삼중고리화를 통한 싸이클로도데카트리엔(CDT)의 합성반응에 대해 높은 촉매활성을 나타내었다. CDT합성반응은 고압식 액상반응기를 사용한 배취형 반응계에서 수행하였으며, 반응온도, 촉매의 종류, 촉매량, Al/Ti의 몰비 및 고정화방법 등이 생성물 CDT의 생성수율에 미치는 영향을 관찰하였다. 디아민과 4염화티타늄을 1:1로 결합시킨 촉매는 생성물 CDT에 대하여 90% 이상의 높은 선택성을 보였다. 생성된 CDT 중의 TTT/TTC 입체이성체비는 티타늄에 결합된 디아민의 종류와 Ti/디아민의 비율 등에 따라 달라졌다. 이들 균일계 착체는 담체상에 고정화시켜 사용할 수 있었으며, 티타늄 주촉매는 반응 중 추출되지 않고 활성을 유지하면서 여러 번 사용이 가능하였다. 실리카 담체보다는 탄소담체를 사용하여 티타늄화합물을 고정한 촉매가 보다 높은 활성을 보였으며, 특히 아미노실란 만을 중합시켜 제조한 담체에 티타늄을 결합시키면 BD의 전환율도 높고 CDT에 대한 선택도도 높게 나타났다.

• Elastomers and Composites
• /
• 제35권1호
• /
• pp.38-45
• /
• 2000

NR, SBR, BR 둥 3가지 고무로 이루어진 가류물에서 고무 조성비가 노화방지제의 이동 거동에 미치는 영향에 대해 연구하였다. 3가지 고무 중 2가지의 함량은 동일하게 하였고 나머지 하나만 다르게 하였다. IPPD와 HPPD를 오존노화방지제로 사용하였다. 실험은 $60^{\circ}C$에서 21일간 방치하는 것과 옥외에서 4개월간 방치하는 것으로 진행하였다. 노화방지제의 이동 속도는 고무 조성비가 NR/SBR/BR = 1/1/0.2에서 1/1/1로 증가함에 따라 증가하다가 1/1/1에서 최대를 나타내 후 다시 감소하였다. 3가지 고무로 이루어진 가류물에서 고무 조성비에 따른 노화방지제의 이동 거동의 변화는 고무와 노화방지제 간의 친화력, 고무에 대한 노화방지제의 융해도, 그리고 이질 고무간에 형성된 경계면 등으로 설명할 수 있었다.

• Elastomers and Composites
• /
• 제22권2호
• /
• pp.109-120
• /
• 1987

In this study, as one of the developing ways of the functional elastomer, improvement of the functionality of CB-BR was attemped through stabilization. At first the stabilization effect of CB-BR and the concentration dependancy in CB-BR were determined. Then, triazine thiol derivative(BPTT) was synthesized by reacting p-aminodiphenylamine with cyanuric chloride. Further the functional mechanism and the effects of the antioxidants were investigated using BPTT together with other various antioxidants in liquid and solid states. The results obtained are as follows: 1) The aging of CB-BR depended on the concentration and temperature. Thus, at a low temperature of $50^{\circ}C$, the aging proceeded with gel formation; at high temperature above $100^{\circ}C$ and in above 4wt% concentration, the aging occured by the formation of gel. And in concentrations below that, the aging proceeds with a decomposition caused by oxygen attacked to elastomer molecules. 2) The effect of antioxidation of CB-BR in the liquid state was at it's best when the MBIZ and BPTT were used at $110^{\circ}C$, 4hrs after the oxidation. 3) The effect of antioxidation of CB-BR in the solid state was the best choice the simultaneous use of NDBC and BPTT at $50^{\circ}C$, 30days after the oxidation.

• 대한화학회지
• /
• 제13권4호
• /
• pp.333-339
• /
• 1969

Synthesis and chemical properties of 1,4-bisdiazo-2-butene have been studied. 1,4-Bisdiazo-2-butene which was very unstable produced in protic solvents 1,3-butadiene and one unidentified substance instead of ring compounds. The reaction in aprotic solvents remains for further investigations.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.52-59
• /
• 2019

Styrene-butadiene rubber (SBR) composites, incorporated with graphene, molybdenum disulfide and their hybrid in different filling ratio, were fabricated by a two roll-mill. The dispersion states of all the samples' matrix were employed by carbon black dispersion tester. The curing properties of the pre-vulcanized rubber composites were investigated, after molding by heating press machine, the tensile strength, storage modulus, friction coefficient, the swelling property had also been tested according to ASTM. The composite G1M10 (filling with 1 phr graphene and 10 phr molybdenum) showed the best mechanical properties and viscoelastic properties in this research with a better filler dispersion state and more compact matrix structure.

• 한국환경보건학회지
• /
• 제44권2호
• /
• pp.160-168
• /
• 2018

Objectives: The purposes of the study were to investigate hazardous pollutant emissions changes among group 1 carcinogens. The emissions characteristics were compared with national cancer registration statistics. Methods: A survey of group 1 carcinogen hazardous pollutant emissions (trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, ethylene oxide, chromium and its compounds, 3,3'-dichloro-4,4-diaminodiphenylmethane, chloromethyl methyl ether, arsenic and its compounds, cadmium and its compounds, o-toluidine) was conducted through a homepage for 2001-2015. The emission of hazardous chemicals and the cancer trend analysis for 2001-2015 were performed using the Korean statistical information service through its homepage as a reference. Results: Emissions of more than 95% of the substances listed as group 1 carcinogens over the last five years were made up of trichloroethylene, benzene, vinyl chloride, formaldehyde, 1,3-butadiene, and ethylene oxide. As a result of the comparison of emission results and cancer incidence rates, carcinogen pollutant emissions showed a tendency to decrease continuously. In addition, the incidence of cancer tended to increase, but showed a tendency to decrease from 2012. Conclusion: The results indicate hazardous pollutant emissions have continued to increase. However, no association between emissions and health effects was shown and more research is needed.