• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.277-283
• /
• 2006

Aqueous solution of sodium glycinate was checked as a suitable $CO_2$ absorbent from the flu gas in the thermal power plant. For this purpose, solubility, vapor pressure, latent heat of vaporization and thermal conductivity were determined for pure and aqueous solution of sodium glycinate. The solubility of sodium glycinate in the solvent, 25 g of $H_2O$, was increased with increasing the temperature and their relation was represented as a first order equation of y = 0.3471x + 20.993. The vapor pressure for 10 wt％ to 60 wt％ of aqueous sodium glycinate solution were determined and the latent heat of vaporization of each aqueous solution was calculated from measured vapor pressure using Clausius-Clapeyron equation. Besides, thermal conductivity of sodium glycinate powder was also determined and it was $1.0933kcal/m{\cdot}hr{\cdot}^{\circ}C$.

• Composites Research
• /
• v.16 no.2
• /
• pp.9-17
• /
• 2003

We have implemented a system of falling weight impact tester in order to evaluate the impact energy absorbing characteristics and impact strength of CFRP laminate plates. The absorbed energy of T-300 orthotropic composites is higher than that of quasi-isotropic specimen over impact energy 7J, but in case of using T700 fiber, much difference does not show. Also, absorbed energy of T-300 orthotropic composites, which are composed of the same stacking number and orientation became more than that of T700 fiber specimen however there was no big difference in case of quasi-isotropic specimens. Delamination area of impacted specimens was measured with ultrasonic C-scanner to find correlation between impact energy and delamination area. Delamination area and frequency responses were evaluated between impacted and unimpacted specimens. There is a strong correlation between frequency responses and impact-induced delamination. The presence and scale of damages have been investigated based on the variations of frequency responses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2966-2970
• /
• 2015

Recently, solar light power generation is widely extended by support policy to regeneration energy. However generation efficiency is decreased when solar module maintain higher than certain point temperature. Therefore, it is need to maintenance under certain point temperature. An method of solving this problem, this paper is developed geothermal exchanger for efficiency improvement of solar cell module. Geothermal exchanger consisted of heat absorber of solar cell module and heat conductor and radiator. Heat of solar cell module is radiated in the earth by geothermal exchanger. An a result, geothermal exchanger is increased generation amount of solar cell module and experiment result showed costs to about 36% increment of generation power.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.587-592
• /
• 2017

Uniform and optimum sized silver nanoplates were synthesized through the liquid phase reduction method by using silver nitrate solution as a starting chemical, dimethylformmide (DMF) as a reducing solvent, and polyvinylpyrrolidone (PVP) as reducing and surfactant agents. Synthesized and also film samples were characterized by using SEM, TEM, UV-Vis-NIR spectroscopy, particle size analyzer (PSA), and XRD. Triangle nanoplates with the size of 100~200 nm were found from the sample synthesized at $70^{\circ}C$ for 72 h using silver nitrate, DMF and 26 wt% PVP. The sample could reflect near-infrared light because it showed the maximum absorbing peak at about 1,000 nm. When the content or particle size of silver nanoplates increased in coating solutions, the transmittance decreased and the reflectance increased in film samples.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.483-491
• /
• 2011

The fabrication of steel structural members always involves welding process such as flux cored arc welding. Therefore, for the application of structural steels to cold regions, it is a prerequisite to clarify the service temperature of the welded joints in order to ensure the structural integrity of the welded parts. In this study, the Charpy impact test was conducted to evaluate the service temperature of structural steel weld. The Charpy impact test is a commercial quality control test for steels and other alloys used in the construction of metallic structures. The test allows the material properties for service conditions to be determined experimentally in a simple manner with a very low cost. Standard V-notch Charpy specimens were prepared and tested under dynamic loading condition. The service temperatures of the weld metal, HAZ (heat affected zone) and base metal were derived by the absorbed energy and the impact test requirements; thus the applicability of the structural steels to cold regions was discussed in detail.

• Journal of Energy Engineering
• /
• v.27 no.4
• /
• pp.20-26
• /
• 2018

As the global warming due to greenhouse effect has become serious problem, it is necessary to introduce the technology, for instance, such as diversity or saving of energy to reduce the use of fossil fuel. The purpose of this study was to investigate the characteristics on materials of absorption plate, unpowered and minimum use of power in cooling and heating combined device. As the results, it was observed that, in case of summer, since temperature of absorption device of solar heat(ADSH) was lower than that of no ADSH, cooling effect was insignificant in case of being not installed cold-reservoir. However, in case of winter, heating effect was certified even though the power was not used. At secondhand, the performance of ADSH with Cu was higher 2 times than that of ADSH with Al.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.800-801
• /
• 2011

최근 건강-의료 분야의 학과 신설 및 전공자가 급격하게 늘어남에 따라 해부학 교육의 질적 향성 및 학습자의 학습효과 증진을 도모하기 위해서는 새로운 강의방식의 도입이 필요하다. 따라서 본 연구는 해부학 교육에 있어 면대면 강의에 사용한 내용을 바탕으로 가상강의 컨텐츠를 자체개발하였고, 2007-2009년 간호학과 및 스포츠과학부의 전공필수 과목인 해부학 강의를 가상강의 방식으로 실시하였다. 이 과목을 수강한 2개 학과 231명을 대상으로 강의 종료 후 가상강의실 게시판 및 컨텐츠 활용 빈도, 개별 설문조사, 학기말 성적을 확보하여 가상강의실 활용도, 만족도 및 학업성취도 상호간의 상관관계를 분석하였다. 학생들의 만족도, 난이도, 흥미도, 평가의 적절성, 전공연계성 등에서 긍정적인 평가를 받았다. 또한 가상강의실의 로그인 횟수와 게시판에 대한 학생들의 만족도가 높게 나타났다. 학업성취도는 난이도 (r=0.411, p<0.01)와 높은 상관관계를 나타내었고, 만족도-흥미도(r=0.407, p<0.01), 만족도-전공연계성 (r=0.507, p<0.01), 흥미도-전공연계성 간에도 높은 상관관계를 보였으나 흥미도-전공연계성(r=0.474, p<0.01) 등에서 높은 상관관계를 나타내었다. 결론적으로 본 연구를 통해 건강-의료 분야의 전공자뿐만 아니라 다양한 분야에서 폭넓게 요구하고 있는 해부학 강의수요를 효과적으로 흡수함과 아울러 해부학교육에 있어 새로운 지평을 열수 있는 가상강의에 대한 연구로서, 향후 해부학 교육에 있어 충분한 활용가치가 있는 효과적인 교수법이 될 것으로 사료된다.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.393-404
• /
• 2020

This study examined the material properties of MDF manufactured using acetylated pinus radiata fibers against moisture and compared the properties with the fiberboard quality standards of KS F 3200. Since acetylated MDF shows very low moisture content, water absorption and thickness swelling than the quality standards, it is expected to have an excellent dimensional stability. The bending strength in wetting condition of the acetylated MDF reached approximately 70% of the bending strength in dry condition, making it suitable for the quality standards. The internal bond of the acetylated MDF in the wetting condition was higher than the minimum internal bond of the quality standards in the dry condition, showing a good water resistance. Since the water droplet contact angle of the acetylated MDF is larger than that of untreated MDF, it is determined that it contributes in improving the water resistance due to the low wettability.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1129-1136
• /
• 2010

Damper springs in a drive-line absorb the impulsive torque generated when a lock-up clutch is connected directly, instead of via a fluid coupling. Design optimization and finite element analysis were performed to improve the shock- and vibration-absorption capacity of the lock-up clutch. For this purpose, a multi-body dynamics model was developed by including the main parts of a vehicle, such as an engine with a clutch, a transmission, drive shafts and wheels, and a whole mass of a vehicle. The spring constants were selected so that resonance of a system could be avoided. Damper springs were optimized on the basis of the spring constants, impulsive torques, compressed angles, spring counts, fatigue constraints, etc. Topology optimization was performed for three plates with the damper springs. The compliance was set up as an objective function, and volume fraction was fixed below 0.3. A new shape for the plates was proposed on the basis of the topology result.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.4
• /
• pp.10-19
• /
• 2014

Despite the movement of safe traffic by the Korean government to reduce deaths in traffic accidents, the casualties increase year by year. In particular, more and more accidents and casualties are reported from car collisions from the back of the vehicles parked for managing traffic accidents on the road, cleaning main roads and medial strips, repairing roads. In order to response to these accidents, the government should take protective measures for road users. In the last decade, seventy-one cases have been reported to occur during highway repair and maintenance. As a result, eight persons were killed and seventy-six were injured, showing the high death rate of 11.3 percent. Therefore, it seems urgent to take some actions against it. The United States and European countries legislate that vehicles of road repair and maintenance should be mandatorily equipped with shock absorber at the back. Korea, however, does not have such legislative measures, which are needed at this time to protect workers on the road. This study compares the performance of the traditional shock absorber for road maintenance vehicles with that of the rear safety guard using air bag, manufactured in accordance with related laws in Korea. Based on the results of the 60km/h rear collision test, this paper proposes improvements in related laws and regulations in an attempt to reduce casualties.