• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.5
• /
• pp.862-870
• /
• 2002

The purpose of this study is to verify the relation between vegetarian diet and the risk factors of cardiovascular disease. The subjects of the study were 127 Buddhist nuns (age:23～79y) from Oonmoon Temple in Choungdo District Gyeongsang Bookdoo Province and 118 Buddhist nuns practicing Zen meditation at Soodeok Temple in Yeosan District Chongcheong namdoo Province. For control subjects, 235 healthy female adults (age:23～79y) were selected. They were the teachers, the nurses of the hospital of Gyeongsang National university and the housekeepers living in chinju Gyeongsang Namdoo Province. The period of this study was from October 1996 to February 1997. The contents were consisted of food consumption survey, anthropometric measurement, estimating amount of energy expenditure, physical activity and clinical examination. Results were summarized as follows: The mean ages of the subjects were 44.2y for vegetarians and 40.5y for non-vegetarians, respectively. average body mass index (BMI) of vegetarians and non-vegetarians were 22.47 adn 21.08, WHR 0.85 and 0.84, percentage of body fat 28.79 and 26.55 respectively. The average duration of vegetarian diet of the vegetarians was 13.16 years. Levels of total cholesterol, LDL-cholesterol, atherogenic index (AI), diastolic blood pressure, blood sugar and HDL-cholesterol of non-vegetarians were significantly higher (p<0.01) than those of vegetarians, but ration of HDLcholesterol/total-cholesterol was lower in non-vegetarians. In both of subjects, BMI, WHR, RBW, %BF had sig-nificant positive correlations with triglyceride, total cholesterol, LDL-cholesterol and AI. BMI, WHR had sig-nificant positive correlation with systolic blood pressure. BMI, WHR had significant negative correlation with HDL-cholesterol. In summary, vegetable diet can contribute to lowering serum lipid level, atherogenic index (AI),systolic blood pressure, blood sugar.

• Journal of Periodontal and Implant Science
• /
• v.32 no.2
• /
• pp.379-388
• /
• 2002

For the success of dental implant, accurate radiographic evaluation is prerequisite for planning the location of the osseointegrated implants and avoiding injury to vital structures. CT/MPR(computed tomography/multiplanar reformation) shows improved visualization of inferior alveolar canal. In order to obtain cross-sectional images parallel to the teeth, the occlusal plane is used to orientate for the axial plane. If the direction of axial plane is not parallel to the occlusal plane, the reformatted cross-sectional scans will be oblique to the planned fixture direction and will not show the actual dimension of the planned fixture's location. If the available bone height which measured in the cross-sectional view is much greater than the actual available bone height, penetration of canal may occur. The aim of this study is to assess the effect of the axial plane to measurement of available bone height for dental implant in computed tomography of the mandible. 40 patients who had made radiographic stents and had taken CT were selected. The sites that were included in the study were 45 molar regions. In the central panoramic scan, the length from alveolar crest to superior border of inferior alveolar canal(available bone height, ABH) was measured in direction of reformatted cross-sectional plane(uncorrected ABH). Then, length from alveolar crest to superior border of canal was measured in direction of stent(corrected ABH). The angle between uncorrected ABH and corrected ABH was measured. From each ABH, available fixture length was decided by $Br{{\aa}}nemark$ system. The results were following ; the difference between two ABHs was statistically significant in both first and second molar(p< 0.01). The percentage of difference more than 1 mm was 8.7% in first molar and 15.5% in second molar. The percentage of difference more than 2 mm was 2.0% in first molar and 6.6% in second molar. The maximum value of difference was 2.5 mm in first molar and 2.2 mm in second molar. The correlations between difference of 2 ABHs and angle was positive correlations in both first and second molar. The correlation coefficient was 0.534 in first molar and 0.728 in second molar. The second molar has a stronger positive correlation. The percentage of disagreement between 2 fixture lengths from two ABHs was 24.4% in first molar and 28.9% in second molar.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.203-211
• /
• 2001

This study was carried out to determine sex of porcine embryos produced by in vitro fertilization. Porcine oocyte-cumulus complexes were cultured in BSA-free North Carolina State University (NCSU) 23 medium containing porcine follicular fluid (10%), cystein (0.1 mg/ml) and hormonal supplement (10 IU eCG and 10 IU hCG per ml) for 20~22 hrs. They were then cultured in the same medium but without hormonal supplement for additional 20~22 hrs. After culture, cumulus cells were removed and oocytes were co-incubated for 6 hrs with four different concentrations (5$\times$10$^4$, 2.5$\times$ 10$^{5}$ , 5.0$\times$10$^{5}$ and l0$\times$10$^{5}$ ) of porcine sperm. After fertilization, oocytes were transferred into NCSU 23 with 0.4% BSA medium. The cleavage and blastocyst formation rates were evaluated at 48 and 144 hrs, respectively. In this study, the polymerase chain reaction (PCR) was used to determine the sex of porcine embryos in the stage of blastocyst. The PCR was performed using a set of oligonucleotide primers (5‘-TCATGGACCAGGTAGGGAAT-3', 5’-GAAAGACACGTCCTTGGA GA-3') for 491 bp fragment of porcine male-specific DNA sequence. In the flour different sperm concentration (5$\times$10$^4$, 2.5$\times$10$^{5}$ , 5.0$\times$10$^{5}$ and l0$\times$10$^{5}$ ) for fertilization condition, the cleavage rate was 55.95, 67.88, 60.18 and 47.60%, respectivety, and the development rate of blastocysts was 16.03, 20.40, 21.41 and 12.37%, respectively. At 5.0$\times$10$^4$and 2.5$\times$10$^{5}$ of sperm concentrations per ml cleavage rate and development rate of blastocyst were higher than those of 5.0$\times$10$^4$and l0$\times$10$^{5}$ of sperm concentration (P<0.01). The male of porcine embryos was detected at 491 bp by PCR, and 18 of the 31 porcine blastocysts were the male (58.1%) and the rest 13 were the female(41.9%).

• Journal of Nutrition and Health
• /
• v.40 no.7
• /
• pp.593-600
• /
• 2007

Recent studies described the ${\varepsilon}4$ allele of apoE confers a two-to fourfold increased risk for late-onset Alzheimer#s disease (LOAD), but LOAD pathology does not all fit neatly around apo E. Therefore, the goal of this study was to find the association between Alzheimer and apo E4 genotype in the 107 elderly between 50 to 64 years old who visited to FHWC of Sungshin Women#s University. We conducted the questionnaire survey (general & 24 hr dietary recall), anthropometerics (BP, waist & BMI) and blood biochemistry (FBS & lipid profiles). LDL-c and HOMA-IR were calculated by Friedwald#s and Matthew#s formulas. The apo E genotyping was performed by PCR-RFLP method and subjects were divided into three allele groups (${\varepsilon}3$; wild, ${\varepsilon}2$ & ${\varepsilon}4;$ mutants). The apo E allele frequencies were 7.0% for the ${\varepsilon}2$, 83.6% for the ${\varepsilon}3$ and 9.3% for the ${\varepsilon}4$. In comparison with biochemistry characteristics by apo E genotype, FBS was significantly higher in ${\varepsilon}4(129.2{\pm}6.8)$ than that in the others (${\varepsilon}2$: $117{\pm}7.4$, ${\varepsilon}3$: $107.3{\pm}2.2)$ (p<0.01). More than forty percents of ${\varepsilon}4$ group shown the dyslipidemia [high TG (>150mg/dl) & low HDL (<40 mg/dl:male or <50 mg/dl: female)]. The cytokines levels such as IL-1 ${\beta}$, IL-6 and $TNF-{\alpha}$ were not different among three apoE alleles. After the adjusting sex, age & dietary fiber, LDL-c level was siginificantly higher in ${\varepsilon}4$ ($108.3{\pm}7.7$) than that in ${\varepsilon}2$ ($100.4{\pm}8.4$) (p<0.05). According to food intake and the recipe on the basis of 24 hr dietary recall, the elder]y with ${\varepsilon}4$ allele took higher intake frequency of the light -colored vegetable (radish, onion & cabbage) and pan-fried foods (sauteed beef and vegetables, stir-fried vienna with vegetables) than the others. We knew that the elderly with ${\varepsilon}4$ allele had been restricted the calories intakes with high dietary fiber (33.6+2.5 g/d) to maintain the normal level of FBS and LDL-c. On next study, the prevalence of Alzheimer#s disease in this population who has ${\varepsilon}4$ allele on the condition of calories restriction will be continually follow-up.

• The Korean Journal of Pesticide Science
• /
• v.20 no.2
• /
• pp.93-103
• /
• 2016

A simultaneous analytical method was developed for the determination of isoxaflutole and metabolite (diketonitrile) in agricultural commodities. Samples were extracted with 0.1% acetic acid in water/acetonitrile (2/8, v/v) and partitioned with dichloromethane to remove the interference obtained from sample extracts, adjusting pH to 2 by 1 N hydrochloric acid. The analytes were quantified and confirmed via liquid chromatograph-tandem mass spectrometer (LC-MS/MS) in positive-ion mode using multiple reaction monitoring (MRM). Matrix matched calibration curves were linear over the calibration ranges ($0.02-2.0{\mu}g/mL$) for all the analytes into blank extract with $r^2$ > 0.997. For validation purposes, recovery studies were carried out at three different concentration levels (LOQ, 10LOQ, and 50LOQ) performing five replicates at each level. The recoveries were ranged between 72.9 to 107.3%, with relative standard deviations (RSDs) less than 10% for all analytes. All values were consistent with the criteria ranges requested in the Codex guideline (CAC/GL40, 2003). Furthermore, inter-laboratory study was conducted to validate the method. The proposed analytical method was accurate, effective, and sensitive for isoxaflutole and diketonitrile determination in agricultural commodities.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.101-106
• /
• 2009

Purpose of this study is to compare the signal intensity (SI) and CNR with T1 weighted image using FLASH at 3T abdominal MRI by varying flip angle (FA). Totally 20 patients (male : 12, female : 8, Age : $28{\sim}63$ years with mean : 51) were examined by 3 Tesla MR scanner (Magnetom Tim Trio, SIEMENS, Germany) with 8 channel body array coil between september and October 2008. Imaging parameters were as follows : FLASH sequence, TR : 120 ms, TE : minimum, FOV (field of view) : $360{\times}300\;mm$, Matrix : $256{\times}224$, slice : 6 mm, scan time : 15 sec and Breath-hold technique. Abdominal image, with a 50 ml syringe filled with water placed in the FOV measuring the water signal, were acquired with varying FA through $10^{\circ}$ to $90^{\circ}$ with $10^{\circ}$ interval. SI's were measured three times at liver parenchyme, water, spleen and background and averaged. The CNR's were measured between the ROIs (region of interest). Statistic analysis was performed with ANOVA test using SPSS software (version 17.0). Less than FA $30^{\circ}$, abdominal images were severely inhomogeneity. Especially, T1 effect of water signal was weak. As the flip angle increased, the signal intensity decreased at all the regions. Especially, flip angle of the highest signal intensity was observed with $40^{\circ}$ at the liver parenchyme, $20^{\circ}$ at water, $30^{\circ}$ at the spleen, respectively. The CNR between liver and water was -60.92 at FA $10^{\circ}$ and 15.16 at FA $80^{\circ}$. The CNR between liver and spleen was -3.18 at FA $10^{\circ}$ and 9.65 at $80^{\circ}$. In conclusion, FA $80^{\circ}$ is optimal for T1 weighted effect using FLASH pulse sequence at 3.0 T abdominal MRI.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.1
• /
• pp.1-6
• /
• 2011

This study was conducted to evaluate the antioxidant activity of liquid beni-koji (LBK), 70% ethanol extracts of beni-koji (EEB) and water extract of Hwangki (WEH). The yields of freeze dried powder of LBK, EEB and WEH were 32.17 g/L, 23.61 g/kg and 196.33 g/kg, respectively. Electron donating ability at 1% (w/v) of LBK, EEB and WEH were 82.67%, 15.71% and 8.60%; reducing power (OD700) were 2.06, 1.64 and 0.45, respectively. SOD-like activities were 24.32%, 11.11%, and 17.94%; nitrite scavenging activities were 74.92%, 72.31% and 31.83%, respectively. TBARS (%) were in order of LBK (69.65%)> EEB (67.32%)> WEH (4.42%). Electron donating ability at 1% (w/v) of EEB : WEH (1:1, w/w. EW), LBK : WEH (1:1, w/w. LW), EEB : LBK: WEH (1:1:1, w/w. ELW) were 14.58%, 60.66% and 20.42%; reducing power ($OD_{700}$) were 1.06, 2.01 and 1.71; SOD-like activities were 18.50%, 26.94% and 18.25%, respectively. While nitrite scavenging activities and TBARS (%) of ELW was higher than those of other materials. Total polyphenol content of LBK, EEB, WEH, EW, LW, ELW were 3.98%, 3.61%, 3.02%, 3.23%, 3.46% and 3.38%; total flavonoid content were 0.89%, 3.91%, 0.30%, 2.59%, 0.46% and 2.33%, respectively. In conclusion, this study provides experimental evidence that mixture of LBK, EEB and WEH could be used as a source of antioxidant ingredients in the food industry.

• Journal of Aquaculture
• /
• v.20 no.2
• /
• pp.96-105
• /
• 2007

A pair of maroon clownfishes with an indonesian native, reared in recirculation culture system to develope its aquaculture techniques. Courtship, spawning behavior, egg developments and rearing of the maroon clownfish larvae were documented. The larval development were described with illustrative figures. The spawning was occurred 8 times between Feburary and August 2004. The gravid female spawned during 15:00-20:00. The male mainly took care of the eggs supplying oxygen by water currents using their pectoral fins, anal fin and mouth. The fertilized eggs were separative-adhesive and oval in shape, and $1.99{\pm}0.03\;mm$ in longer diameter and $0.88{\pm}0.03\;mm$ in shorter diameter. The fertilized eggs were in deep-orange color. Cleavage occurred in 30 minutes after fertilization, and the egg reached 2 cells stage in 1 hour 10 minutes after fertilization at $27.0^{\circ}{\pm}0.5^{\circ}C$. The embryo was formed in 23 hours 40 minutes after fertilization. Hatching began in between $120{\pm}2$ hours and $150{\pm}12$ hours after fertilization at $27.0^{\circ}C$ in the incubator. Total length (TL) of the newly hatched larvae was 3.22 mm with mouth and anus opened. Ten days after hatching, mean TL of the larvae were 6.21 mm with 28 dorsal fin rays, 17 anal fin rays and 28 caudal fin rays. Nineteen days after hatching, mean TL of the larvae were 9.34 mm. At this stage the larva had three white bands on the body, and they began to feed on commercial diet.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.424-429
• /
• 2015

The aim of this study was to investigate whether peripheral or central administration of triptolide is involved in pain modulation in inflammatory orofacial pain. The inflammatory orofacial pain was induced by the injection of 5% formalin into right vibrissa pad of rats. The pain behavioral response was measured the number of grooming or scratching on the orofacial area for 9 successive 5 minutes intervals. Triptolide was administrated into the identified vibrissa pad (12.5, 25, $50{\mu}g/50{\mu}l$) or intracisternal space (0.01, 0.1, $1{\mu}g/10{\mu}l$) 10 min before formalin injection. The nociceptive responses were reduced in the 2nd phase (11~45 minutes), particularly 20, 30 minutes after fomalin injection following administration of triptolide into vibrissa pad (25, $50{\mu}g/50{\mu}l$). Intracisternal ($1{\mu}g/10{\mu}l$) administration of triptolide alleviated the formalin-induced pain behaviors in the 2nd phase, especially 25~40 minutes after formalin injection. Triptolide could be a promising analgesic agent in the treatment of inflammatory orofacial pain.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.3
• /
• pp.510-521
• /
• 2006

This investigation was undertaken to examine the extent to which tooth size and arch dimension each contribute to dental crowding. The sample included 50 subjects with well aligned dentition (25 males, 25 females) and those of 40 subjects with gross dental crowding(20 males, 20 females). Plaster model and digital model made from alginate impression taken at the one visit. Tooth size, arch length, arch perimeter, intercanine width and intermolar width was measured on the plaster and digital models. The findings in this study lead to the following conclusions. 1. In maxilla, the mesiodistal diameters of lateral incisor and premolars of the crowded group were significantly larger than those of the normal occlusion group (P<0.05). 2. In mandible, the mesiodistal diameters of central incisor, canine and premolars of crowded group were significantly larger than those of the normal occlusion group (P<0.05). 3. In maxilla, arch perimeter and intermolar width of crowded group were significantly smaller than normal occlusion group but intercanine width of crowded group were larger than normal occlusion group (P<0.05). There was no significantly difference in arch length (P>0.05). 4. In mandible, arch perimeter of crowded group was smaller than normal occlusion group(P<0.05). There were no difference in arch length intermolar width and intercanine width (P>0.05) 5. In the analysis of correlation coefficients of arch length discrepancy with variables, arch perimeter, intermolar width and mesiodistal width of 2nd premolar showed positive correlations in maxilla. 6. There was a significant difference between tooth width measurements made by the 2 methods, with all the digital model measurement larger than plaster model measurements (P<0.05) : the magnitude of the differences does not appear to be clinically relevant. 7. In the analysis for reproducibility, the plaster model measurement was showed lower degree of correlation between 1st and 2nd measurement than digital model.