• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.627-633
• /
• 2008

This study was conducted to estimate volume growth rates for major Quercus species distributed in Korea, and based on the data collected from the 5th National Forest Inventory. Volume growth rates were estimated by each age class for each species, and their similarity or distinction was statistically analyzed. It was also intended to compare the resulted volume growth rates with the existing growth rates, and to develope a volume growth rate estimation model for the Quercus species. Six major Quercus species were considered in this study; Quercus acutissima, Quercus aliena, Quercus serrata, Quercus variabilis, Quercus dentata, and Quercus mongolica. Based on the data collected from the 5th National Forest Inventory, the diameter growth rates and the height growth rates were estimated for each species, and then the volume growth rates were estimated with the given diameter and height growth rates. To examine the distinction between species or age classes, statistical analyses such as ANOVA and Duncan's multiple range test were applied. The results indicated that the volume growth rate was 10% in the age class II, 6% in the age class III, and lower in the subsequent classes. In addition, the volume growth rates of Quercus acutissima, Quercus aliena, and Quercus serrata were relatively high compared to those of Quercus variabilis, Quercus dentata, and Quercus mongolica. According to their growth rates, the six Quercus species were classified into two groups; high-growth-rate group and low-growth-rate group. Statistical analysis conducted to examine the difference between and within the groups showed that there is no significant difference within groups, while significant between groups. Based on the results, volume growth rate estimation model were finally developed for each group. The classification of the Quercus species suggested in this study was not the same with that of existing volume growth estimation. Thus, it is necessary to improve the existing volume growth rate or its estimation system.

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.42-51
• /
• 2015

In proton therapy, verification of proton dose distribution is important to treat cancer precisely and to enhance patients' safety. To verify proton dose distribution, in a previous study, our team incorporated a vertically-aligned one-dimensional array detection system. We measured 2D prompt-gamma distribution moving the developed detection system in the longitudinal direction and verified similarity between 2D prompt-gamma distribution and 2D proton dose distribution. In the present, we have developed two-dimension prompt-gamma measurement system consisted of a 2D parallel-hole collimator, 2D array-type NaI(Tl) scintillators, and multi-anode PMT (MA-PMT) to measure 2D prompt-gamma distribution in real time. The developed measurement system was tested with $^{22}Na$ (0.511 and 1.275 MeV) and $^{137}Cs$ (0.662 MeV) gamma sources, and the energy resolutions of 0.511, 0.662 and 1.275 MeV were $10.9%{\pm}0.23p%$, $9.8%{\pm}0.18p%$ and $6.4%{\pm}0.24p%$, respectively. Further, the energy resolution of the high gamma energy (3.416 MeV) of double escape peak from Am-Be source was $11.4%{\pm}3.6p%$. To estimate the performance of the developed measurement system, we measured 2D prompt-gamma distribution generated by PMMA phantom irradiated with 45 MeV proton beam of 0.5 nA. As a result of comparing a EBT film result, 2D prompt-gamma distribution measured for $9{\times}10^9$ protons is similar to 2D proton dose distribution. In addition, the 45 MeV estimated beam range by profile distribution of 2D prompt gamma distribution was $17.0{\pm}0.4mm$ and was intimately related with the proton beam range of 17.4 mm.

• Progress in Medical Physics
• /
• v.22 no.1
• /
• pp.28-34
• /
• 2011

To perform the Adaptive Radiation Therapy (ART), a high degree of deformable registration accuracy is essential. The purpose of this study is to identify whether the change of MV CBCT intensity can improve registration accuracy using predefined modification level and filtering process. To obtain modification level, the cheese phantom images was acquired from both kilovoltage CT (kV CT), megavoltage cone-beam CT (MV CBCT). From the cheese phantom images, the modification level of MV CBCT was defined from the relationship between Hounsfield Units (HUs) of kV CT and MV CBCT images. 'Gaussian smoothing filter' was added to reduce the noise of the MV CBCT images. The intensity of MV CBCT image was changed to the intensity of the kV CT image to make the two images have the same intensity range as if they were obtained from the same modality. The demon deformable registration which was efficient and easy to perform the deformable registration was applied. The deformable lung phantom which was intentionally created in the laboratory to imitate the changes of the breathing period was acquired from kV CT and MV CBCT. And then the deformable lung phantom images were applied to the proposed method. As a result of deformable image registration, the similarity of the correlation coefficient was used for a quantitative evaluation of the result was increased by 6.07% in the cheese phantom, and 18% in the deformable lung phantom. For the additional evaluation of the registration of the deformable lung phantom, the centric coordinates of the mark which was inserted into the inner part of the phantom were measured to calculate the vector difference. The vector differences from the result were 2.23, 1.39 mm with/without modification of intensity of MV CBCT images, respectively. In summary, our method has quantitatively improved the accuracy of deformable registration and could be a useful solution to improve the image registration accuracy. A further study was also suggested in this paper.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.3
• /
• pp.80-109
• /
• 2020

The Sacheonwangsa Temple in Silla is an esoteric temple that was founded provisionally in 670, and was completed in 679. This study attempted to elucidate the planning method of the Sacheonwangsa Temple based on the results of research on excavations and investigations into its construction processes and construction measures thereof. The research results are as follows. (1) In the site construction, assuming the size of one Bang (坊) on the south of Nangsan Mountain, after dividing the north-south width into three equal parts, there is a possibility that two of these parts were set to the flat portion. (2) In the 'Jochang (祖創, 670)', it is estimated that an area of 300 cheoks by 300 cheoks was postulated on the flat surface, and, as an initial conception, the mandala's plane design of the outer square 2 hasta (3 cheoks) and inner square 1 hasta (1.5 cheoks) was originally devised for the setting of 'Mudra (神印)', and an area 100 times greater has been set as the basis in the scale and layout planning of the central block. (3) During 'Gaechang (攺刱, ~679)', it is judged that because of the narrowness of the distance between the Pagoda and Geumdang Hall, which occurs when the center of the Geumdang Hall coincides with the center of 'the first stage of the foundation (先築基壇)', the scale and layout planning were adjusted from the initial conception. (4) The arrangement of the building was determined by dividing the fixed size of the central block (280 cheoks by 320 cheoks). Specifically, the east-west direction is set on the quartile's line of the east-west width of the central block, and in contrast, the north-south direction is based on the structural characteristics of the central block. It is presumed that the position of the transept was determined through the division and adjustment of the column spacing of the east-west corridor, then the Geumdang Hall and Altar were based on this. (5) The scale of the Geumdang Hall and Pagoda is determined by the petition of the division by the unit fraction starting from the quartile's line of the central block's east-west width. This planning is understood to be based on the self-similarity, which is rooted in the mandala's plane design as the model.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.3
• /
• pp.265-272
• /
• 2012

Purpose: To compare the results on myopia correction with reverse geometry lenses, effects of wearing reverse geometry lenses were evaluated for the children with low-level and high-level myopia. Methods: The research investigated the corrective effects of having worn reverse geometry lenses for one week, one month, three months and six months on a total of thirty-six persons (sixty-two eyes) between the ages of seven and fifteen, divided into three groups by the degree of their myopia; nineteen eyes(Group One) with myopia of -2.00 D and under, twenty-eight eyes(Group Two) with myopia between -2.25 D and -4 D, and fifteen eyes(Group Three) with myopia of -4.25 D and above; as shown by changes in uncorrected vision and the degree of refraction in the corneal topography, and tested for statistical similarity among the pursued results. Results: After wearing reverse geometry lenses, Group One showed an improvement in vision of 0.5, from 0.45 to 0.95, after one week, and improvements to 0.91 after one month and 1.02 after three months but, after six months, the group's vision regressed to 0.95. Group Two showed an improvement in vision of 0.43, from 0.34 to 0.77, after one week of wearing and to 0.91 after one month, to 0.97 after three months and this was statistically maintained through the remainder of six months. Group Three showed an improvement in vision of 0.55, from 0.15 to 0.7, after wearing for one week, to 0.87 after one month and to 0.91 after three months but saw a regression to 0.86 after six months. The average Sim K (simulated keratometry reading) value for Group One started from $42.84{\pm}1.17D$ and decreased to $41.48{\pm}0.98D$ after one week of wearing and continued declining through three months before increasing during the remainder of six months. Group Two began from $42.91{\pm}1.57D$ and recorded $41.78{\pm}1.58 D$ after one week, continuing the decline through three months before increasing during the remainder of six months. Group Three began at $42.64{\pm}1.64D$ and showed its Sim K value decrease to $40.77{\pm}1.20D$ after one week of wearing, increase after one month and decrease after three months and continue the decline through the remainder of six months. Conclusions: From the results of this study, wearing reverse geometry lenses had myopia-correcting effects after one week of wearing. Although there were variations in the time for such effect to take place but myopia-correcting effects were evident in all test groups.

• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.11-15
• /
• 2005

Fruit characteristics, saccharinity, and antioxidative activity of selected clones of Rubus coreanus, grown in Korea, well-known as edible and medical resources, frequently used and which has an excellent pharmacological activity are examined and analyzed. The results obtained from this study can be summarized as follows; Result of surveying characteristics for the fruit and saccharinity variation by collection time, there are some meaningful differences between examined clones and the collection time, exception of the fruit width. From the clones, SG 3 is the biggest in size, the highest in the saccharinity out of five clones, on the other hand, CJ 18 and SH 3 are the opposite. Meanwhile, comparing examined saccharinity factor with maximum temperature and precipitation out of daily climates at Suwon Meteorological Observatory at the same period, on the day the highest temperature is $29.5^{\circ}C$, saccharinity distinctively ascends, but on the day the precipitation is recorded 121.5 mm and next day, the saccharinity descends. Also, five-day saccharinity until the precipitation lower than 0.1 mm per day shows from 10.4 to 11.5 Brix higher than the average saccharinity of 9.7 Brix. Fifteen clones including CA 6 about fruit characteristics in terms of collection layer and saccharinity variation were examined, there is significantly difference among examined clones, but about the collection layer, only saccharinity factor has meaningful significance. For clones, MJ 11 is the biggest and excellent character of 15 clones but the saccharinity, 10.3 Brix lows a bit, MC 9 and HAE 5 are the worst fruit in character but saccharinity is 13.4 Brix and 10.6 Brix which is higher than the average saccharinity of 9.8 Brix. About saccharinity for the collection layer, the fruit average saccharinity, collected from the upper layer which is good at lightness and temperature condition, is 10.2 Brix which shows higher than the one of the fruit, 9.7 Bix and 9.5 Brix collected from the middle or the lower layer. The saccharinity of fruit collected from the middle or the lower layer is lower than the average saccharinity of 9.8 Brix out of 15 surveyed clones. Surveying antioxidative activity resulted from free radical scavenging activity about 30 clones of fruit in total, there is difference between surveyed clones. Especially, Immatured fruit extracts exhibited higher free radical scavenging activity of 94.5 to 97.5% which indicates the similarity to Ascorbic acid, unlike other clones, on the concentration of 250 to 1,000 ppm.

• Journal of Korean Society of Forest Science
• /
• v.62 no.1
• /
• pp.60-67
• /
• 1983

Karyotype analysis of somatic chromosome was attempted to find out the relationship among the 3 species of Abies growing in Korea, and A firma introduced from Japan The results were summarized as follows: 1) The number of somatic chromosome was equal for all species, 2n=24. 2) When somatic chromosome was arranged by descending order of the short arm length, the long arm of number 9 chromosome of A. holophylla was much larger than that of the other species. A. koreana and A. nephrolepis had a similarity in b/a value and A. holophylla and A. firma were also similar. 3) When it was arranged by descending order of the short arm length, eight chromosomes of A. koreana and A. nephrolepis showed a similar in b/a value, and two chromosomes of A. holophylla and A. firma did in its value. 4) When it was arranged by descending order of total length, chromosome numbers 7 and 8 in A. koreana were particularly similar to those in A. nephrolepis. 5) When it was arranged by descending order of total length, six somatic chromosomes of A. koreana and A. nephrolepis were similar in b/a value, and two somatic chromosomes of A. holophylla and A. firma similar in its value. 6) When it was arranged by descending order of long arm length, in the of b/a value of chromosome number one in A. koreana and A. nephrolepis was much larger, and that in A. holophylla and A. firma was much smaller than that in the others.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.321-342
• /
• 2016

The "uncanny valley" curve describes the measured results of the negative emotion response which depends on the similarity between the artificially created character and the real human shape. The "uncanny valley" effect that usually appears in the animation character design induces negative response such as fear and hatred feeling, and anxiety, which is not expected by designers. Especially, in the case of the commercial animation which mostly reply on public response, this kind of negative response is directly related to the failure of artificially created character. Accordingly, designers adjust the desirability of the character design by avoiding or utilizing the "uncanny valley" effect, inducing certain character effect that leads to the success in animation work. This manuscript confirmed the "uncanny valley" coefficient of the positive emotion character design which was based on the actual character design and animation analysis. The "uncanny valley" concept was firstly introduced by a medical scientist Ernst Jentsch in 1906. After then, a psychologist Freud applied this concept to psychological phenomenon in 1919 and a Japanese robert expert Professor Masahiro Mori presented the "uncanny valley" theory on the view of the recognition effect. This paper interpreted the "uncanny valley" effect based on these research theory outcomes in two aspects including sensation production and emotion expression. The mickey-mouse character design analysis confirmed the existence basis of the "uncanny valley" effect, which presented how mickey-mouse human shape image imposed the "uncanny valley" effect on audience. The animation work analysis investigated the reason why the produced 3D animation character should not be 100% similar to the real human by comparing the animation baby character produced by Pix company as the experimental subject to the data of the real baby with the same age. Therefore, the examples of avoiding or utilizing the "uncanny valley" effect in animation character design was discussed in detail and the four stages of sensation production and emotional change of audience due to this kind of effect was figured out. This research result can be used as an important reference in deciding the desirability of the animation character.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.772-781
• /
• 2013

The objective of this study was to develop simple sequence repeat (SSR) markers from expressed sequence tags (EST) of lettuce (Lactuca sativa) and identify 9 germplasms from 3 wild species of lettuce and 61 commercial cultivars using the developed EST-SSR markers. A total of 81,330 lettuce ESTs from NCBI databases were used to search for SSR and 4,229 SSR loci were identified. The highest proportion (59.12%, 2500) was represented by trinucleotide, followed by dinucleotide (29.70%, 1256) and hexanucleotide (6.62%, 280) among SSR repeat motifs. Totally 474 EST-SSR primers were developed from EST and a random set of 267 primers was used to assess the genetic diversity among 9 germplasms and 61 cultivars. Out of 267 primers, 47 EST-SSR markers showed polymorphism between 7 cultivars. Twenty-six EST-SSR markers among 47 EST-SSR markers showed high polymorphism, reproducibility, and band clearance. The relationship between 26 markers genotypes and 70 accessions was analyzed. Totally 127 polymorphic amplified fragments were obtained by 26 EST-SSR markers and two to nine SSR alleles were detected for each locus with an average of 4.88 alleles per locus. Average polymorphism information content was 0.542, ranging from 0.269 to 0.768. Genetic distance of clusters ranged from 0.05 to 0.94 between 70 accessions and dendrogram at a similarity of 0.34 gave 7 main clusters. Analysis of genetic diversity revealed by these 26 EST-SSR markers showed that the 9 germplasms and 61 commercial cultivars were discriminated by marker genotypes. These newly developed EST-SSR markers will be useful for cultivar identification and distinctness, uniformity and stability test of lettuce.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.39 no.1
• /
• pp.33-43
• /
• 2003

The midwater pair trawl which is being used at present in Korea have several problems. Firstly, it is difficult to control the net height on high towing speed. Secondly, net breaking often occurs owing to floats and thirdly, the volume of net on the net drum is so large. This study is aiming for examining the possibility of application for the Korean midwater pair trawl through the model experiment of non-float midwater pair trawl. The model of non-float midwater pair trawl was manufactured as 1/100 of the full scale net which is being used in bottom pair trawl for 850ps class considering the Tauti's Similarity law. The model experiment was carried out to analyze the opening efficiency according to the variation of lower warp length and the opening efficiency was investigated between th proto type and non-float type. The results obtained can be summarized as follows ; 1. The hydrodynamic resistance of non-float type was about 10~20% smaller than that of the proto type and it increased about 1ton according to the increase of dL at the condition of the same flow speed. The resistance acting on the lower warp decreased about 5% but that of the upper warp increased according to the increase of lower warp length (dL) at the condition of the same flow speed. 2. The net height of the non-float type decreased almost linearly according as the increased of flow speed and it increased in a logarithmic functional form with the increase of the lower warp length at the condition of the same flow speed. On the decreasing rate of the net height, the non-float type was lower than the proto type and the difference of the decreasing rate was about 12% at 3.0 knot, 25% at 4.0 knot, 25% at 4.0 knot respectively when dL was 30m. 3. The net width of non-float type was not varied so much as only 2m range and was larger than that of proto type. 4. The mouth area of non-float type decreased in a exponential functional form. On the decreasing rate of the mouth area, the non-float type was lower than the proto type. The filtering volume increased in a logarithmic functional form with increasing flow speed and the filtering volume of proto type decreased steeply over 3.0knot, but that of non-float type increased until 4.0knot. 5. The optimal length of lower warp was when the value of dL was about 30m and the optimal position of front weight was at the connection point of four net pendants.