• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.30-36
• /
• 2008

In this study, raw ginseng produced by different method; was puffed and the absorption characteristics of the puffed ginseng powders were investigated Raw ginseng preparations, including white ginseng lateral root (WGL), red ginseng lateral root (RGL) and red ginseng main root (RGM) with 15 % moisture were puffed at a pressure of $7kg_f/cm^2$. The equilibrium moisture contents of puffed powders were affected by temperature and water activity. The monolayer moisture content determined by 1he BET equation was 0.034-0.045g $H_2O/g$ solid. The $R^2$ parameter of 1he BET equation was higher than that of the GAB equation. The absorption enthalpies, calculated using various water activities, showed a decreasing trend with increasing water activity. Amongst models applied for predicting equilibrium moisture content, 1he Kuhn model was 1he best fit for puffed ginseng powders, giving 1he lowest prediction deviation of 2.83-8.65% The prediction model equation for water activity included 1he variable of time, water activity (RH/l00) and temperature, whereas an equation featuring the parameters of time and water activity was the best model equation identified.

• Food Science and Preservation
• /
• v.21 no.3
• /
• pp.334-340
• /
• 2014

The moisture sorption isotherms of corn powder prepared from corn kernels roasted for 20 min at 160, 180, 200, 220, and $240^{\circ}C$ were determined at $20^{\circ}C$ using the static gravimetric method over the range of water activities ($a_w$) of 0.11~0.90. The moisture sorption isotherms showed a typical sigmoid shape, and the equilibrium moisture content tended to increase with increasing $a_w$, and increased sharply at above 0.75 $a_w$. At above 0.53 $a_w$, the equilibrium moisture content of the roasted corn powder increased with the increase in the roasting temperature. Six mathematical models (Bradley, Caurie, Halsey, Henderson, Kuhn, and Oswin) were used to fit the experimental data. The Oswin, Caurie, Henderson, and Halsey models were found to have suitability for describing the sorption curves, and the Oswin model was the best fit model for all the roasting temperatures. Concerning the monolayer moisture content, the Guggenheim-Anderson-Boer (GAB) equation showed high significance. The monolayer moisture content increased as the roasting temperature was increased, to 0.043 and 0.053 kg $H_2O/kg$ solids in the corn powder roasted at $180^{\circ}C$ and $240^{\circ}C$, respectively. These results suggest that the roasting temperatures of the corn kernels affected the moisture sorption characteristics ($20^{\circ}C$) of the corn powder.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.332-339
• /
• 2008

This study was performed to investigate the sorption characteristics and shelf-life of coated ascorbic acid Stability of ascorbic acid, which oxidizes easily during storage and processing, was achieved by applying a fluidized bed coating using Zein-DP and HPMC-FCC as covering materials. The monolayer moisture content calculated using the GAB equation showed a higher level of significance than when calculated using the BET equation. The fit to the isotherm curve was in the order of Halsey, Caurie, Oswin and Khun. The equilibrium relative humidity prediction model was established in terms of time and water activity, it had higher significance. The stability of the coated ascoribic acid during storage was investigated in terms of radical-scavenging activity, which decreased with increasing time of storage and was more affected at higher storage temperatures. The quality reduction rate constant (k) was calculated by a first-order reaction rate. The reaction rate constant increased with increasing storage temperature. The shelf-life of Zein-DP-coated ascorbic acid was estimated to be 45.83 days at 20C and 63.19 days at 10C, and the shelf-life for HPMC-FCC-coated ascorbic acid was estimated to be 28.84 days at 20C and 36.14 days at 10, the ascorbic acid was 24.52 days at $20^{\circ}C$ and 27.22 days at $10^{\circ}C$, respectively. Therefore, the fluidized bed coating effectively increased the stability of ascorbic acid.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1151-1158
• /
• 2013

Knowledge of the moisture sorption properties of a material is essential for optimal material development and analysis of the delamination failure caused by vapor pressure at the interlayer during the manufacturing process of integrated packaging devices. In this paper, both temperature dependent absorption and desorption properties according to temperature and humidity model are parameterized and the effects of water activities and temperature are discussed. The activation energy obtained from the parameterized diffusivity determines the acceleration factor for the equivalency of moisture sorption levels, which enables the effect of moisture diffusivity on the equivalent elapsed testing time required for evaluating the reliable life time to be estimated. The acceleration factor evaluated at the reliability testing standard of the flexible packaging module is exampled.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.162.2-163
• /
• 2003

두부는 특유의 질감으로 우리 민족의 주요부식이 되어온 전통식품으로서 국제적으로 잘 알려져있는 고단백식품이다. 두부의 원료인 대두는 전체단백질의 80∼90%를 차지하는 glycinin과 albumin등의 단백질 성분과 비단백 질소 화합물이 함유되어 있는데 가격이 저렴하면서 영양과 기능성이 우수하여 식육, 낙농제품, 계란단백질이 disulfide 결합, 수소결합 및 소수결합에 의해 응집되어 gel이 된 후 염농도 증가에 의해 침전되거나 산에 의해 등전점 (pH 4.2∼4.6)에서 침전되는 성질을 이용한다. 또한 두부는 80% 이상의 높은 수분함량 때문에 쉽게 변질되는 소지가 많으며 두부의 저장에 많은 한계성을 보이는 식품이기도 한다. 따라서 건조에 의한 식품의 저장은 식품내의 수분을 감소시킴으로써 용질의 상대적 농도를 높혀 식품내의 수분 활성도를 저하시켜 미생물 및 효소에 의한 부패나 변패 및 변질을 방지할 수 있다. 이에 본 연구에서는 두부의 안전저장과 유통을 위하여 열풍건조, 진공건조 및 동결건조에 따라 분말두부를 제조하고 수분흡습특성과 기존 모델식과의 적합성 및 평형수분함량의 예측모델을 구하여 분말두부의 활용성을 높이며 다른 분말식품에도 적용할 수 있는 기초자료를 제공하고자 하였다.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.292-301
• /
• 1997

In drying process, to minimize the quality degradation by improved drying process and pretreatment methods, carrots, cabbages and radishes were dried and rehydrated. Physico-chemical properties of product were analyzed to determine the optimum pretreatment method and drying models were applied to explain drying mechanisms. Microwave, steam and water were used prior to drying as blanching method. In consideration of physical properties, optimum treatment time was decided that microwave was 1 min, steam and water were each 10 min. Control, steam, water, microwave and osmotic dehydration were treated prior to drying as pretreatment individually, osmotic dehydration was lower than the other treatmemt in drying efficiency, but carotene content was higher than the others. The effect continued after rehydration. Ten panelists tested dried and rehydrated carrots. After rehydration, the quality of air dried product with osmotic dehydration was superior to freeze dried without treatment. The fittness of drying models were conducted in order to explain the mechanism of drying each process. Quadratic model was most fittable to explain during drying. However, in rehydration process, no fittable model was found.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.74-78
• /
• 2008

Desorption experiments were carried out on soybean (Taegwang) at 5, 15, 25, 35, $45^{\circ}C$ for moisture contents between 6.74 and 28.87%(db). The method employed was to measure the equilibrium relative humidity (ERH) of air in contact with the grain under static conditions, using an electronic hygrometer. The effects of temperature and moisture contents were investigated, and the measured values were fitted to the modified Henderson, the modified Chung-Pfost, the modified Halsey, the modified Oswin and the modified GAB model. The ERHs of soybean under the moiture content of 16.67%(db) decreased with an decrease in moisture content and temperature, but the ERH of the moisture content of 28.87%(db) material decreased with an increase of temperature. The modified GAB model was the best in describing the EMC/ERH of soybean.

• Korean Journal of Environmental Biology
• /
• v.35 no.2
• /
• pp.207-214
• /
• 2017

There is little information about the seed longevity of wild plants, although seed bank storage is an important tool for biodiversity conservation. This study was conducted to predict the seed viability equation of Agastache rugosa. The A. rugosa seeds were stored at moisture contents ranging from 2.7 to 12.5%, and temperatures between 10 and $50^{\circ}C$. Viability data were fitted to the seed viability equation in a one step and two step approach. The A. rugosa seeds showed orthodox seed storage behaviour. The viability constants were $K_E=6.9297$, $C_W=4.2551$ $C_H=0.0329$, and $C_Q=0.00048$. The P85 of A. rugosa seeds was predicted to 152 years under standard seed bank conditions. The P85 predicted by seed viability equation can be used as basic information for optimization of seed storage processes.

• Korean Journal of Food Science and Technology
• /
• v.20 no.5
• /
• pp.704-710
• /
• 1988

This study was, firstly, to investigate water holding capacity in terms of variation of moisture sorption isotherms of seasoned squid treated with sodium lactate, glycerol, propylene glycol, sorbitol, mannitol, sodium benzoate, potassium sorbate and calcium propionate, and secondly, the effect of humectant treatments on storage stability was studied. The criteria for storage stability was based on three quality factors, namely, lipid oxiations, color development by non-enzymatic browning reactions and lipid oxidation, and mold growth. The effect of humectants on equilibrium moisture content was in the following increasing order; mannitol < sorbitol < sodium lactate < propylene glycol < glycerol. The experimental data indicated that sodium lactate has, in practice, potentially positive effect on processing of seasoned squid. During the storage period of 60 days, TBA values increased in all samples tested as humectants concentrations increased up to 10%. However, in the range of 1-7% sodium lactate treatment, the degree of lipid oxidation, browning reactions and mild growth were not high enough to affect the quality of seasoned squid, when compared with conventionally manufactured ones.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.51-63
• /
• 1999

The effects of high filler loading technique on the reliability of epoxy molding compound (EMC) as a microelectronic encapsulant was investigated. The method of high filler loading was established by the improvement of maximum packing fraction using the simplified packing model proposed by Ouchiyama, et al. With the maximum packing fraction of filler, the viscosity of EMC wart lowered and the flowability was improved. As the amount of filler in EMC increased, several properties such as internal stress and moisture absorption were improved. However, the adhesive strength with the alloy 42 leadframe decreased when the filler content was beyond the critical value. It was found that the appropriate content of filler was important to improve the reilability of EMC, and the optimum filler combination should be selected to obtain high reliable EMC filled with high volume fraction of filler.