• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.5
• /
• pp.631-639
• /
• 2013

The removal of phosphate from surface water is becoming increasingly vital to prevent problems such as eutrophication, particularly near urban areas. Recent requirements to reduce high concentrations of phosphate rely on physicochemical methods and adsorbents that must be effective even under strict conditions. The phosphate removal efficiencies of two adsorbents, Fe-Mn-Si oxide and Fe-Mn oxide, were investigated and the data used to compare kinetics and isotherm models. The maximum adsorption capacities of the two adsorbents were 47.8 and 35.5 mg-$PO{_4}^{3-}/g$, respectively. Adsorptions in both cases were highly pH dependent; i.e., when the pH increased from 3 to 9, the average adsorption capacities of the two adsorbents decreased approximately 32.7 % and 20.3 %, respectively. The Freundlich isotherm model fitted the adsorption of Fe-Mn-Si oxide more closely than did the Langmuir model. Additionally, anionic solutions decreased adsorption because of competition with the anions in the adsorbing phosphate. Although affected by the presence of competing anions or a humic substance, Fe-Mn-Si oxide has better adsorption capacity than Fe-Mn oxide.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.149-149
• /
• 2023

미세플라스틱은 입자크기가 5 mm 이하인 플라스틱으로 정의되며, 수계로 유입된 미세플라스틱은 내분비계 교란물질로 작용하여 생태계에 환경독성을 유발하고 오염물질을 흡착·운반할 수 있는 독성 물질의 매개체로서 미세플라스틱의 위해성에 대한 우려가 증가하고 있다. 본 연구는 수용액에서 다양한 미세플라스틱의 납(Pb) 흡착특성을 평가하고 미세플라스틱의 비표면적에 따른 흡착 효과를 비교하고자 하였다. 플라스틱 종류 중 HDPE (High-density Polyethylene)와 PVC (Polyvinyl Chloride)를 각각 세 가지 크기(Group 1: 2.5 mm - 1.0 mm, Group 2: 1.0 mm - 0.3 mm, Group 3: < 0.3 mm)로 제조하여 분류하였으며, 미세플라스틱 입자크기의 비표면적은 BET(Brunauer, Emmett, Teller)분석을 통하여 측정하였다. 담수환경 조성을 위해 pH 7로 조절한 Pb 용액의 농도(0, 0.5, 1, 5, 10, 30 mg/L)별 흡착실험을 수행하였으며 실험결과를 3가지 흡착등온식(Langmuir, Freundlich, Sips 모델)을 사용하여 미세플라스틱에서 Pb 흡착 거동을 나타내었다. BET 분석 측정결과, PVC의 경우 Group 3 > Group 2 > Group 1 순으로 PVC의 입자크기가 작을수록 비표면적이 크게 나타났으며, HDPE 비표면적 또한 비슷한 경향을 보였다. HDPE와 PVC에서 Pb의 흡착은 Langmuir 모델(R² > 0.97)과 Freundlich 모델(R² > 0.82)보다 Sips 모델(R² > 0.98)이 흡착 거동을 설명하기에 가장 적합하였다. 최대흡착능(Q_m) 상수는 입자크기가 작아질수록 흡착능이 높아지는 추세를 보였으며, 흡착세기(K_F)와 흡착강도(n^-1)는 각 플라스틱의 Group 3(HDPE K_F = 0.028, PVC K_F = 0.032; HDPE n^-1 = 0.225, PVC n^-1 = 0.547)에서 가장 높게 나타났다. 본 연구를 통해 HDPE와 PVC에서 Pb의 흡착특성은 Sips모델로 설명이 가능했으며, 이에 따라 Pb 흡착과정에 복수의 흡착메커니즘이 작용하고 있음을 유추해볼 수 있었다. 미세플라스틱의 입자크기와 비표면적이 Pb 흡착량에 영향을 미치는 것을 알 수 있었으며, 미세플라스틱이 중금속을 흡착하여 생물체 내로 전이시킬 수 있는 매개체 역할의 가능성을 확인하였다.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.811-817
• /
• 2003

Recently, application fields of non-metallic minerals by utilizing their structure properties are broadening. Especially, layered minerals have not only excellent shielding or covering ability but also absorbing and storing characteristics of chemical elements between a layers. We considered about the above mentioned characteristics and added functional substances onto their surfaces for the preparation of new environmentally friendly functional materials. In this study, natural graphite and sericite were mainly used to produce for the new environmentally friendly functional building materials. Graphite surfaces were modified with a surfactant (Alkyl Benzyle Demethyle Ammonium Chloride) for anti-bacillus and penicillium. Surface modification mechanism are that primary adsorption by differential zeta potential between graphite and ABDM and secondary adsorption by interaction between surfactant chains take place. Surfactant layers were fully formed and it was expected up to 99.7% up the efficiency of anti-bacillus and penicillium. Also the prepared functional samples have a effect to improve a various efficiency such as electromagnetic wave shield(up to 95%), deodorization(up to 80%), heat storage(5%) etc.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.173-180
• /
• 1996

The contamination of the environment by heavy metals results in a serious public health problem due to the toxicity of those pollutants even at low concentrations. Microorganisms may be used to remediate wastewaters contamlialtd with heavy metals. The waste S. cerevisiae is an inexpensive readily available source of biomass for bioremediation of wastewater. S. cerevisiae was investigated for their ability to absorb Pb. The crushed biomass of S. cerevisiae exhibited higher Pb uptake capacity than the living S. cerevisiae and the sterilized S. cerevisiae. At the same metal concentration, metal uptake per unit concentration or adsorbent decreased when the biomass concentration rises. The order of the biosorption capacity of the living S. cerevisiae was Pb>Cu>Cd=Co>Cr. When S. cerevisiae was pretreated with 0.1 M NaOH, Pb uptake was increased by 150 percent and 0.1 M HC1, 0.1 M $H_2S_O4$ solutions were efficient in the desorption of Pb. The sorption equilibrium of Pb ions can be described by the Freundlich and Langmuir models.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.285-294
• /
• 1994

Some supported gold catalysts were prepared by impregnation and coprecipitation methods. Effect of gold addition and active sloe formation were studied by investigating particle sizes of gold, amounts of oxygen adsorbed, adsorption properties of CO and NO, and reduction and oxidation properties, etc.. The gold particles of the catalyst by impregnation were irregular and very large as 30~100 nm, but those by coprecipitation were uniform and ultra-fine as about 4 nm. On $Au/Al_2O_3$ catalyst, the addition of gold to inactive $Al_2O_3$ caused the decomposition of $N_2O$, and CO was not irreversibly adsorbed while $O_2$ was atomically and irreversibly adsorbed. The adsorption sites of oxygen were attributed to the active sites which were restricted to the circumference of hemispherical gold particle-support interface rather than all atoms on the surface of gold particle. Also, CO was reversibly and irreversibly adsorbed on $Al_2O_3$ at low temperature, and the addition of gold weakened both reversible and irreversible adsorptions. The affinity for CO on $Au/Co_3O_4$ catalyst decreased conspicuously compared to $Co_3O_4$. The effect of gold addition did not appear in reduction step but did remarkably in reoxidation step; the added gold promoted the reoxidation of the reduced cobalt atoms.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.6
• /
• pp.995-1002
• /
• 2000

In order to Develop a low Na functional kimchi using sea tangle, the Na-binding capacity of alginate in sea tangle along with other dietary fibers was evaluated in vitro. The adding type and amount of the sea tangle that contains alginate in kimhi and characteristics of the sea tangle added kimchi were also studied. Na-binding capacity of various dietary fibers such as cellulose, pectin, gun gum, carageenan, alginates (sodium alginate, alginate, alginate from sea tangle) was measured by equilibrium dialysis method in pH 2 and pH 7 in vitro. Gua gum, carageenan and a group of alginates effectively bound to Na+ Espacially sodium alginate showed high Na-binding capacity of 29.2% in pH of stomach (pH 2.0) and 33.8% in pH of small intestine (pH 7.0), however, the alginate extracted from sea tangle could not bind Na in PH of stomach (pH 2.0), but 27.4% in pH of small intestine (pH 7.0) condition. The content of alginate in sea tangles (dried sea tangle, salted sea tangle and washed salted sea tangle) was 19.8 ~ 22.2% on dry matter basis. The sea tangle added kimchi was prepared with the addition of the flake type (0.5$\times$3 cm) of sea tangle with a quantity of 30% in kimchi from the data of the sensory analysis. The addition of the sea tangle to the kimchi increased the content of soluble dietary fiber, suggesting the Na-binding capacity increased. The sea tangle added kimchi (SK) and sea tangle and fermented anchovy added kimchi (SAK) showed higher levels of reducing sugar and acidity than the control kimchi (CK). In quantitative descriptive analysis (QDA) SK and SAK showed higher score in overall acceptance, and lower score in acidic order than CK, however, SK showed less moldy taste and more fresh acidic taste than SAK.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.384-387
• /
• 2006

수소 스테이션에서 사용할 수 있는 Compact 형 수소 PSA를 연구하였다. 기존의 수소 PSA 가 수소 스테이션에서 공간적 제약이 있기 때문에 그 부피를 줄이면서, 또한 효율을 높이기 위해 Compact형 수소 PSA를 고안하였다. Compact형 수소 PSA는 하나의 bed안에 다른 하나의 bed를 넣음으로써 시스템이 차지하는 부피를 줄이는 한 건, inner bed와 outer bed 사이의 열교환 효과가 나타나기 때문에 그 효율을 높일 수 가 있다. 흡착탑의 동특성을 파악하기 위하여 4성분 (H2/CO2/CH4/CO, 69:26:3:2 vol. %)의 가스를 Feed rate 7LPM, Adsorption Pressure 9atm의 조건으로 실험을 하였다. Inner bed와 outer bed의 흡착 동특성의 차이를 알아보고, PSA 공정을 가상으로 하여 각각의 탑에서 흡착과 탈착이 동시에 일어날 때의 동특성도 알아보았다. 그리고 AD step time을 달리 하면서 PSA 공정에 알맞은 Sequence을 알아보았다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.3
• /
• pp.48-54
• /
• 2009

Resent research on heavy metal biosorption has been focused on its mechanisms and principles. For effective metal removal/recoverythe process design has to be optimized for every type of application. That is most efficiently carried out based on computer simulations by means of mathematical models of the process. Therefore, the study on sorption equilibrium isotherm is important and the methodology wassummarized here involving both one metal and multi-metal systems.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.05b
• /
• pp.86-91
• /
• 1997

지르칼로이는 피복관으로 우수한 성질을 갖고있으나 고온에서 수증기와 발열반응을 일으켜 원자로의 안전성을 떨어뜨리는 단점을 가지고 있다. 사고시 1차 계통수에 함유된 수산화 리튬이니 붕소산은 지르칼로이에 흡착되어 산화에 영향을 줄 수 있다. 본 연구에서는 고온 수증기중의 지르칼로이 산화의 정확한 기술에 대한 연구를 수행하였으며 흡착물의 영향에 대한 실험을 수행하였다. 지르코늄 산화막이 단사정으로 존재하는 온도구간($650^{\circ}C$-105$0^{\circ}C$)에서 지르칼로이의 기존의 자료를 기반으로 계산 모형을 설정하였고 계산결과 Baker-just의 실험식은 상당히 보수적임을 알 수 있었다. 수산화리튬이 흡착된 시편은 1기압 고온 수증기중에서 산화시 푸른 간섭무늬의 막이 생성되어 산화가 억제되었다. 붕소산과 리튬의 혼합용액을 흡착한 시편은 푸른 간섭무늬의 막이 생성되지 않았으며 아무것도 흡착하지 않은 시편과 산화속도가 거의 같았다 고온 산화에서 열충격은 산화막의 균열을 발생하게 하여 산화가 가속되게 하고 지르칼로이의 기억효과를 상실케 한다.

• Clean Technology
• /
• v.27 no.2
• /
• pp.160-167
• /
• 2021

This study investigated the environmental effects of improving the general-type activated carbon adsorption tower used at the Sihwa/Banwol Industrial Complex with use of a cartridge-type activated carbon adsorption tower for the application of an activated carbon co-regenerated system. Four general-type activated carbon adsorption towers and two cartridge-type activated carbon adsorption towers were selected to analyze the properties of activated carbon and to compare the efficiency of reducing environmental pollutants. The results showed that the activated carbon used in the cartridge-type activated carbon adsorption towers was high quality activated carbon with an iodine adsorption force of more than 800 mg/g and that a good adsorption performance was maintained within the replacement cycle. From an analysis of the environmental pollutant reduction efficiency, it was confirmed that the cartridge-type activated carbon adsorption tower functioned properly as a prevention facility for handling emissions pollutants with a treatment efficiency of total hydrocarbons (THC), toluene, and methylethylketone (MEK) components of 71%, 77%, and 80%, respectively. The general activated carbon adsorption tower, which was confirmed to use low-performance activated carbon, had a very low treatment efficiency and did not function properly as a prevention facility for dealing with emission pollutants. It is believed that it is possible to reduce pollutants during operations by changing from the general-type activated carbon adsorption tower to a cartridge-type activated carbon adsorption tower.