• Membrane Journal
• /
• v.17 no.2
• /
• pp.99-111
• /
• 2007

It is impossible to remove toxic organic substances that are recognized as a cancer caused suspicious element in drinking water using the conventional water purification method. This study introduces groundwater into a reaction chamber as an effective amount of water to process this water using a mixed method of AOP oxidation and M/F membrane and purifies it as a desirable level by artificially mixing such toxic substances in order to effectively process the water. Based on this fact, this study configures an optimal operation condition. The VOCs existed in toxic substances was investigated as a term of phenol and toluene, and agricultural chemicals were also investigated as a term of parathion, diazinon and carbaryl. The experiment applied in this study was performed using a single and composite soolution. In the operation condition applied to fully dissolve and remove such substances, the amount of $H_2O_2$ injected in the process was 150 mL of a fixed quantity, the value of pH was configured as $5.5{\sim}6.0$, the temperature was controlled as a range of $12{\sim}16^{\circ}C$, the dissolved amount of ozone was applied more than 5.0 mg/L, the reaction time was determined as an optimal condition, such as $30{\sim}40$ minutes, and the segregation membrane in the same reactor was determined for acquire water drinking of large quantity using a pore size of $0.45{\mu}m$ M/F membrane.

• The Journal of the Petrological Society of Korea
• /
• v.8 no.2
• /
• pp.92-105
• /
• 1999

The Cretaceous Chaeyaksan basaltic rocks consist mainly of basaltic tuffs intercalating three layers of basalt. Stratigraphically, the rocks are located between the upper Songnaedong Formation and the lower Geoncheonri Formation and contain plagioclase, augite, hornblende, and a few olivine phenocrysts. Geochemically, they show calc-alkaline characteristics in some immobile element content, but show the alkaline suite feature in the mobile major element composition. The basalts are widely spilitized but some of them is altered to shoshonitic rocks with more calcic plagioclase, calcite, and chlorite, and adularia veinlets are common in the rocks. It is supposed that the post-eruption alteration of the rocks is done through alkali-replacement by hydrothermal solution or vapor rather than by low grade regional metamorphism. It is considered that A1 in hornblende will be available for estimating the pressure of the pre-eruption magma in the reservoir although the plagioclase of the rocks are highly albitized. The crystallization pressure was calculated as 5.7Kb by the equation of Johnson and Rutherford(l989) incorporating of the effect of overestimate of .41T in hornblende in the case of quartz-free rocks. Application of the estimated temperature, pressure and the constituent of phenocrysts of the rocks to the experimental P-T phase diagram for basalts established by Green(1982) indicates the crystallization course and succession of growth of the phenocrysts during of rising and cooling of the magma reservoir; augite + augite and olivine + augite, olivine, and hornblende -+ augite and hornblende+ augite, hornblende, and plagioclase. Such evolution course of the magma may include crystal fractionation by the phenocrysts crystallization and contamination by country rock in lower crust.

• Economic and Environmental Geology
• /
• v.39 no.6 s.181
• /
• pp.653-662
• /
• 2006

Quartz veins from the Jukwangri area of Hwawon-myeon are epithermal quartz veins that are filling the NW or NE-trending faults within Precambrian metasedimentary rocks. Based on their prolongation and ore grades, No. 1 quartz vein can be traced for about 200 m and varies 0.1 to 3 m in thickness. Mineralization of No. 1 quartz vein can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals(phyllic and argillic zones) such as illite, sericite and sulfides such as pyrite, arsenopyrite, sphalerite. chalcopyrite, galena, argentian tetrahedrite. Supergene stage is composed of Fe-Mn oxide, Zn-Fe oxide and Pb oxide. Fluid inclusion data indicate that homogenization temperature and salinity of hypogene stage range from 187 to $306^{\circ}C$ and ken 0.0 to 6.2 wt.% eq. NaCl, respectively. They suggest that ore forming fluids were progressively cooled and diluted from mixing with meteoric water. Oxygen($-4.1{\sim}4.1%o$) and hydrogen($-107{\sim}-88%o$) isotope com-positions indicated that hydrothermal fluids were derived from meteoric and evolved by progressive mixing with meteoric water during mineralization.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.513-525
• /
• 2009

The Buyeong gold-silver deposit consists of quartz veins that fill along the NS fault zone within Cretaceous Goseong formation. Mineralization can be divided into hypogene and supergene stages. Hypogene stage is associated with hydrothermal alteration minerals such as sericite, pyrite, chlorite, epidote and sulfides such as pyrite, pyrrhotite, marcasite, sphalerite, chalcopyrite, galena and galenobismutite. Supergene stage is composed of malachite, goethite, chalcocite, and sphalerite oxide. Fluid inclusion data indicate that homogenization temperatures and salinities range from 112 to $340^{\circ}C$ and from 0.2 to 7.9 wt.% NaCl, respectively. Sulfur(3.2~3.9‰) isotope composition indicates that ore sulfur was derived from mainly magmatic source as well as partly host rocks. The calculated oxygen(4.3~6.0‰) and hydrogen(-60~-64‰) isotope compositions indicate that hydrothermal fluids may be meteoric origin with some degree of mixing of another meteoric water for paragenetic time.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.8
• /
• pp.492-497
• /
• 2015

VOCs (Volatile Organic Compounds) are generally generated in the painting process, or at the company and laundry where use organic solvents. The VOCs consist of various hydrocarbons and has low calorific value due to its dilution with atmospheric air. Therefore, the VOCs are difficult to burn by a conventional fuel combustor. In this study, a novel plasma dump combustor was proposed for the treatment of low calorific VOC gases. This combustor was designed a combination of the characteristics in a plasma burner, a dump combustor and a 3D matrix burner. The combustor has good structure for maintaining enough residence time and reaction temperature for stable flame formation and VOC destruction. For investigating the performance characteristics of the plasma dump combustor, an experiment was achieved for VOC feed rate, VOC injector position, etc. Toluene was used as a surrogate of VOC. The novel combustor gave better performance than a conventional combustor, showing that VOC destruction rate and energy efficiency were 89.64% and 12.27 kg/kWh respectively, at feeding rate of 450 L/min of VOC of 3,000 ppm of toluene concentration.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.1
• /
• pp.58-66
• /
• 2004

The purpose of this study is to examine the possibility of reuse fermented foodwaste as a bulking agent in livestock waste and foodwaste composting. Aerobic composting device was added to the following sample : Foodwaste + Sawdust, Livestock feces+Sawdust, Foodwaste + Ferment, Livestock feces + Ferment. Temperature, pH, OM/N ratio, moisture, heavy metals, and microbes were measured in process of aerobic composting. The results of this study are following. 1. The composting period is determined in 16~24days, according to the change of temperature and OM/N ratio. 2. The salinity contents in compost of livestock waste and foodwaste ferment is about 0.5%, which can be solved the problems of salinity contents in foodwaste composting. 3. The proper ratio of livestock waste composting is 40% of cow feces to 60% of foodwaste ferment. 4. Processing expense of aerobic composting of foodwaste and sawdust is 40 won/kg composting expense of foodwaste and ferment is 30 won/kg. Fermented product composting can cut down the expense of bulking agent than others.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.45-53
• /
• 2010

For the determination of chlorine in uranium compound, analytical methods by using a steam distillation and a pyrohydrolysis have been developed. The steam distillation apparatus was composed of steam generator, distilling flask and condenser etc. The samples were prepared with an aliquot of LiCl standard solution and a simulated spent nuclear fuel. A sample aliquot was mixed with a solution containing 0.2 M ferrous ammonium sulfate-0.5 M sulfamic acid 3 mL, phosphoric acid 6 mL and sulfuric acid 15 mL. The chloride was then distilled by steam at the temperature of $140^{\circ}C$ until a volume of $90{\pm}5\;mL$ is collected. The pyrohydrolysis equipment was composed of air introduction system, water supply, quartz reaction tube, combustion tube furnace, combustion boat and absorption vessel. The chloride was separated from powdered sample which is added with $U_3O_8$ accelerator, by pyrohydrolysis at the temperature of $950^{\circ}C$ for 1 hour in a quartz tube with a stream of air of 1 mL/min supplied from the water reservoir at $80^{\circ}C$. The chlorides collected in each absorption solution by two methods was diluted to 100 mL and measured with ion chromatography to determine the recovery yield. For the ion chromatographic determination of chlorine in molten salt retained in a metal ingot, the chlorine was separated by means of pyrohydrolysis after air and dry oxidation, and grinding for the sample.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.1
• /
• pp.176-181
• /
• 2004

Gluconacetobacter hansenii TF-2, an isolate from black tea fungus, was statically cultivated to ferment cellulose gel from citrus juice. The juice prepared by press filtering of peeled citrus fruit contained 135.5 mg of total sugar/mL, 1.23% of total acid, and average pH of the juice was 3.98. The bacterium produced cellulose gel optimally on the surface of culture broth containing 17% of citrus juice and 10$^{\circ}$Brix of total sugar. The optimum temperature was 3$0^{\circ}C$ for producing acetic acid and gel formation. The bacterium could not produce acetic acid on gel formation at 4$0^{\circ}C$. The optimum pH was 3.0∼4.0 but was not significantly different between pH 3.0∼4.0. The cultivation for 18 days under optimal conditions produced gel as 14.2$\pm$0.6 mm of thickness and acids equivalent to 1.90$\pm$0.22% of acetic acid. The pH of culture broth was stabilized at 2.6∼2.8 during the cultivation. Remaining sugar content was 27.1$\pm$4.2 mg/mL of total sugar and 6.9 mg/mL of reducing sugar. The gel productivity was 137.8$\pm$9.7 g/L.

• Journal of the Korean Society of Radiology
• /
• v.9 no.5
• /
• pp.295-300
• /
• 2015

There are various type of particle accelerators such as Kyoungju 100-MeV proton beam accelerator in Korea. And Korea plans to build large particle accelerator such as heavy ion accelerator and 4th generation light source facility. The accelerated high energy particles of these facility produce 2nd neutron after nuclear reaction with target materials. And then these 2nd neutron activate structural materials and surrounding environment. Accordingly, it is important to consider the activation and shielding calculation on design of facility for safety operation. In this study, we tried to calculate and compare the neutron flux from the interaction $^{la}150$ beam with target material(Cu) according to thickness of iron and concrete shielding material by MCNPX 2.7 with nuclear library JENDL/HE 07and la150. To verify the properties of nuclear library, we compared computational results with experimental value. These results can be used for dose evaluation technology in planning of the shielding of large particle accelerator.

• Proceedings of the Korean Society of Organic Agriculture Conference
• /
• 2002.12a
• /
• pp.58-73
• /
• 2002

지방산을 이용한 살충비누의 제조와 이를 이용한 해충의 환경친화적 방제연구를 수행하였고 그 내용을 요약하면 다음과 같다. 1. 각 지방산의 중화가(Acid value)를 기준으로 비누화에 필요한 수산화칼륨의 투입량을 결정할 수 있었으며, 야자지방산의 경우 중화가가 266.3mg KOH/g으로 지방산 1kg당 수산화칼륨 266g이 필요한 것으로 나타났다. 2. 25%의 비누 함량이 되게 제조하기 위해서 지방산별 반응식을 조사하였고, 이에 따라 물의 첨가량을 결정할 수 있었으며, 야자지방산을 이용한 25% 살충비누의 제조에는 지방산 1kg에 수산화칼륨 266g과 물 3.459 ${\ell}$ 가 소요되고 제조된 비누액은 4.644 ${\ell}$인 것으로 나타났다. 또한 사용하는 물은 연수를 이용하여야 하였다. 3. 25% 제조된 살충비누의 물성을 조사한 결과 젤리상의 올레인산 비누를 제외하고는 점도가 낮은 액상이었으며, 산도는 알카리성으로 25% 야자지방산의 경우 pH 9이상으로 나타났다. 또한 50% 이상 고농도의 살충비누를 제조하면 냉각 후 젤리상태가 되어 희석하여 이용하는데 불편하였다. 4. 살충비누 제조공정의 요인으로 반응온도는 중탕방식으로 90$^{\circ}C$이상, 교반속도는 60 ${\sim}$ 120 rpm. 반응시간은 30분 이상이 양호한 것으로 나타났다. 5. 살충비누제조 공정은 중탕, 교반 가능한 반응기를 활용하여 (1) 수산화칼륨 수용액 제조 및 가온(90$^{\circ}C$) (2) 지방산 투입 (3) 30분이상 교반 반응 (4) 냉각을 통해 제조할 수 있었다. 6. 고추진딧물의 포장 방제가 조사시험결과 모든 지방산에서 살충효과를 나타냈으며, 지방산의 탄소수가 낮을수록, 살포 농도가 높을수록, 살포회수가 증가할수록 방제가가 높은 경향이었다. 7. 25% 야자지방산의 경우 50배에서 5일간격 2회처리 후부터 고추에 발생하는 진딧물에 대한 방제가가 92%이상이 되었으며, 100배액에서는 5일간격 3회처리 후부터 94%의 방제가를 나타내었다. 8. 양배추의 복숭아진딧물에 대한 25% 야자지방산 살충비누 50배액의 살포결과 1회 처리후 95%이상, 2회 처리후 100%에 가까운 방제가를 나타냈다. 9. 강낭콩의 점박이응애에 대한 25% 야자지방산 살충비누 50배액, 100배액 살포결과 2회처리 후부터 거의 100%에 가까운 방제효과를 보였으며, 알에 대한 부화억제효과도 인정되었다. 10. 효과증진제 첨가 실험결과 이소프로필알콜 0.1%이상 첨가 살포에서 2회처리시에 약간의 살충력 증진 효과를 보였으며, 규조토 첨가는 효과가 없는 것으로 나타났다. 11. 노지재배 고추의 약해검정결과 25%카프릴산비누 50배액을 제외하고는 약해가 발생하지 않았으며, 25% 카프론산 비누의 100배액은 고추 유묘기에 약해를 나타내었다. 양배추에서는 25% 카프릴산 비누 100배액에서 약해를 보였으나, 25% 야자지방산의 경우 50 ${\sim}$ 100배액 어디에서도 액해를 보이지 않았다. 별도로 적용한 시험에서, 토마토의 경우에도 25% 야자지방산 비누 50 ${\sim}$ 100배액 모두 약해를 발생하지 않았으나, 오이에서는 25% 야자지방산 비누 100배액에도 약해를 나타내었다. 12. 이상의 결과, 천연지방산을 이용하여 유기농업에 허용되는 각종의 살충비누를 제조할 수 있었으며, 방제가 조사결과 진딧물, 응애 등 껍질이 연약한 곤충의 방제에 효과적인 것으로 나타났다. 따라서 제조된 살충비누를 활용하면 환경친화적인 해충방제가 가능하다고 판단되었다.