• Journal of Institute of Convergence Technology
• /
• v.7 no.1
• /
• pp.19-22
• /
• 2017

SI process is one of the most advanced thermochemical water splitting cycles enabling mass production of hydrogen without emitting carbon dioxide when coupled to nuclear heat energy. The highest temperature (close to $1000^{\circ}C$) required in SI process is well matched with the outlet temperature of a coolant circulating a high-temperature gas-cooled reactor at around $950^{\circ}C$. In Section 3, some heat exchangers are included to recover heats from process flows at high temperature. In this work, we designed a heat exchanger based on the $1Nm^3/hr$ $H_2$ production capacity using commercial tools for chemical process design.

• Korean journal of food and cookery science
• /
• v.10 no.2
• /
• pp.138-141
• /
• 1994

Whole, peeled sweetpotatoes were subjected to four different processes: 15 min microwave heating followed by 15 min baking (1), 90 min baking (2), 15 min microwave heating (3), and 15 min boiling followed by 15 min microwave heating (4). Samples of green and cured roots were used in the study. Scanning electron photomicrographs revealed that cured roots contained larger numbers of starch granules in the parenchyma cells than green roots, most of them compounded. The starch in cooked green roots was gelatinized while for cured roots it was mostly hydrolyzed into dextrins and sugars. Starch in process (3) roots was mostly gelatinized while in process (1) and process (2) roots gelatinized starch appeared in little quantity, thus it was primarily converted to dextrins and sugars. The process (4) resulted in little conversion of starch. The process (1) product resulted in a similar product to the process (2) product.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.1
• /
• pp.1-8
• /
• 2017

Warpage is a major defect frequently found in the injection molding process, and the reduction of warpage is a very challenging problem because of the uncontrollable factors, such as variations in the process parameters. Without any countermeasure against these noises, attempts to reduce the defects often lead to failure. In this research, a new robust design methodology, based on the Mahalanobis Taguchi System (MTS) to reduce warpage, is presented. The MTS performs the orthogonal array experiments and uses the signal-to-noise (SN) ratio of the Mahalanobis distance as a performance metric. The validity of the proposed method is illustrated through an optimal design of the injection molding process of a CPU base plate.

• Journal of the Korean Society of Earth Science Education
• /
• v.6 no.1
• /
• pp.78-86
• /
• 2013

The purpose of this study is to analyze the effects of the Project based STEAM program on primary students' Problem solving process and creative personality. Based on the concept of project based learning and STEAM derived from a literature review, a learning program has been developed and applied to 28 elementary 4-6th students. Problem Solving Process and Creative personality tests were conducted before and after Project based STEAM program lessons. The results of this study are as follows. (1)Project-based STEAM was affected all components of problem solving process. (2) Project-based STEAM was affected all eight components of creative personality positively, (3) after using Project-based STEAM was good reaction by students. As a result, the elementary science class with Project-based STEAM had problem solving process for positive educational effect and creative personality. it means the science class with creative personality has potential possibilities and value to develop problem solving process and creative personality.

• Journal of Korean Society on Water Environment
• /
• v.20 no.6
• /
• pp.610-614
• /
• 2004

The objective of this study was to remove organics and color in livestock wastewater using coagulation and Fenton oxidation process. After coagulation process as $1^{st}$ treatment, organics in $1^{st}$ treatment water were removed by using OH radical produced in Fenton oxidation process. Removal efficiencies of $COD_{Mn}$ and color were 87.2% and 95.7% separately. At that time, the ratio of $Fe^{2+}/H_2O_2$ was 0.8~1.0, and range of reaction pH was effective at the pH of 3.5~3.8. The Reaction time of 120min more than 60min or 90min was sufficient in Fenton process. Removal efficiency of organics was higher two- or multi-stage treatment than one-stage treatment.

• Membrane and Water Treatment
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2013

The process of electromembrane transformation of L-lysine monohydrochlorides into their zwitterionic form in four- and two-chamber electrodialysis apparatus was investigated. The process of transformation at various concentrations of lysine monohydrochloride (0.1-0.6 mol.L-1) was studied and it was established that at the optimum density of current optimal concentrations of lysine hydrochloride during electrodyalisis was in the range of 0.2-0.4 mol.L-1. It was determined that the process of total transformation was accomplished when pH of the lysine solution achieved 10. Changes of concentrations of $Cl^-$ ions and lysine diffused into the neighboring chamber were determined depending on the time. The method developed by us allows adjusting the removal coefficient of $Cl^-$ ions during transformation to a maximal value, the losses of lysine diffused into the next chamber after its return to the technological cycle being less than 1.0 %. The specific energy consumption during the process of transformation in two- and four-chamber electrodialyzers was 0.19 and 0.205 A.h.kg-1 and the current efficiency was 75.9 and 73.1 %, correspondingly. Study of the process of electromembrane transformation allowed obtaining zwitterionic form of L-lysine from L-lysine monohydrochloride with minimal reagent and energy consumption.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.597-606
• /
• 2012

To increase the productivity and product quality of customized baseball jerseys, this study developed a multi-variable system for a production process that efficiently controls diverse production management factors. The working time was measured through the establishment of a standard process where skilled workers and Chinese factory workers manufactured 5 sets of the same basic design jerseys. Based on the measured working time (1,136 seconds/per unit), the multi-variable process control system was developed, where hourly production management is possible according to the involved workers and equipment types. Each process was assigned accoding to the production management factors for a total of 28 standard processes. The processes were developed based on consideration of work characteristics according to the order of needlework of open-type set baseball jerseys with sleeves(the basic design of baseball jerseys)to result in a customized production system structure that could be set up with multi-variables. As a result, a total 12 types of systems were developed in consideration of the personnel involved and the number of equipments. The optimal production management system (with the highest efficiency compared to the number of workers)was A-2, B-1, C-1. D-2, E-2, F-1, and G-1. This system had extremely high efficiency and showed 99% assignment efficiency for the 7-person team. Though not optimal, possible process assignment for each working personnel is proposed as a reserve process in case work modification is inevitable due to malfunctions and the absence of equipments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.1
• /
• pp.97-103
• /
• 2009

The process design of forward Extrusion and Upsetting of Axi-symmetric part has been studied in this paper. During the cold forging product; auto transmission Solenoid Valve part, the defects such as folding and under-fill can be appeared by the improperly controlled metal flow. In this study, to reduce the folding and under-fill the design of experiments has been used to find out the significant design variables in the design of forging process. This paper deals with an Process Planning with which designer can determine operation sequences even after only a little experience in Process Planning of Multi-Former products by multi-stage former working. The approach is based on knowledge-based rules, and a process knowledge-base consisting of design rules is built. Based on the systematic procedure of process sequence design, the forming operation of cold forged auto transmission Solenoid Valve part is analyzed by the commercial Finite Element program, DEFORM/2D.

• Textile Coloration and Finishing
• /
• v.18 no.3 s.88
• /
• pp.16-22
• /
• 2006

Process contract has received considerable attention in silk degumming processes because of its critical role in quality assurance. In degumming, process exhibits shrinkage of high twisted yarn and lot-varying behavior, thus increasing the difficulties of reduction by conventional means. This necessitates the application of a package that adapts to changing degumming process, and a new approach involving package degumming is proposed. The gains of this process are prevent of shrinkage by package winding, which is simplified by reduced soft-winding or re-twisting process. The approach is expected to achieve high quality results in conventional process due to its feature of demage by tension and rubbing. Therefore package degumming has many merits such as reduce of pilling and shrinkage, production expenses saving by process contract are expected of the simplified degumming process.

• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.285-289
• /
• 2015

Complicated and expensive seawater desalination technology is a big challenge in boron removal process. Conventional seawater desalination process of coagulation utilized for pre-treatment is difficult to remove boron. Boron can be removed more effectively in Reverse Osmosis (RO) process than any other processes. In this study, a coagulant with the name Mineral Cluster was examined its boron removal ability. Boron removal efficiency of Mineral Cluster depended on pH value and Mineral Cluster dosage. Desalination process combines the pre-treatment process with Mineral cluster diluted at the ratio of 1:2500 and the RO membrane process. The original sea water could be desalinated to drinking water quality, 1 mg/L, without any pH adjustments. Therefore, if the Mineral cluster is added without any other chemicals for adjusting pH, the desalination process would be much safer, efficient and economical.