• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1383-1389
• /
• 2011

The current study focuses on the consistent analysis of heat transfer in multichannel volumetric solar receivers used for concentrating solar power. Changes in the properties of the absorbing material and channel dimensions are considered in an optical model based on the Monte Carlo ray-tracing method and in a one-dimensional heat transfer model that includes conduction, convection, and radiation. The optical model results show that most of the solar radiation energy is absorbed within a very small channel length of around 15 mm because of the large length-to-radius ratio. Classification of radiation losses reveals that at low absorptivity, increased reflection losses cause reduction of the receiver efficiency, notwithstanding the decrease in the emission loss. As the average temperature increases because of the large channel radius or small mass flow rate, both emission and reflection losses increase but the effect of emission losses prevails.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.176-177
• /
• 2003

초고속,대용량,유-무선 통합 등의 광 통신 시스템 발전 요구에 따라 광 검출기는 점점 더 초고속,고출력의 사양을 요구 받고 있다. 기존 광소자의 일반적인 광 검출기구조에서는 속도와 효율이 서로 상반되어,40GHz이상의 속도와 고효율을 모두 얻기가 매우 어려우므로, 이를 해결하기 위하여 수동 광도파로가 집적된 광 검출기가 필요하다. 도파로형 광 검출기는 일반적으로 잘 알려져 있는 구조이지만 입사광을 수용하고, 광의 크기를 조절하여 광 흡수층에 제대로 전달하기 위해서는 광 도파로 및 구조에 대한 연구가 필요하다. (중략)

• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.165-172
• /
• 1998

본 연구에서는 종이 충격흡수의 효율적인 기하형상이 연구되었다. 일반적으로 충격흡수재는 골판지, 스폰지, 종이, 고무등으로 제작된다. 에너지 흡수거동에 대한 종이 충격 흡수재의 보강형태, 크기., 재료 특성에 대한 영향이 ABAQUS/Explicit5.5에 의한 유한요소 해석과 미끄럼 충격시험을 통해 연구되었다. 종이 충격 흡수재의 최대 변위는 충격속도에 따라 증가하며, 내부단수에 따라 감소하였다. 충격이력 특성은 내부단수가 7단일 때 5 msee까지 급속히 변형되며, 그 이후에는 영구변형으로 존재한다.

• KSBB Journal
• /
• v.25 no.5
• /
• pp.421-428
• /
• 2010

This paper reports on the experimental investigation carried out to evaluate the physical optimal conditions in the absorption column to remove odorous hydrogen sulfide gas. Hydrogen sulfide gas, as a highly undesirable contaminant, is most widely emitted from environmental treatment facilities. The absorbent mixed with natural second metabolites extracted from conifer trees and chemical absorbent of 2-aminoethanol was applied to remove it via chemical neutralization. The absorbent of natural second metabolites was achieved by a removal efficiency of 20-40% by itself depending on the treatment conditions, but the complex absorbent mixed with 0.1% amine chemical provides the removal efficiency of 98%. The optimal removal efficiencies have been examined against the two major parameters of temperature and pH. This study shows that the aqueous solution by natural second metabolites can be used as an appropriate absorbent in the column absorbed for the removal of hydrogen sulfide gas.

• Bulletin of the Korea Photovoltaic Society
• /
• v.5 no.1
• /
• pp.7-15
• /
• 2019

최근 유기물과 무기물의 복합된 구조를 가지는 페로브스카이트 소재를 광흡수층으로 사용한 태양전지가 연구적으로 큰 관심을 받고 있다. 이러한 유무기 하이브리드형 페로브스카이트 소재는 기존의 광흡수 소재들에서는 발견되지 않던 독특한 광전기적인 특성과 이에 기인하는 고 광전변환효율 그리고 저렴한 박막제조 공정 등으로 인해 기존 차세대 태양전지의 한계에 돌파구를 제시하고 있다. 본 글에서는 이러한 고효율, 고안정성 페로브스카이트 태양전지 구현을 위해 사용되는 전하수송소재의 종류와 개발동향에 대해서 살펴보고자 한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.93-99
• /
• 2003

In this study, new shock absorbing system is proposed by using nano-technology based on the theoretical analysis. The new shock absorbing system is complementary to the hydraulic damper, having a cylinder-piston-orifice construction. Particularly for new shock absorbing system, the hydraulic oil is replaced by a colloidal suspension, which is composed of a porous matrix and a lyophobic fluid. The matrix of the suspension is consisted of porous micro-grains with a special architecture: they present nano-pores serially connected to micro-cavities. Until now, only experimentally qualitative studies of new shock absorbing system have been performed, but the mechanism of energy dissipation has not been clarified. This paper presents a modeling and theoretical analysis of the new shock absorbing system thermodynamics, nono-flows and energy dissipation. Compared with hydraulic system, the new shock absorbing system behaves more efficiently, which absorb a large amount of mechanical energy, without heating. The theoretical computations agree reasonably well with the experimental results. As a result. the proposed new shock absorbing system was proved to be an effective one, which can replace with the conventional one.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.353-362
• /
• 2005

태양열시스템은 하절기에 급탕과 난방 부하가 적거나, 거의 없어 시스템의 과열 문제가 야기 될 수 있다. 이를 해결하는 방안 중에 하나로 흡수식 냉방시스템을 이용하여 하절기 잉여열원을 활용하여 냉방하는 방법이 대두되고 있다. 태양열 냉방시스템은 전기에너지를 대체하는 효과 뿐 아니라 태양열 연간 이용 효율 극대화에도 크게 기여 할 수 있다. 본 고에서는 국내 기술로 최초로 개발 실용화된 중온용 단일 진공관형 태양열 집열기와 1중 효용 흡수식 냉방기를 이용하여 실증연구를 계획하였다. 태양열 냉방 실증을 위하여 단일 진공관형 태양열 집열기 집열면적 200m2, 축열조(태양열, 급탕, 냉수), 10RT급 냉방기, 냉각탑, 보조 보일러, 원격 제어 및 모니터링 등이 계획 되었다. 실증시험 중간 결과 태양열 냉방시스템은 하절기 맑은 날 하루 동안 약 5 - 6시간 안정적으로 가동 되었으며, 앞으로 온수급탕, 난방 시험을 거쳐 시스템 성능 및 경제성 평가를 통하여 유용성, 안정성 및 신뢰성이 검증 될 계획이다.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2001.11a
• /
• pp.44-45
• /
• 2001

VOCs의 일종인 benzene을 흡수하기 위한 최적의 세정액으로 열매체유를 선정하여, 충진탑(Packed Tower), 흡수칼럼에 세정액만 채워 bubble 시킨 기포탑(Aeration Tower)와 충진물과 세정액을 채워 bubble 시킨 Combined Packed & Aeration Tower의 3가지 시스템을 비교한 결과 Combined Packed 쇼 Aeration Tower 시스템에서 benzene 흡수효율이 가장 좋았다.

• Membrane Journal
• /
• v.16 no.3
• /
• pp.196-203
• /
• 2006

A flue gas emission known to cause an acid rain, containing sulfur dioxide, is tightly controlled by a regulation. The membrane contactor could be one of the alternatives which might be useful technologies for better performance of desulfurization. The fundamental sulfur dioxide separation data were obtained by a flat membrane contactor so that they could be utilized for the full scale membrane contactor. The separation of sulfur dioxide was measured in terms of the concentration of NaOH absorbent, the concentration of sulfur dioxide, the feed flow rate and different membrane materials. As the concentration of absorbent increased, the removal efficiency increased. By increasing the concentration of sulfur dioxide, the removal efficiency decreased. As the feed flow rate increased, it was observed that the removal efficiency decreased. Finally, the effect of the membrane material on separation was found to be negligible.

• Journal of Radiation Protection and Research
• /
• v.26 no.2
• /
• pp.51-58
• /
• 2001

In the low level radioactivity measurement, such as environmental radioactivity, there were used commonly cylindrical and Marinelli type beakers by means of measurement container. If there are differences in the matrix density or sample height between standard source and sample, it must be determined full energy peak efficiency considering self absorption effect. In this paper, we compared measured efficiency with calculated full energy peak efficiencies in the HPGe detector using the Monte Carlo method. For cylindrical container, we calculated the variation of the efficiency with sample height. Also, we calculated the variation of the detection efficiency with apparent density in the cylindrical and Marinelli container. It was seen that it need to be corrected for self absorption in the energy range of below 1000keV. Also, in order to verify the validity of calculation, we compared the calculated value with reference value using NIST SRM 4353 reference soil.