• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.348-354
• /
• 2017

Internationally different food safety regulation and standards could cause troubles in trade unless those are built on scientific knowledge. In this research, we monitored the microbial population and analyzed the results to determine the level of microbial contamination in foodstuffs using relatively new statistical analysis (microbiological sampling plan, International Commission on Microbiological Specification for Foods). The goal of this research falls on establishing entirely new standards for various food categories addressed in the Korean "Food Code". Targets for monitoring were indicator organisms (i.e. total aerobic count, coliform and Escherichia coli) and foodborne pathogens (i.e. Bacillus cereus, Staphylococcus aureus and Clostridium perfringens) in ready-to-eat (RTE) products. As the result of the monitoring, total aerobic count, coliform, E. coli, and B. cereus in RTE products were found at the mean values of 2.10 log CFU/g, -0.60 log CFU/g, -1.33 log CFU/g and -1.23 log CFU/g, respectively. S. aureus was detected with the level of -1.35 log CFU/g only in fresh-cut food, while C. perfringens was -1.37 log CFU/g only in ready-to-cook food. Other samples did not have any food borne pathogens. Total aerobic count, B. cereus, S. aureus and C. perfringens satisfied the Food Code (the MFDS). On the basis of the analysis, we proposed a draft of microbial criteria for RTE products.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.3
• /
• pp.17-24
• /
• 2004

In this paper, the wavelet video coding using Low-Band-Shift(LBS) method and multiresolution motion estimation(MRME) is proposed. To overcome shift- variant property on wavelet coefficients, the LBS was proposed. LBS method previously has superior performance in terms of rate-distortion characteristic. However, this method needs more memory and computational complexity. Therefore to reduce computational complexity of video coding using LBS, we combine MRME with LBS. When mm is applied only, it has 7 times as much as existing method's motion vector because each subband has different motion vector using property of LBS, number of motion vector decreases. Proposed method decreases motion vector, and it decreases motion compensated Prediction error by detailed motion estimation. And then it shows better coding performance. Also this method reduces computational amount by smaller search area in higher resolution. The computational complexity of the proposed method is 12.1% of that of existing method at 3-level wavelet transform. The experimental results with the proposed method show about 0.2∼9.7% improvement of MAD performance in case of lossless coding, and 0.1∼2.0㏈ improvement of PSNR performance at 4he same bit rate in case of lossy coding.

• The Journal of Society for e-Business Studies
• /
• v.22 no.1
• /
• pp.15-35
• /
• 2017

The method of weighted sum of evaluation using AHP is widely used in feasibility analysis and alternative selection. Final scores are given in forms of weighted sums and the alternative with largest score is selected. With two alternatives, as in feasibility analysis, the final score greater than 0.5 gives the selection but there remains a question that how large is large enough. KDI suggested a concept of 'grey area' where scores are between 0.45 and 0.55 in which decisions are to be made with caution, but it lacks theoretical background. Statistical testing was introduced to answer the question in some studies. It was assumed some kinds of probability distribution, but did not give the validity on them. We examine the various cases of weighted sum of evaluation score and show why the statistical testing has to be introduced. We suggest a non-parametric testing procedure which does not assume a specific distribution. A case study is conducted to analyze the validity of our suggested testing procedure. We conclude our study with remarks on the implication of analysis and the future way of research development.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.280-293
• /
• 2005

In this study, a model to calculate the expected total construction cost has been developed by combining a model to calculate the sliding distance of a caisson of a vertical breakwater and a model to calculate the rehabilitation cost of a caisson. The optimal cross-section of a caisson of a vertical breakwater is defined as the cross-section that requires a minimum expected total construction cost within the allowable limit of caisson sliding. Two allowable limits are considered: 0.1 m of the expected sliding distance during the lifetime of the breakwater and 0.1 of the probability that the cumulative sliding distance during the lifetime of the breakwater is greater than 0.3 m. A discount rate has also been introduced to convert the future rehabilitation cost to the present value. The introduction of the discount rate reduces the expected total construction cost for the caissons designed for shorter return periods due to frequent rehabilitations. The present design method requires a smaller cross-section than the conventional deterministic method in shallow water depths, enabling us to design a caisson more economically. On the other hand, the above-mentioned allowable limits of caisson sliding show similar results for smaller water depths, while, for larger depths, the former requires a larger cross-section than the latter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.3
• /
• pp.236-244
• /
• 2010

In this paper, a planar structure negative group delay circuit(NGDC) is proposed to overcome the limited availability of the component values required for the prototype lumped element(LE) NGDC design. From the prototype LE circuit analysis, general design equations and the conditions to obtain the NGD are derived and illustrated. Then the LE circuit is converted into the planar structure by applying the transmission line resonator(TLR) theory. As a design example, the LE NGDC and the proposed planar structure NGDC are designed and compared. To estimate the commercial applicability, 2-stage reflection type planar NGDC with -5.6 ns of total group delay, -0.2 dB of insertion loss, and 30 MHz of bandwidth together with 0.1 dB and 0.5 ns of the magnitude and group delay flatness, respectively, for Wideband Code Division Multiple Access(WCDMA) downlink band is fabricated and demonstrated. Also, to show the applicability of the proposed NGDC, we have configured a simple signal cancellation loop and obtained good loop suppression performance.

• Archives of design research
• /
• v.19 no.2 s.64
• /
• pp.241-250
• /
• 2006

Hangeul as the Korean unique characters were invented according to some character-making principles and based on scholars' exhaustive researches. While most of the characters in the world evolved naturally, Hangeul was invented based on a precise linguistic analysis of the time, and therefore, it is most scientific and reasonable among various characters throughout the world. Nevertheless, Hangeul typeface designs do not seem to inherit the ideology of scientific and reasonable Hangeul correctly. For the square forms have been used intact due to the influences from the Chinese characters which prevailed during the time. If a single set of square characters should be designed, as much as 11,172 fonts should be designed, which suggests that advantages of Mangeul may not well be used fully; Hangeul was invented to visualize every sound with the combinations of 28 vowels and consonants. Problems of such square fonts began to be identified since 1900's when typewriters were introduced first from the West. Since a typewriter is designed with 28 characters laid out on its keyboard by using such combinations, the letters may be easily combined on it. The so-called the flexibility square-format typeface was born as such. Specially, the three-pairs fonts of these can be combined up to 67 letters including vowels and consonants. The three-pairs fonts system can help to solve the problems arising form the conventional square fonts and inherit the original ideology of Hangeul invention. This study aims to review the history of the three-pairs fonts designs facilitated by mechanic encoding of Hangeul and thereupon, suggest some desirable directions for future Hangeul fonts. Since the flexibility square-format typeface is expected to evolve more and more owing to development of the digital technology, they would serve our age of information in terms of both functions and convenience. Just as Hunminjongum tried to be literally independent from the Chinese characters, so the flexibility square-format typeface designs would serve to recover identity of our Hangeul font designs.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.85-97
• /
• 2001

In this study, the purpose behind this research is to propose index to be used for classification of functional the urban streets and to select the feasible length of special management link by the index. This special management link help decision makers found a transportation policy. In order to perform functional classification, index such as average traveled distance, link VKT and VKT per length-lane are use at the study. Average traveled distance index is average traveled distance divided by length of Path k and VKT per length-lane is trip volume characteristic considering lanes and length of Path k. Special management links on which major part of the vehicle are selected with using Path-VKT which represents how many long-distance touring vehicles are on the arterial road. The selection of special management links are performed with network composed of 14 paths (arterial roads) in seoul The total distance of special management links resulted from the above analysis is 141km(35.0% of the whole paths length) and total VKT of the special management links is 4,152,475 VKT(45.2% of the whole paths VKT)

• Applied Chemistry for Engineering
• /
• v.8 no.1
• /
• pp.1-7
• /
• 1997

We show that the usage of the cyclic pressure function in the freeze drying is more effective than the drying rate of the constant pressure process. The ultimate object of this process is to reduce energy costs by shortening the drying time. In this work, the concept of cyclic pressure function to decrease the drying time and the effects of the following factors on drying rate are considered ; pulse type, size in amplitude of pressure, size of intermediate time. Temperature for drying has always been maintained constantly at $20^{\circ}C$ and the pulse type could have found to give useful results than the constant pressure by altering chamber pressure from low pressure to high pressure Also, when the amplitude of the pulse is 0.4 torr and the intermediate time is six hour the drying rate was increased considerably.

• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.5
• /
• pp.320-332
• /
• 2007

Recently, new interests on digital contents and UCC(User Created Content)s are growing fast through the development of internet. However, there have been many side-effects on those interests. The representative problems are perversing illegal copies and the distributions for personal valuable digital contents to unauthorized anonymous users. These decrease creation of good digital contents by interfering with the growth of information technology industry and the content provider#s creative will. To resolve these problems, in the paper, we propose a novel auction system for multimedia contents and bidding processes. The system applies the concept of used goods onto digital contents. Especially, the auction system is based on mobile environment. Finally, the performance evaluation shows that those main auction process algorithms indicate the time complexity of logarithm scale for insertions and searches. Therefore, the performance of the system is not significantly influenced by the amount of contents even though the volume of contents in the system is increasing.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2012.05a
• /
• pp.462-463
• /
• 2012

팍스시스템은 의료 영상을 디지탈화한 시스템이다. PACS데이터는 초창기 CR(Computed Radiography)의 경우 10MB내외의 데이터를 발생하였으나 의료장비의 발전으로 인해 DB(Digital Radiography)는 20MB이상의 데이터를 발생하였다. 또 CT(Computed Tomography)의 경우 0.5MB데이터를 100Slice내외의 데이터를 발생하였으나, 현재는 Cardiac/PET 등의 CT는 Multi Frame을 지원하며 300~5000Slice이상의 데이터를 발생하게 됨에 따라 네트워크에 상당한 트래픽이 발생하여 병원 진료 환경에 심각한 영향을 초래한다. 또한, 스마트 폰, 태블릿 pc등의 발전으로 인해 많은 사용자들은 실시간 또는 멀티미디어와 같은 데이터 표현 방식으로 팍스 데이터를 보길 원할 것이며, 팍스 시스템 또한 그러한 요구조건을 만족시키기 위해 발전하고 있다. 병원에서 사용하는 네트워크는 인터넷 서비스의 모토인 best effort방법을 일반적으로 사용한다. 이러한 데이터 전송방식은 진료에 직접적인 영향을 미치는 팍스 데이터의 전송에 영향을 미칠 수 있다. 특히 네트워크의 트래픽이 제한적인 환경에서 높은 대역폭을 요구하는 멀티미디어 팍스 데이터를 다수의 사용자들이 전송받기 원하면 지연시간으로 인해 원활한 진료진행을 방해 받을 수 있다. 이러한 문제를 해결하기 위해 네트워크 개발자들은 QoS라는 개념을 도입하였고, 여러 계층에서 QoS를 보장하기 위한 연구가 진행되였다. 일반적으로, 네트워크에서 QoS를 지원하기 위한 여러가지 형태의 연구들을 조사하고, 분산 시스템을 제어하기 위한 DDS 미들웨어에 대한 연구를 기반으로 병원 네트워크에서 적용 방안을 설계하고 시뮬레이션을 통해 검증함으로써 새로운 형태의 병원 네트워크를 제안하고자 한다.