• Journal of Microbiology and Biotechnology
• /
• v.16 no.2
• /
• pp.264-271
• /
• 2006

Two fibrinolytic enzymes were purified from the culture supernatant of Fomitella fraxinea mycelia by ion-exchange and gel filtration chromatographies, and were designated as F. fraxenia proteases 1 and 2 (FFP1 and FFP2). The apparent molecular masses of the enzymes were estimated to be 32 kDa and 42 kDa, respectively, by SDS-PAGE and gel filtration chromatography. Both enzymes had the same optimal temperature ($40^{\circ}C$), but different pH optima (10.0 and 5.0 for FFP1 and FFP2, respectively). FFP1 was relatively stable at pH 7.0-9.0 and temperature below $30^{\circ}C$, whereas FFP2 was very stable in the pH range of 4-11 and temperature below $40^{\circ}C$. FFPI activity was completely inhibited by phenylmethylsulfonyl fluoride (PMSF) and aprotinin, indicating that this enzyme is a serine protease. The activity of FFP2 was enhanced by the addition of $CO^{2+}$ and $Zn^{2+}$ and inhibited by $Cu^{2+},\;Ni^{2+}$, and $Hg^{2+}$. Furthermore, FFP2 activity was strongly inhibited by EDTA and 1,10-phenanthroline, implying that the enzyme is a metalloprotease. Both enzymes readily hydrolyzed fibrinogen, preferentially digesting the $A{\alpha}$- and $B{\beta}$-chains of fibrinogen over ${\gamma}$-chain. FFP1 showed broad substrate specificity for synthetic substrates, but FFP2 did not. $K_{m}$ and $V_{max}$ values of FFP1 for a synthetic substrate, N-succinyl-Ala-Ala-Pro-Phe-pNA, were 0.213 mM and 39.68 units/ml, respectively. The first 15 amino acids of the N-terminal sequences of both enzymes were APXXPXGPWGPQRIS and ARPP(G)VDGQ(R,I)SK(L)ETLPE, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.7
• /
• pp.1881-1886
• /
• 2010

Hydrothermal reaction of zinc(II) salts with 5-sulfoisophthalic acid monosodium salt ($NaO_3SC_6H_3$-1,3-(COOH)$_2$, $NaH_2$-SIP) and 1,10-phenanthroline (phen) led to two new compounds, [Zn(phen)$_3$$\cdot2H_2SIP\cdot4H_2O$ (1) and [Zn(phen)$_2(H_2O)_2]\cdot2H_2SIP\cdot2H_2O$ (2). They were characterized by element analysis, IR spectroscopy, thermalgravimetric analysis (TGA), X-ray powder diffraction (XRD), and single-crystal X-ray diffraction. Both compounds 1-2 represent the first example of Zn/phen/SIP system. The Zn (II) ion in 1 is six-coordinated by six nitrogen atoms from three phen molecules, and the $H_2SIP^-$ ligands engage in the formation of hydrogen bond. The Zn(II) ion in 2 is coordinated by four nitrogen atoms from two phen molecules and two oxygen atoms from two water molecules. Moreover, both 1 and 2 are assembled into 3D supramolecular architectures by hydrogen bonds (O-H$\ldots$O) and $\pi-\pi$ interactions. Solvent water molecules occupying voids of the compounds serve as receptors or donors of the extensive O-H$\ldots$O hydrogen bonds.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.1259-1263
• /
• 2012

Two metal compounds, $[Co(phen)_2(H_2O)_2]{\cdot}2H_2SIP{\cdot}2H_2O$ 1 and $[Ni(phen)_3]{\cdot}2H_2SIP{\cdot}3H_2O$ 2, have been obtained by incorporating 1,10-phenanthroline (phen) and 5-sulfoisophthalic acid monosodium salt ($NaH_2SIP$) ligands under hydrothermal conditions. Meanwhile, the two compounds were characterized by element analysis, IR, XRD, TG-DTA and single-crystal X-ray diffraction. Both 1 and 2 present 3D supramolecular structures via O-H${\cdots}$O hydrogen bond interactions. Luminescent properties for 1 and 2 were also studied. The compound 1 has two fluorescence emission peaks centered at 398 nm attributed to the intraligand emission from the SIP ligand and at 438 nm assigned to the combined interaction of intraligand ${\pi}^*-{\pi}$ transitions of the phen ligand and ligand-to-metal-charge-transfer (LMCT) transitions (${\lambda}_{ex}$ = 233 nm). The compound 2 shows one emission band centered at 423 nm with a shoulder peak at 434 nm which may be originated from the intraligand ${\pi}^*-{\pi}$ transitions of the phen ligand (${\lambda}_{ex}$ = 266 nm).

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.1
• /
• pp.24-28
• /
• 2009

본 논문에서는 청색 인광 발광 물질인 bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium (III) (Flrpic)과 녹색 인광 발광 물질인 fac-tris(2-phenypyridine) irdium(III) ($Ir(ppy)_3$)와 적색 인광 발광 물질인 his(5-benzoyl-2-phenylpyridinato-C,N)iridium(III) (acetylacetonate) ($(Bzppy)_{2}Ir(acac)$)를 각각 적층하여 백색 유기 발광 다이오드를 제작하였고, 각각의 발광층 사이에 혼합된 스페이서인 4,4'-N,N'-dicarbazole-biphenyl (CBP):4,7-diphenyl-1,10-phenanthroline (BPhen)을 적층하여 그 때의 영향에 대하여 연구하였다. 최적화된 구조에서의 전력 효율은 $0.014\;mA/cm^2$에서의 19.7 lm/w를 나타내었으며, $0.127\;mA/cm^2$에서의 11.5%의 외부 양자 효율을 나타내었고, 8 V에서 Commission Internationale do I'Eclairage ($CIE_{x,y}$) coordinates (x=0.36, y=0.44)의 색좌표를 나타내었다.

• BMB Reports
• /
• v.38 no.1
• /
• pp.104-110
• /
• 2005

We extended the measurable time scale of DNA dynamics to microsecond using $[Ru(phen)_2(dppz)]^{2+}$ (phen = 1,10-phenanthroline, dppz = dipyrido[3,2-a:2',3'-c]phenazine) (RuPD), which displays a mean lifetime near 500 ns. To evaluate the usefulness of this luminophore (RuPD) for probing nucleic acid dynamics, its intensity and anisotropy decays when intercalated into supercoiled and linear pBluescript (pBS) II SK(+) phagemids were examined using frequency-domain fluorometry with a blue light-emitting diode (LED) as the modulated light source. The mean lifetime for the supercoiled phagemids (< $\tau$ > = 489.7 ns) was somewhat shorter than that for the linear phagemids (< $\tau$ > = 506.4 ns), suggesting a more efficient shielding from water by the linear phagemids. The anisotropy decay data also showed somewhat shorter slow rotational correlation times for supercoiled phagemids (997.2 ns) than for the linear phagemids (1175.6 ns). The slow and fast rotational correlation times appear to be consistent with the bending and torsional motions of the phagemids, respectively. These results indicate that RuPD can have applications in studies of both bending and torsional dynamics of nucleic acids.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.311-312
• /
• 2010

The fabricated photovoltaic cells based on PIN heterojunctions, in this study, have a structure of ITO/poly(3, 4-ethylenedioxythiophene)-poly(styrenesulfonate)(PEDOT:PSS)/donor/donor:C60(10nm)/C60(35nm)/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline(8nm)/Al(100nm). The thicknesses of an active layer(donor:C60), an electron transport layer(C60), and hole/exciton blocking layer(BCP) were fixed in the organic photovoltaic cells. We investigated the performance characteristics of the PIN organic photovoltaic cells with copper phthalocyanine(CuPc), tetracene and pentacene as a hole transport layer. Discussion on the photovoltaic cells with CuPc, tetracene and pentacene as a hole transport layer is focussed on the dependency of the power conversion efficiency on the deposition rate and thickness of hole transport layer. The device performance characteristics are elucidated from open-circuit-voltage(Voc), short-circuit-current(Jsc), fill factor(FF), and power conversion efficiency($\eta$). As the deposition rate of donor is reduced, the power conversion efficiency is enhanced by increased short-circuit-current(Jsc). The CuPc-based PIN photovoltaic cell has the limited dependency of power conversion efficiency on the thickness of hole transport layer because of relatively short exciton diffusion length. The photovoltaic cell using tetracene as a hole transport layer, which has relatively long diffusion length, has low efficiency. The maximum power conversion efficiencies of CuPc, tetracene, and pentacene-based photovoltaic cells with optimized deposition rate and thickness of hole transport layer have been achieved to 1.63%, 1.33% and 2.15%, respectively. The photovoltaic cell using pentacene as a hole transport layer showed the highest efficiency because of dramatically enhanced Jsc due to long diffusion length and strong thickness dependence.

• Korean Journal of Microbiology
• /
• v.30 no.4
• /
• pp.305-309
• /
• 1992

Cytosine deaminase (EC 3.5.4.1) from BaciNus stc~urorhermophilus was partially purified 7.2-fold with an overall yield of 52.7%. The partially purified enzyme deiiminated cytosine only.but not 5-methylcytosine and 5-fluorocytosine. The apparent Michaclis constant. Km valuefor cytosine was 5.9 mM. The enzyme was relatively stable in the range of pH 4.0 to 7.0.furthermore extremely thermo-stable : more than 75'X) of the activity was remained afterheating at 80$^{\circ}$C for I0 min at pH 6.5. The enzyme had a pH optimum at around pH7.0 to 7.5. and temperature optimum at 35 to 31$^{\circ}$C. And the activation energ (En value)determined from an Arrhenius plot was 26 Kcal/mol. The enzyme activity was stronglyinhibited by heavy metal ions such as Cd", Hg". Cut' at 1 mM, anJ by o-phenanthroline,and p-chloromcrcuribcnzoate at I mM. But the enrymc activity was activatetl increased byGMP, and CMP at 1 mM.ased by GMP, and CMP at 1 mM.

• Korean Journal of Materials Research
• /
• v.7 no.10
• /
• pp.856-862
• /
• 1997

박막형 CdTe/CdS 태양전지의 배면전극(back contacts)물질로서 Cu도핑된 ZnTe 박막(ZnTe:Cu)을 전착법(electroplating)으로 제조하는 연구를 수행하였다. Sulfate계의 전해질 수용액에서 CdTe 기판과 투명전극으로 코팅된 유리(In$_{2}$O$_{3}$: Sn, ITO)기판 위에 ZnTe 박막을 코팅하는 방법으로써 potentiostat와 기판(cathode), Pt counter electrode, Ag/AgCI 표준전극으로 구성된 장치를 사용하여 pH=2.5-4, T=70-8$0^{\circ}C$, 0.02M $Zn^{2+}$ 1x$10^{-4}$M TeO$_{2}$, 0.2M $K_{2}$SO$_{4}$조건에서 -0.800 Vs~-0.975 V 범위의 전압(V$_{a}$ )에 걸쳐 실험하였다. ITO박막을 기판으로 사용하여 cyclic voltammogram을 작성한 결과 약 -0.50 V 에서 Te환원 peak이 나타났다. Auger electron spectroscopy (AES)로 조성분석한 결과 표면에서 Zn signal이 강하게 나왔고 시편의 두께에 따라 Zn의 signal감소하는 반면 Cd signal은 증가하는 것이 확인되었다. SEM 사진으로부터 ZnTe의 표면이 작은 입자 (0.2$\mu\textrm{m}$ 이하)로 구성되어 있으며 낮은 V$_{a}$ 에서는 입자가 작아지면서 조직이 치밀해짐이 관찰되었다. Optical transmission방법에 의하여 ITO기판위에 입혀진 박막의 밴드갭은 2.5 eV으로 측정되었다. 수용액중의 Cu$_{2+}$와 triethanolamine(TEA)은 산성용액에서 착물형성이 이루어지지 않았으며 1,10-phenanthroline과는 pH=2에서도 착물이 형성되었다.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.2
• /
• pp.173-178
• /
• 1999

The extracellular cytosine deaminase (EC 3.5.4.1) from Chromobacterium violaceum YK 391 was purified 264.7-fold with an overall yield of 14.3%. The enzyme was for the first time homogeneous by the criteria of polyacrylamide gel electrophoresis performed in the absence and in the presence of sodium dodecyl sulfate. The molecular weight of the purified enzyme was estimated to be about 156 kDa. The enzyme consisted of two identical subunits of approximate molecular weight 78 kDa. The isoelectric point of the enzyme was pH 5.55. The enzyme had a pH optimum of 7.5 and a temperature optimum of around 40 to $45^{\circ}C$. Besides cytosine, the enzyme deaminated 5-fluorocytosine, cytidine, 5-methylcytosine, and 6-azacytosine, but not 5-azacytosine. The extracellular cytosine deaminase is believed to be unique because it was active not only on cytosine but also on cytidine. The apparent $K_m$ values for cytosine, 5-fluorocytosine, cytidine, and 5-methylcytosine were determined to be 1.55 mM, 5.52 mM, 10.4 mM, and 67.2 mM, respectively. The enzyme activity was strongly inhibited by heavy metal ions such as $Fe^{2+},Pb^{2+},Cd^{2+},Zn^{2+}, Hg^{2+}, and Cu^{2+}$ at 1 mM, and completely by $\alpha,\alpha$'-dipyridyl, and $\rho$-chloromercuribenzoate at 1 mM, and weakly inhibited by 1mM ο-phenanthroline. The enzyme activity was not affected by various nucleosides and nucleotides.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.109-109
• /
• 2018

Bacillus subtilis B22, a chemotrophic and aerobic bacterial strain was isolated from homemade kimchi, identified by 16S rRNA gene sequencing. B22 was primarily screened by biochemical, carbon source utilization tests. B22 was used to produce pectinase and ${\beta}$-glucosidase by submerged fermentation under different light sources. B22 was incubated in pectin media and basal media (pH 7.0) under blue, green, red and white light-emitting diodes (LEDs), fluorescent white light, and in darkness at $37^{\circ}C$, orbital shaker 150 rpm for 24 hours. Fermentation under blue LEDs maximized pectinase production ($71.59{\pm}1.6U/mL$ at 24 h) and ${\beta}$-glucosidase production ($56.31{\pm}1.6U/mL$ at 24 h). Further, the production of enzyme increased to pectinase ($156{\pm}1.28U/mL$) and ${\beta}$-glucosidase ($172{\pm}1.28U/mL$) with 3% glucose as a carbon source. Activity and stability of the partially purified enzymes were higher at pH 6.0 to 8.0 and $25-55^{\circ}C$. The effect on the metal ions $Na^+$ and $K^+$ and (moderateactivity) $Mn^{2+}$ and $Ni^{2+}$ increased activity, while $Hg^{2+}$, $Cu^{2+}$, $Fe^{2+}$, and $Fe^{2+}$ inhibited activity. EDTA, phenylmethylsulfonyl fluoride and 5,5-dithiobis (2-nitrobenzoicacid) reduced activity, while tetrafluoroethylene and 1,10-phenanthroline inhibited activity. The amylase was highly tolerant of the surfactants TritonX-100, Tween-20, Tween-80 and compatible with organic solvents methanol, ethanol, isoamylalcohol, isopropanol, t-butylalcohol and the oxidizing agents hydrogen peroxide, sodium perborate and sodium hypochlorite, although potassium iodide and ammonium persulfate reduced activity. These properties suggest utility of pectinase and ${\beta}$-glucosidase produced by B. subtilis B22 under blue LED-mediated fermentation for industrial applications.