• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.842-848
• /
• 2022

Parametric studies of heat transfer and fluid flow are very important research of interest because the design and operation of fluid flow and heat transfer systems are guided by these parametric studies. The safety of the system operation and system optimization can be determined by decreasing or increasing particular fluid flow and heat transfer parameter while keeping other parameters constant. The parameters that can be varied in order to determine safe and optimized system include system pressure, mass flow rate, heat flux and coolant inlet temperature among other parameters. The fluid flow and heat transfer systems can also be enhanced by the presence of or without the presence of particular effects including gravity effect among others. The advanced Generation IV reactors to be deployed for large electricity production, have proven to be more thermally efficient (approximately 45% thermal efficiency) than the current light water reactors with a thermal efficiency of approximately 33 ℃. SCWR is one of the Generation IV reactors intended for electricity generation. High Performance Light Water Reactor (HPLWR) is a SCWR type which is under consideration in this study. One-eighth of a proposed fuel assembly design for HPLWR consisting of 7 fuel/rod bundles with 9 coolant sub-channels was the geometry considered in this study to examine the effects of system pressure and mass flow rate on wall and fluid temperatures. Gravity effect on wall and fluid temperatures were also examined on this one-eighth fuel assembly geometry. Computational Fluid Dynamics (CFD) code, STAR-CCM+, was used to obtain the results of the numerical simulations. Based on the parametric analysis carried out, sub-channel 4 performed better in terms of heat transfer because temperatures predicted in sub-channel 9 (corner subchannel) were higher than the ones obtained in sub-channel 4 (central sub-channel). The influence of system mass flow rate, pressure and gravity seem similar in both sub-channels 4 and 9 with temperature distributions higher in sub-channel 9 than in sub-channel 4. In most of the cases considered, temperature distributions (for both fluid and wall) obtained at 25 MPa are higher than those obtained at 23 MPa, temperature distributions obtained at 601.2 kg/h are higher than those obtained at 561.2 kg/h, and temperature distributions obtained without gravity effect are higher than those obtained with gravity effect. The results show that effects of system pressure, mass flowrate and gravity on fluid flow and heat transfer are significant and therefore parametric studies need to be performed to determine safe and optimum operating conditions of fluid flow and heat transfer systems.

• The Journal of the Korea Contents Association
• /
• v.21 no.12
• /
• pp.906-917
• /
• 2021

This study focused on real estate rental income, which is being interested as a means of preparing for old age in the age of low growth and aging. Rental income is seen to function as a safety net of society at a time when it is necessary to live a difficult old age due to the disconnection of income and the extension of the average life span. Therefore, this study conducted the following study on 1,025 households that own rental real estate nationwide. First, the relationship between the characteristics of the household of the rental real estate owner and the real estate rental income was analyzed, and second, it examined whether there is a difference in rental income between the group that engages in income activities other than rental income and the group that only has rental income without income activities. As a result of the analysis, among the demographic and sociological characteristics, gender and spouse were identified as significant variables in rental income. Among the economic characteristics, income and total debt were found to be significant variables. In the case of income activities, rental income was low, and rental income was high when the total debt was high. However, if interest rates rise and the economic recession is prolonged due to unpredictable causes, the owner may suffer from double-use. In preparation for this, it is necessary to review real estate policy alternatives such as easing the period of real estate holdings.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.2
• /
• pp.76-88
• /
• 2022

Urban parks play the role of providing leisure spaces for people in their everyday life along with serving ecological functions in the city. Although urban parks aim to satisfy the needs of users visiting the park, most urban parks are currently uniformly created and maintained without considering the environmental characteristics based on the needs of users. This study thus analyzed parks that underwent modifications in line with the revised Park Act in 2005. There were 45 parks whose types were legally changed, of which 21 were changed from children's parks to small parks, and 19 were changed to utilize and highlight the themes such as cultural parks and historical parks. Among the parks whose types have changed, the ratio of amenities in cultural and historic parks has increased, while the facility area in small parks has decreased and the green area has increased in its place. As a result of analyzing the changes to the park facility area, it was confirmed that increasing park amenities has a positive effect in pursuing revitalization of use through park maintenance, but has a negative consequence of significantly decreasing green area. It is necessary to reorganize the park type classification system to reflect the park environment and prepare guidelines for a new installation standard by park type to expand the net function of parks in cities and maintain the sustainable ecological environment. Through in-depth discussions on the facilities of park types, it is anticipated that innovative and multilateral research could be conducted to prepare improvement measures tailored to the guidelines of urban park types in years to come.

• Journal of the Korean Institute of Gas
• /
• v.26 no.4
• /
• pp.41-57
• /
• 2022

The global demand for carbon neutrality in response to climate change is in a situation where it is necessary to prepare countermeasures for carbon trade barriers for some countries, including Korea, which is classified as an export-led economic structure and greenhouse gas exporter. Therefore, digital transformation, which is one of the predictable ways for the carbon-neutral transition model to be applied, should be introduced early. By applying digital technology to industrial gas manufacturing facilities used in one of the major industries, high-tech manufacturing industry, and hydrogen gas facilities, which are emerging as eco-friendly energy, abnormal detection, and diagnosis services are provided with cloud-based predictive diagnosis monitoring technology including operating knowledge. Here are the trends. Small and medium-sized companies that are in the blind spot of carbon-neutral implementation by confirming the direction of abnormal diagnosis predictive monitoring through optimization, augmented reality technology, IoT and AI knowledge inference, etc., rather than simply monitoring real-time facility status It can be seen that it is possible to disseminate technologies such as consensus knowledge in the engineering domain and predictive diagnostic monitoring that match the economic feasibility and efficiency of the technology. It is hoped that it will be used as a way to seek countermeasures against carbon emission trade barriers based on the highest level of ICT technology.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.65-76
• /
• 2022

The New Excellent Technology (NET) designation system, introduced in 1989 for the purpose of promoting the development of domestic construction technology and enhancing national competitiveness, reviews the statement of construction cost of new technologies. And the cost reduction effect such as design, construction, and maintenance cost and the effect of reducing the construction duration are evaluated as an evaluation criteria of economic feasibility. However, in this evaluation process, differences of opinion between the institution of construction cost estimating standard management and the new technology developer about unique technologies frequently occur. In addition it is difficult to objectively compare the construction duration with existing similar technologies because there is no information on productivity as the current cost estimating standards for new technologies only present the required amount per unit quantity. In this study, the current state of cost estimating criteria review procedure, evaluation criteria, and cost estimating standards establishment method were analyzed when screening for the designation of a new construction technologies, and compared with overseas cost estimating standards, measures to improve the cost estimating standards of current construction new technologies were suggested. Through the improved cost estimating standards of this study, it is expected that cost information on new technologies will be provided to clients in more detail than the current ones, and the availability and applicability of new construction technologies would be improved by simplifying the construction cost calculation process more.

• Korean Journal of Clinical Pharmacy
• /
• v.32 no.3
• /
• pp.215-225
• /
• 2022

Background: Patients with hematologic cancers have a risk of drug-related problems (DRPs) from medications associated with chemotherapy and supportive care. Although the role of oncology pharmacists has been widely documented in the literature, few studies have reported its impact on cost reduction. This study aimed to describe the activities of oncology pharmacists with respect to hematologic diseases and evaluate the associated cost avoidance. Methods: From January to July 2021, patients admitted to the department of hemato-oncology at Seoul National University, Bundang Hospital were studied. The activities of oncology pharmacists were reported by DRP type following the Pharmaceutical Care Network version 9.1 guidelines, and the acceptance rate was calculated. The avoided cost was estimated based on the cost of the pharmacy intervention, pharmacist manpower, and prescriptions associated with the intervention. Results: Pharmacists intervened in 584 prescriptions from 208 patients during the study period. The most prevalent DRP was "adverse drug event (possibly) occurring" (32.4%), followed by "effect of drug treatment not optimal" (28.6%). "Drug selection" (42.5%) and "dose selection" (30.3%) were the most common causes of DRPs. The acceptance rate of the interventions was 97.1%. The total avoidance cost was KRW 149,468,321; the net profit of the avoidance cost, excluding labor costs, was KRW 121,051,690; and the estimated cost saving was KRW 37,223,748. Conclusion: Oncology pharmacists identified and resolved various types of DRPs from prescriptions for patients with hematologic disease, by reviewing the prescriptions. Their clinical service contributed to enhanced patient safety and the avoidance of associated costs.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.59-68
• /
• 2022

This paper presents a method for 1:1 verification by comparing the similarity between the given real product image and the drawing image. The proposed method combines two existing CNN-based deep learning models to construct a Siamese Network. After extracting the feature vector of the image through the FC (Fully Connected) Layer of each network and comparing the similarity, if the real product image and the drawing image (front view, left and right side view, top view, etc) are the same product, the similarity is set to 1 for learning and, if it is a different product, the similarity is set to 0. The test (inference) model is a deep learning model that queries the real product image and the drawing image in pairs to determine whether the pair is the same product or not. In the proposed model, through a comparison of the similarity between the real product image and the drawing image, if the similarity is greater than or equal to a threshold value (Threshold: 0.5), it is determined that the product is the same, and if it is less than or equal to, it is determined that the product is a different product. The proposed model showed an accuracy of about 71.8% for a query to a product (positive: positive) with the same drawing as the real product, and an accuracy of about 83.1% for a query to a different product (positive: negative). In the future, we plan to conduct a study to improve the matching accuracy between the real product image and the drawing image by combining the parameter optimization study with the proposed model and adding processes such as data purification.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.6
• /
• pp.655-660
• /
• 2022

This paper analyzes the problem of the economic order quantity (lot size) of a retailer in a two-stage supply chain consisting of a supplier, a retailer(distributor), and a customer. In this two-stage supply chain, the supplier permits the retailer to defer payment for a certain fixed period of time for the purchase cost to be paid by the retailer as a price differentiation strategy with his competitor. In addition, in the case of customer goods such as food and grain, it is common to see that end-customer demand is generally depend on the level of inventory displayed by the retailer. From this perspective, this paper analyzes the inventory problem of retailers under the assumption that the supplier may allow a certain period to suspend payments for the purchase of goods and the end customer demand is a function of the retailer's inventory level increasing with size. In this regard, we need to analyze how much the length of the grace period for product purchase costs affect the retailer's lot-sizing policy. Therefore, we formulate the retailer's annual net profit and analyze the effect of the length of credit period on the retailer's inventory policy numerically.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.4
• /
• pp.13-24
• /
• 2021

This study used big data to analyze visitors' experiences in Fishing Experience Recreation Village. Through the portal site posting data for the past six years, the experience of visiting Fishing Experience Villages in Baekmi and Susan was analyzed. The analysis method used Text mining and Social Network Analysis which are Big data analysis techniques. Data was collected using Textom, and experience keywords were extracted by analyzing the frequency and importance of experience texts. Afterwards, the characteristics of the experience of visiting the Fishing Experience Village were identified through the analysis of the interaction between the experience keywords using 'U cinet 6.0' and 'NetDraw'. First, through TF and TF-IDF values, keywords such as "Gungpyeong Port", "Susan Port", and "Yacht Marina" that refer to the name of the port and the port facilities appeared at the top. This is interpreted as the name of the port has the greatest impact on the recognition of the Fishing Experience Villages, and visitors showed a lot of interest in the port facilities. Second, focusing on the unique elements of port facilities and fishing villages such as "mud flat experience", "fishing village experience", "Gungpyeong port", "Susan port", "yacht marina", and "beach" through the values of degree, closeness, and betweenness centrality interpreted as having an interaction with various experiences. Third, through the CONCOR analysis, it was confirmed that the visitor's experience was focused on the dynamic behavior, the experience program had the greatest influence on the experience of the visitor, and that the experience of the static and the dynamic behavior was relatively balanced. In conclusion, the experience of visitors in the Fishing Experience Villages is most affected by the environment of the fishing village such as the tidal flats and the coast and the fishing village experience program conducted at the fishing port facilities. In particular, it was found that fishing port facilities such as ports and marinas had a high influence on the awareness of the Fishing Experience Villages. Therefore, it is important to actively utilize the scenery and environment unique to fishing villages in order to revitalize the Fishing Experience Villages experience and improve the quality of the visitor experience. This study is significant in that it studied visitors' experiences in fishing village recreation villages using big data and derived the connection between fishing village and fishing village infrastructure in fishing village experience tourism.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.5
• /
• pp.90-102
• /
• 2022

In recent years, as interest in healing increases, outdoor spaces with the concept of healing have been created. For more professional and in-depth planning and design, the perception and characteristics of outdoor healing places through social media posts were analyzed using NER. Text mining was conducted using 88,155 blog posts, and frequency analysis and clique cohesion analysis were conducted. Six elements were derived through a literature review, and two elements were added to analyze the perception and the characteristics of healing places. As a result, visitors considered place elements, date and time, social elements, and activity elements more important than personnel, psychological elements, plants and color, and form and shape when visiting healing places. The analysis allowed the derivation of perceptions and characteristics of healing places through keywords. From the results of the Clique, keywords, such as places, date and time, and relationship, were clustered, so it was possible to know where, when, what time, and with whom people were visiting places for healing. Through the study, the perception and characteristics of healing places were derived by analyzing large-scale data written by visitors. It was confirmed that specific elements could be used in planning and marketing.