• Journal of the Korean Magnetics Society
• /
• v.1 no.1
• /
• pp.1-5
• /
• 1991

The magnetic properties of the polycrystalline ${(Fe_{2}O_{3})}_{1-x-y}{(In_{2}O_{3})}_{x}{(Eu_{2}O_{3})}_{y}$(x=0.01, y=0.02과 x=0.02, y=0.03) have been studied by the methods of X-ray diffraction, $M\"{o}ssbauer$ effect, and magnetic hysteresis measurement. The X-ray diffraction patterns show that the samples have a same crystal structure as $\alpha-Fe_{2}O_{3}$. From the analysis of the temperature dependence of the quadrupole splitting and average half-width, it is found that the Morin transition occurs in the sample of x=0.01 and y=0.02 and the spin angle defined as the angle between the [111] crystal axis and antiferromagnetic vector, changes from about $35^{\circ}$ to the (111) plane as increasing the temperature in the sample of x=0.02 and y=O.03. The temperature dependence of magnetic hyperfine field is analyzed by using the spin-wave theory. The isomer shift values at room temperature are found to be given by about 0.35mm/s for the samples which means that the Fe ions belong to $3^{+}ion$. The temperature dependence of isomer shift was analyzed by using the Debye model.

• Textile Coloration and Finishing
• /
• v.17 no.3 s.82
• /
• pp.43-48
• /
• 2005

시료는 POY사 104/192로 Draw-Winder(독일, Zinser)를 이용하여 기존의 태세사 제조장치의 부분적인 개조를 통하여 길이방향으로 강제적인 태세사가 형성되도록 하는 제조기술을 이용하여 Thin-thick yam(T&T사) 6종류를 제조하였으며 제조 조건에 따른 구조변화와 물성에 대하여 연구 검토한 결과 다음과 같다. 결정화도의 변화는 Draw-winder의 R2 roller 온도가 상온인 경우보다 $100^{\circ}C$인 경우가 높게 나타났으며 태세사의 세(thin)부분의 복굴절률은 연신비가 높고 Draw winder의 roller(R2)의 온도가 높을수록 복굴절 값은 선형적으로 증가하였다. T&T사 제조시 연신 온도가 상온인 경우는 Thin부분만 연신이 진행되고 Thick 부분은 원사인 POY사의 성질이 그대로 유지하고 있음을 알 수 있고 R2 roller 온도가 상온에서 제조된 시료의 초기탄성률은 약1.5-2.0kgf/denier 정도로 높게 나타났으나 $100^{\circ}C$로 제조된 시료는 약 0.2-0.8kgf/denier 정도로 낮게 나타났다.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.1E
• /
• pp.42-49
• /
• 1992

시간 영역에서 음성의 피치 정보를 추출하는 새로운 알고리즘을 제안한다. 이 알고리즘은, 위상 이 일치하는 고조파 성분의 합은 위상이 일치하지 않는 고조파 성분의 합의 경우보다 주기 정보를 분명 히 나타낸다는 사실을 이용한 것이다. 즉, 음성 신호의 위상 성분을 0으로 되도록 하여 실질적으로 기본 파와 모든 고조파 성분의 위상을 일치시킨다. 이 알고리즘은 잡음이 없는 음성의 경우 0.18%의 조오류 를 보이며, 0dB 눅의 경우에도 3.63%의 조오류를 보임으로써 잡음에 강건한 성질이 있음을 알 수 있다. 또한 시간 영역에서의 결정 논리를 사용하므로 피치 해상도가 우수하다. 전반적인 실험결과는 제안된 알고리즘이 피치 검출에 상당히 효율적임을 나타낸다.

• The Korean Journal of Rheology
• /
• v.7 no.3
• /
• pp.250-260
• /
• 1995

스크류 압출기로 제조한 poly(ether ether ketone) (PEEK)과 p-hydroxy benzoic acid/poly(ethylene tere-phthalate) (HBA/PET)의 공중합체인 열방성 액정 고분자의 블렌드 를 전조성에 대하여시차 주사 열분석기 (DSC)와 주사전자현미경(SEM)을 이용하여 연구하 였다. 측정된 유리전이 온도와 유리전이 온도에서의 열용량 증가분으로부터 PEEK가 액정고 분자에 녹아들어가는 양보다 액정 고분자가 PEEK에 녹아들어가는 양이 더 많음을 알수 있 었다. 고분자-고분자상호작용계수($\chi$12)값은 35$0^{\circ}C$에서 0.069$\pm$0.004이었고, 짝상에서 액정고 분자의 degree of disorder는 PEEK의 질량분율이 증가함에 따라 증가하였다. 블렌드에서 PEEK의 결정화에 액정 고분자는 거의 영향을 주지않았고 액정 고분자의 결정화 역시 PE 따에 영향을 받지 않았다. 모폴로지연구에서는 액정 고분자를 PEEK에 10%첨가시에 PEEK 의 메트릭스상에서 액정 고분자가 신장된 타원형을 형성하였으며 액정 고분자를 20% 첨가 시에는 액정 고분자가 섬유상구조를 가지고 있었다.

• Applied Microscopy
• /
• v.4 no.1
• /
• pp.5-10
• /
• 1974

In this work the effect of pre-rolling on the homogenization and on the mechanical properties of 4.6% Mg-0.5% Mn-0.18% Cr-Al alloy has been studied. At room temperature tensile strength and elongation have been found to increase in the pre- rolled homogenized sample compared to those of the as cast sample. At $400^{\circ}C$ this pre-rolled homogenized sample has shown a little lower tensile strength and a remarkably higher elongation than the samples as casted or homogenized without pre-rolling. Metallurgical microstructure of the pre-rolled homogenized sample has shown conspicuously less secondary phase such as ${\beta}$-phase at the grain boundaries than the other samples. The difference of magnesium content between grain boundaries and within the grains has been also checked by EPMA. The test results show enhanced homogenizing effect by the pre-rolling before homogenizing heat treatment.

• Journal of Digital Contents Society
• /
• v.10 no.4
• /
• pp.579-585
• /
• 2009

In [9], Tyrtshnikov proposed a preconditioned approach to derive a general solution from a Toeplitz linear system. Furthermore, the process of selecting a preconditioner matrix from symmetric Toeplitz matrix, which has been used in previous studies, is introduced. This research introduces a new method for finding the preconditioner in a Toeplitz system. Also, through analyzing these preconditioners, it is derived that eigenvalues of a symmetric Toeplitz are very close to eigenvalues of a new preconditioner for T. It is shown that if the spectrum of the preconditioned system $C_0^{-1}T$ is clustered around 1, then the convergence rate of the preconditioned system is superlinear. From these results, it is determined to get the superliner at the convergence rate by our good preconditioner $C_0$. Moreover, an advantage is driven by increasing various applications i. e. image processing, signal processing, etc. in this study from the proposed preconditioners for Toeplitz matrices. Another characteristic, which this research holds, is that the preconditioner retains the properties of the Toeplitz matrix.

• Journal of the Korean Magnetics Society
• /
• v.10 no.2
• /
• pp.54-61
• /
• 2000

The structural and magnetic properties of sputtered CoNbZr alloy films were investigated. In the as-deposited $Co_{87.0}$N $b_{8.5}$Z $r_{4.5}$ film deposited at 2 mTorr and 130 W, we observed the minimum coercivity of 1.75 Oe, the maximum resistivity of 3000 $\mu$Ω.cm and permeability of 1095 at 100 MHz. As the Ar pressure or the RF input power increased, the permeability of films at 100 MHz decreased and the coercivity increased because of the development of columnar structure and the formation of unstable amorphous phase. Permeability lower than 100 and coercivity of 60 Oe were observed in film deposited at 1 mTorr or 190 W due to the formation of crystalline phase. Magnetic anisotropy field of as-deposited films could be reduced by rotating field annealing for 120 minutes at 30$0^{\circ}C$. After the annealing, the anisotropy field (Hk) decreased from 1.43 Oe to 0.3 Oe and the permeability increased from 1095 to 1345 because defects in as-deposited films were eliminated by the annealing.aling.

• Journal of Korea Foundry Society
• /
• v.4 no.4
• /
• pp.20-29
• /
• 1984

It is very important to obtain gray and ductile cast irons with completely pearlitic structure by addition more economical alloying elements. In this study, 9 melts of gray iron and 5 melts of Mg-treated ductile cast iron were made according to Sb content (0-0.08% Sb). Each melt were casted to ${\phi}20mm$ test bars in sand mold under the same condition and inspected microstructure, mechanical and thermal properties. The results obtained from this study are as follows: 1. It is confirmed that Sb should be an economical, simple and useful additive for avoiding ferrite in gray and even in ductile cast irons. 2. For gray cast iron, the recommended ladle addition of metallic Sb amounts to 0.05%. At these levels, Sb has no detrimental influence on the mechanical properties of gray cast irons, which are normally modified according to their pearlite content without increasing the chilling tendency. 3. Despite its adverse influence on graphite shape in ductile iron, Sb can be used as a pearlite stabilizing alloying element even in the case of Mg - treated iron. The quantity to be added does not exceed 0.04% in the case of thinwalled castings. 4. The nodule count is increased very much and the shape of graphite particles become remarkably spheroidal. The matrix may be fully pearlitized, except for thin - walled castings, because the high nodule count results inevitably in some ferrite. 5. The $Ac_1$ and pearlite decomposition temperature are rised in accordance with increasing of additive Sb amount.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.404-408
• /
• 1983

Some properties of malic enzyme (EC 1.1.1.40) prepared from malate-decomposition yeast, Schizosac-charomyces japonicus var. japonicus St-3 were investigated. The activity of malic enzyme was maximum when it was cultured for 24 hours. The optimum conditions for the enzyme reaction were pH 10.0 and temperature of $25^{\circ}C$. The crude enzyme was very stable at the range of pH 7.0-8.4, and almost 50 percent of enzyme activity was lost by heating at $60^{\circ}C$ for 10 minutes. The malic enzyme activity was enhanced by the addition of $Mn^{++}$. But the enzyme activity was not affected by the addition of organic acids, amino acids and ethanol, respectively.

• Korean Journal of Food Science and Technology
• /
• v.8 no.4
• /
• pp.230-235
• /
• 1976

The current experiment has been carried out in order to find the chemical and physical properties of three species of the acorn starch. The results of the experiment are as follows. 1. Acorn is made up of 3.5-5.0% of lipid, 7.2-7.7% of protein, 71.6-76.3% of carbohydrate, and 1.9-2.2% of ash. 2. The purifying method of ether treated is better than that of 85% methanol treated for isolating pure starch. 3. Initial gelatinization temperature of the acorn starches ranged from $61-68^{\circ}C$; Quercus crispula Blume was the lowest and Quercus mongolica Fischer was the highest. On viscosity, Quercus mongolica Fischer shows the highest and Quercus crispula Blume shows the lowest. 4. It is estimated that the acorn starch lie halfway between those of the potato starch and the corn starch. By drying at $100^{\circ}C$, the crystal structure is destroyed first in the farther part of the lattice distance.