• Journal of the Korean Statistical Society
• /
• v.30 no.1
• /
• pp.115-125
• /
• 2001

We consider the threshold autoregressive moving average(TARMA) process and find a sufficient condition for strict stationarity of the proces. Given region for stationarity of TARMA(p,q) model is the same as that of TAR(p) model given by Chan and Tong(1985), which shows that the moving average part of TARMA(p,q) process does not affect the stationarity of the process. We find also a sufficient condition for the existence of kth moments(k$\geq$1) of the process with respect to the stationary distribution.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.1
• /
• pp.23-30
• /
• 2018

Many practitioners in educational field, recently, are seeking to improve Computational Thinking through SW education. The purpose of this paper was, for promotion of SW education, to design the STEAM education process utilizing 3D printer. The project-based education process emphasized the cooperation in the process of producing common results and proposed a new STEAM education process. The designed products are expected to be used in the elementary school classes by linking with the camp and teacher training programs and the curriculum.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.1
• /
• pp.44-52
• /
• 2006

Bio-filtration processes using honeycomb tubes (process 1) and aeration and manganese-sand filtration (process 2) were evaluated for the biological manganese removal efficiency. The concentration of manganese at effluent was stabilized after 20days operation in process 1. It was estimated the required time for attaching and growing microorganisms to honeycomb tubes. In long term of operation periods, manganese removal efficiency was dropped for the excessively attached biofilm and manganese dioxide to honeycomb tubes. It took several days for normal operation in process 2, after that manganese removal efficiency was increased to 98% and stabilized for 1.5 years. Microorganisms in process 1 and 2 were isolated and cultured to characterize manganese-oxidizing bacteria. Among the four types of colony, light brown colony was turned blue color by leuco crystal violet spot test. Stenotropomonas genus, known as manganese-oxidizing bacteria, was identified by 16S rDNA partial sequencing analysis which was isolated in process 1 and 2. For the biological treatment to remove manganese, these two considerations are important. One is to choose the proper media attaching manganese oxidant, another one is to define the cultural condition of isolated manganese-oxidizing bacteria.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.112-118
• /
• 2001

The aim of this study was to evaluate on the removal effect of total nitrogen and phosphorus in municipal wastewater with temperature change from 1$0^{\circ}C$ to 24$^{\circ}C$ in CNR(Cilia Nutrient Removal) process. CNR process is the process combining $A^2$/O process with cilium media of H2L company. The removal efficiencies for T-N were found to be 57.9% at 1$0^{\circ}C$ below, 53.7% at 10-2$0^{\circ}C$, 52.2%at 20-24$^{\circ}C$ and 44.4% over 24$^{\circ}C$ respectively. The removal efficiencies for T-P were 53.3% at 1$0^{\circ}C$ below, 59.1% at 10-2$0^{\circ}C$, 72.4% at 20-24$^{\circ}C$ and 50.0% over 24$^{\circ}C$ respectively. The specific nitrification rate (kg NH$_3$-N/kg MLSS.d) of Oxic basin was 0.088 and 0.053 at 1$0^{\circ}C$ below, 0.077 at 10-2$0^{\circ}C$, 0.097 at 20-24$^{\circ}C$ and 0.088 over 24$^{\circ}C$ respectively. The specific denitrification rate (kg NH$_3$-N/kg MLSS.d) in anaerobic and anoxic was 0.013, 0.008 respectively.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.390-398
• /
• 1999

The thermomechanical control process(in hot rolling strip mill) was employed to produce 2.25Cr-1Mo steel, which is to be construction material for the steam generator for power plant. Although the Conventional processes has been the primary means of producing the 2.25Cr-1Mo steel, an alternative method was used to meet the specification of ASTM heat treatment for A387-22-Classl using autotempering after coiling in hot rolling strip mill. The microstructures, tensile properties at various temperatures, and creep-rupture properties have been investigated to compare the properties with those of materials produced by the conventional process and to certify the application of the thermomechanical control process to an actual process of manufacturing 2.25-Cr-1Mo steel, this in turn, will reduce the cost of the process. About 14 to 34% glanular bainite (remainder proetectoid ferrite) formed in a coil, and this variety of volume fraction stems from the different cooling rates, which varies with position of the coil after coiling. Tensile testing from room temperature to 700$^{\circ}C$ indicated that strength increases with test temperature showing peaks at around 600$^{\circ}C$. Creep-rupture properties have been being investigated at the temperature of 500$^{\circ}C$ with 27.5, 32kg/$\textrm{mm}^2$ loads and have showed no rupture for over 1000 hours.

• Transactions of Materials Processing
• /
• v.27 no.3
• /
• pp.154-159
• /
• 2018

In the rectangular bar multi-stage drawing process, the cross-section dimensional accuracy of the rectangular bar varies depending on the aspect ratio and process conditions. It is very important to predict the dimensional error of the cross-section occurring in the multi-stage drawing process according to the aspect ratio of the rectangular bar and the half die angle of each pass. In this study, a process map for improving the dimensional accuracy according to the aspect ratio was derived in the drawing process of a rectangular bar. FE-simulation of the multi-stage shape drawing process was carried out with four types of rectangular bar. The results of the FE-simulation were trained to the nonlinear relationship between the shape parameters using an Artificial Neural Network (ANN), and the process maps were derived from them. The optimum half die angles were determined from the process maps on the dimensional accuracy. The validity of the suggested process map for aspect ratios 1.25~2:1 were verified through FE-simulation and experimentation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.169-172
• /
• 2004

The effect of the process parameters on the stable lifetime in rapid thermal firing(RTF) was investigated in order to optimize the process for the Cz-silicon. The process temperature was varied between $700^{\circ}C\;and\;950^{\circ}C$ while the process time was chosen 1 s and 10 s. At below $850^{\circ}C$ the stable lifetime for 10 s is higher than that for 1 s and increases with increasing by the process temperature. However, at over $850^{\circ}C$ the improved stable lifetime is not dependent on the process time and temperature. On the other hand, two high temperature processes in solar cell fabrics are combined with the optimized process and the non-optimized process. The last process determines the stable lifetime. Also, the degraded stable lifetime could be increased by processing in optimized process. The decreased lifetime can increase using the optimized oxidation process, which is a final process in solar cells. Finally, the optimized and non-optimized processes are applied solar cells.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.1
• /
• pp.47-57
• /
• 2010

There have been many problems to apply SPC(Statistical Process Control) which is a traditional process control technology to the process of multi-product, small-sized production because a machine in the process manufactures small numbers, but various kinds of products. Therefore, we need the new process control system that can flexibly control the process by setting up the SPEC rules and the KNOWHOW rules. The SPEC rule contains the combination of diverse conditions to specify the characteristics of various products. The KNOWHOW rule is based on engineers' know-how. The study suggests the Rule-base Process Control that can be optimized to the multi-product, small-sized production. It was validated in the process of semiconductor production.

• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.61-67
• /
• 2007

Our life totally depends on activated sludgeprocess for treatment of wastewater: sewage and industrial wastewater. Activated sludge process was the epoch-making technology in Environmental field. One century has been almost passed since the process was developed in England, and the process is still on the development of improvement. Here, history of activated sludge process, its mechanismsof treating the wastewater, expectations that we had on the process in the past, and future image and possibility on the process were presented. By reviewing the events related to the process, we can foresee potentials for new possibility of activated sludge process.

• Journal of Korean Academy of Nursing Administration
• /
• v.10 no.1
• /
• pp.141-159
• /
• 2004

Purpose: The purpose of this study was to investigate the degree of information technology application, and to identify the effect of information technology application en knowledge management process in clinical nurses. Method: Participants were 629 regular clinical nurses who had worked for over 1 year in general units of 9 tertiary medical hospitals including 2 national university hospitals, 5 university hospitals, and 2 hospitals founded by business enterprises. Data were collected from March to May 2003 through questionnaires. Thee structured instruments were used to collect the data: Information Technology Application scale, Knowledge Management Process Scale(Jeong, Lee, Lee, & Kim, 2003), and one for general characteristics. The data were analyzed using reliability analysis, descriptive analysis, one-way ANOVA, $Scheff{\acute{e}$ test, correlation analysis, partial correlation analysis, and multiple regression analysis with the SPSS for Windows 10,0 program. Result: 1) The HIS application degree, IT application ability, and IT application frequency were significantly correlated with the degree of knowledge management process activation and 4 elements of knowledge management process, Knowledge Creation, Knowledge Storage, Knowledge Sharing, and Knowledge Utilization(p=.000). 2) The 3 variables, HIS application degree, IT application ability, and IT application frequency explained 47.2% of the total variance of the degree of knowledge management process activation, and 352% of me total variance of Knowledge Storage. And 2 variables, HIS application degree and IT application frequency explained 17.6% of the total variance of Knowledge Creation, 39.9% of the total variance of Knowledge sharing, and 33.8% of the total variance of Knowledge utilization(p=.000). 3) As a result of multiple regression analysis, the key determinant of the degree of knowledge management process activation for nurses was HIS application degree The HIS application degree, IT application frequency, position, IT application ability, and continuous total numbers of years working at the present hospital explained 51.1% of the total variance of the degree of knowledge management process activation(p=.000). Conclusions: These results suggest that the information technology application positively affects the nurses' knowledge management process. From the above findings, information technology application is empirically verified as a useful and effective method to activate knowledge management process, and knowledge management.