• 유체기계공업학회:학술대회논문집
• /
• 2004.12a
• /
• pp.193-198
• /
• 2004

In general, the function of intake structure, whether it be a open channel, a fully wetted tunnel, a sump or a tank is to supply an evenly distributed flow to a pump station. An even distribution of flow, characterized by strong local flow, can result in formation of surface or submerged vortices, and with certain low values of submergence, my introduce air into pun, causing a reduction of capacity and efficiency, an increase in vibration and additional noise. This study investigated experimentally the formation of the vortex to understand the mechanism of vortex formation and to prevent the formation of vortex in the sump model using by the model test and PIV tool. Sump model was manufactured to 1/8 scale with the drawing of W intake pumping station. from the results of model test and PIV, the vortex were occurred the in the whole section. Thus, sump model tests with the anti-vortex device might be considered to prevent the formation of vortex in the sump model.

• Korean Journal of Clinical Pharmacy
• /
• v.8 no.2
• /
• pp.95-100
• /
• 1998

Piroxicam-$\beta$-cyclodextrin은 piroxicam을 $\beta$-cyclodextrin으로 포접시킨 비스테로이드성 항염증약물이다. 이러한 포접형 약물은 위장관에서의 흡수속도가 증가하는 것으로 외국자료에서 보고되고 있으며 이는 이 약물의 위장관 내성에 보다 나은 영향을 끼칠 수 있음을 시사하고 있다. 본 연구는 정상성인 한국인을 대상으로 randomized, crossover design에 의해 piroxicam-$\beta-cyclodextrin(Brexin^{(R)})$과 piroxicam 확산정$(Feldene^{(R)})$ 흡수속도를 비교하고자 하였다. 건강한 성인 8명의 피험자를 2군으로 나누어 시험약 또는 대조약을 각각 20 mg씩 20일의 휴약 기간을 두고 이중 맹검으로 교차 투여하였다. 시험약 또는 대조약의 투여 후 24시간 동안 일정 간격으로 채혈하여 HPLC 방법으로 혈장 내 piroxicam 농도를 측정하였다. $AUC_{0-24}\;({\mu}g/mL)$는 piroxicam-$\beta$-cyclodextrin군에서 $56.1\pm4.9$, piroxicam군에서 $57.3\pm5.6$으로 통계적인 유의성이 없었으나, 투여 후 0.5시간에서의 혈중농도는 piroxicam-$\beta$-cyclodextrin군 $2.9\pm0.4\;{\mu}g/mL$, piroxicam군 $1.6\pm0.3\;{\mu}g/mL$으로 통계적인 유의성을 보였다(p<0.05). 또한 최고혈중농도는 piroxicam-$\beta$-cyclodextrin$(4.3\pm0.5\;{\mu} g/mL)\;piroxicam(3.5\pm0.3\l{\mu}g/mL)$,으로 유의성이 있었으며(p<0.05), 흡수 속도상수는 piroxicam-$\beta$-cyclodextrin$(3.00\pm0.49\;h^{-1}), \;piroxicam(1.80\pm0.21\;h^{-1})$이었다(p<0.1). 이상의 결과에서, piroxicam-$\beta$-cyclodextrin정은 piroxicam 확산정과 비교하여 흡수되는 정도는 서로 비슷하지만 흡수 초기의 혈장농도 및 흡수속도상수에서 보다 빠른 약동학적 특성을 나타내었다.

• Journal of the Korean Magnetics Society
• /
• v.19 no.4
• /
• pp.152-155
• /
• 2009

Ba-Ferrite single crystals were prepared and the magnetic and thermal properties were characterized by Mossbauer spectroscopy. The single crystal layer was cut in the c-axis and radiated to the surface by ${\gamma}$-rays for Mossbauer spectroscopy. We found out that the spin states in Fe ions were parallel to the ${\gamma}$-rays direction and the whole crystal bulk formed only one crystal with the same spin direction. $M\"{o}ssbauer$ spectra in single crystal have only 4 sets of 4 absorption lines in each Fe site when the ${\gamma}$-rays have the same radiation direction with the c-axis in the crystal, and there was no 2b-site spectrum. The zero absorption of 2b-site means that there was a fast diffusion motion in a double-well atomic potential at room temperature, in which bipyramidal Fe ions have the two minima at each side mirror plane.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.264-267
• /
• 2000

본 논문에서는 이동국의 안테나로부터 방사되는 전파의 일부가 인체에 흡수되므로써 기지국에서 수신되는 E$_{b}$ N$_{t}$의 감소에 대해 조사하였고, 감소된 E$_{b}$ N$_{t}$를 기준으로 하여 전파의 인체 흡수가 DS/CDMA BPSK 시스템의 성능에 미치는 영향을 분석하였다. 분석 결과, 인체에서의 흡수가 30[%]에서 40[%]로 증가할 때 기지국에서의 E$_{b}$ N$_{t}$, 값이 약 0.5 [dB] 정도 감소함을 알 수 있으며, 40 [%]에서 50[%]로 중가할 때에는 약 0.6 [dB] 정도 감소함을 알 수 있었다. 또한 시뮬레이션을 통해 사용자 수가 15 명일 때 약 2.5 [dB]의 E$_{b}$ N$_{t}$ 값에서 음성 서비스가 가능하다는 것을 알 수 있었다. 그리고 이러한 E$_{b}$ N$_{t}$ 값을 만족시키려면, 흡수율이 10 [%] 증가 할 때마다 안테나 방사 전력을 약 20 [mW] 이상 증가시켜야 한다는 것도 알아내었다. 것도 알아내었다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.246-247
• /
• 2000

Yb$^{3+}$ 이온은 InGaAs LD 및 Ti:sapphire 레이저로 펌핑할 수 있는 940 nm에서의 흡수대를 가지고 있고, 1.03 $mu extrm{m}$의 형광방출 특성을 가지고 있으며, 지금까지 알려진 1 $\mu\textrm{m}$ 파장대의 레이저 활성이온 중에서 가장 적게 열을 발생하는 특성을 가지고 있음이 알려져 최근에는 Yb$^{3+}$ 이온을 첨가한 여러 가지 레이저 매질이 연구되고 있다.[1] 그 중에서도 Yb$^{3+}$ ion doped yttrium aluminum garnet (Yb:YAG) 단결정은 충분하게 넓은 흡수선폭, 좋은 열광학적 특성, 고출력 작동을 하게 하는 stokes shift, 그리고 LD에 의한 펌핑을 가능하게 하는 940 nm 영역에서의 흡수 및 긴 여기시간을 가진 이상적인 매질로 알려져 있다.[2] 이러한 특성으로 인해 Yb:YAG 단결정은 femtosecond 레이저 등 각종 레이저 시스템의 소형화[3]를 가져왔으며, 레이저 결정의 양산 가능성 및 레이저 기기의 소형화에 따르는 시스템의 가격 감소가 가능하므로 Yb:YAG microchip 레이저는 향후 고출력 레이저 기기 산업의 중추가 될 것으로 기대된다. (중략)

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.43-51
• /
• 2004

In order to decommission the shielding concrete of KRR(Korea Research Reactor) -1＆2, it must be exactly determined activated level and range by neutron irradiation during operation. To determine the activated level and range, it must be sampled and analyzed the core sample. But, there are difficulties in sample preparation and determination of the measurement efficiency by self-absorption. In the study, the full energy efficiency of the HPGe detector was compared with the measured value using standard source and the calculated one using Monte Carlo simulation. Also. self-absorption effects due to the density and component change of the concrete were calculated using the Monte Carlo method. Its results will be used radioactivity analysis of the real concrete core sample in the future.

• The KSFM Journal of Fluid Machinery
• /
• v.12 no.4
• /
• pp.14-22
• /
• 2009

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite basin with no close walls or floors and with no stray currents. Therefore, flow into the pump intake is with no vortices or swirling. However, pump station designers relying on these curves to define the operating conditions for the pump selected sometimes meet the reductions of capacity and efficiency, as well as the increase of vibration and additional noise, which were caused by air-entered flow in the pump station. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump of pump station model. Multi-intake sump model with anti-submerged vortex device basin is designed and the characteristics of submerged vortex is investigated in the flow field by numerical simulation. In this study, a commercial CFD code is used to predict the vortex generation in the pump station accurately. The analysed results by CFD show that the vortex structure and effect of anti-submerged vortex device are different at each pump intake channel.

• Korean journal of food and cookery science
• /
• v.13 no.1
• /
• pp.40-46
• /
• 1997

This study was conducted in order to determine the effect of preparing conditions(refrigerating and freezing of dough, dough size, frying temperature, kneading degree and ingredient amount) on the dehydration, absorbed oil content and sensory characteristics of Yackwa. There were no significant differences on the dehydration, absorbed oil content and sensory characteristics between the control Yackwa and those prepared by refrigerating and freezing of dough. In the dough size (large, medium, small), dehydration and absorbed oil content was increased as the size became smaller. It was shown that overall acceptability was high in medium size Yackwa. There were no significant differences on the dehydration of Yackwa under various frying temperature and kneading degree. On the other hand, absorbed oil content of Yackwa was decreased as the frying temperature became higher and kneading degree increased. Dehydration of Yackwa was increased as the amount of sesame oil, honey and sozu increased. There were no significant differences on the absorbed oil content of Yackwa as the amount of sesame oil increased. The absorbed oil content was increased as the amount of honey increased, whereas the absorbed oil content decreased as the amount of sozu increased. Shininess, softness, brittleness and oily taste was increased as the absorbed oil content increased in sensory evaluation of Yackwa prepared by different frying temperature, kneading degree and ingredients amount. It was shown that above preparing conditions affected the absorbed oil content and sensory characteristics of Yackwa.

• Journal of the Korean Institute of Gas
• /
• v.2 no.4
• /
• pp.47-52
• /
• 1998

Water vapor absorption performance of four components solution ($LiBr+LiNO_3+LiC1+H_2O$) which could be substituted for commonly used $LiBr/H_2O$ solution in water cooled abosorption chiller is tested using a vertical tube absorber. Inlet solution concentration, inlet solution temperature, solution flow rate and inlet temperature of cooling water is varied as experimental parameters. The results of the experiment of water vapor absorption performance show that four components solution should have $2\%$ higher concentration for equal absorption capacity of $LiBr/H_2O$. But considering that four components solution have higher solubility than LiBr solution about $3\%$ high oncentration, four components solution ($LiBr+LiNO_3+LiC1+H_2O$) have more absorption capacity than LiBr solution in actual absorption chiller and can be applied to a small or air cooled absorption chiller.

• Proceedings of the KAIS Fall Conference
• /
• 2007.05a
• /
• pp.28-31
• /
• 2007

자동차 측면충돌시 인체의 상해를 줄이기 위하여 도어 시스템 부품 중에 도어트림이 충격을 차단하고 인체를 보호하는 역할을 하고 있다. 차체 판넬이 변형되어 도어트림에 전달되는 충돌 에너지를 패드가 흡수 하는데 중대한 기능을 한다. 이전에 충격흡수 패드는 외곽부위의 수평면에 의존하여 설계되었으며 이 구조는 점진적으로 충격을 흡수 하는데 문제점이 발견 되었는데 트리즈의 6단계 창의성 기법을 적용하여 패드의 주요 특성을 찾아내고 그 특성에 모순을 해결하여 차종에 적용할 수 있는 기본 단면과 설계 자유도가 높은 충격흡수부재를 개발 하였다.