• Title/Summary/Keyword: 흡수계수

Search Result 780, Processing Time 0.027 seconds

Homogeneous characteristics of CdSe quantum dots from absorption coefficient and its change (흡수 계수와 흡수 계수 변화 특성에 따른 CdSe 양자 구슬 구조의 균일성 조사)

  • Hwang, Young-Nam;Shin, Sang-Hoon;Park, Seung-han;Kim, Ung;Kim, Dong-Ho
    • Korean Journal of Optics and Photonics
    • /
    • v.8 no.2
    • /
    • pp.122-127
    • /
    • 1997
  • The hexagonal wurtzite structure of CdSe quantum dots are investigated by X-ray diffraction experiment. The absorption peaks due to quantum confinement effect are observed in the linear absorption spectra. Absorption coefficient changes at the lowest transition are measured with pump wavelength at the lowest transition and at the next higher transition from which direct intraband transition is not allowed. The measured larger absorption changes at the lowest transition confirm that the selection rules of intraband transition resulting from quantum confinement effect are satisfied. From the experimental results, therefore, we concluded that the CdSe quantum dots can be described as homogeneous system.

  • PDF

Optimization of Radar Absorbing Structures for Aircraft Wing Leading Edge (항공기 날개 앞전의 레이더흡수구조 최적화)

  • Jang, Byung-Wook;Park, Sun-Hwa;Lee, Won-Jun;Joo, Young-Sik;Park, Jung-Sun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.41 no.4
    • /
    • pp.268-274
    • /
    • 2013
  • In this paper, objective functions are defined for optimization of radar absorbing structures (RAS) on the aircraft wing leading edge. RAS is regarded as a single layer structure made of dielectrics. Design variables are the real and imaginary parts of complex permittivity. Reflection coefficient(RC) and radar cross section(RCS) are used in the objective function respectively. Transmission line theory is employed to calculate the RC. The RCS is evaluated by using physical optics(PO) for a leading edge part model. Genetic algorithm(GA) is used to perform optimization procedures. The radar absorbing performance of designed RAS is assessed by the RCS of a wing which has RAS on the leading edge.

Development of Testing and Analysis Model for Evaluation of Absorbed Water Diffusion into Concrete (콘크리트 흡수 수분확산계수 산정을 위한 실험 및 수치해석 모델 개발)

  • Park, Dong-Cheon;Ahn, Jae-Cheol
    • Journal of the Korea Institute of Building Construction
    • /
    • v.11 no.4
    • /
    • pp.371-378
    • /
    • 2011
  • Concrete is affected by various deterioration factors, such as $CO_2$ and chloride ions from the sea, which cause carbonation and salt attack on concrete. These deterioration phenomena cause steel corrosion in RC structures. Although a great deal of research has been carried out in this area thus far, it is difficult to know the point at which corrosion will occur to a reinforced bar. As the diffusion of deterioration factors depends on the water content in concrete, it is imperative to assess the condition of absorbed water content. A mass measuring method was applied to calculate the absorbed water diffusion coefficient, as well as non-linear finite element method(FEM) analysis. As a result, it was found that W/C and unit water content in concrete mixture affect the diffusion coefficient decision.

Nonlinear absorption mechenism of dithienothiophene. derivatives (Dithienothiophene(DTT) 유도체의 비선형 흡수과정 연구)

  • 최혜영;차명식;이종협;이광섭
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2003.02a
    • /
    • pp.26-27
    • /
    • 2003
  • 이광자 흡수가 큰 유기 화합물의 개발과 응용을 위해 이광자 흡수과정의 메커니즘을 이해하는 것은 매우 중요하다. 일반적으로 이광자 흡수를 측정하는 방법으로는 비선형 투과나 이광자 여기 형광을 측정하여 이광자 흡수계수를 구하는 방법이 사용되며, 많은 경우 측정에 사용된 레이저의 펄스 폭에 따라 다른 값을 보고하고 있다 본 연구에서는 7 ns와 35 ps-펄스 레이저에서 DTT 유도체의 비선형흡수를 측정하여 그 결과를 여기준위 흡수에 의한 이광자 흡수의 증가로 설명하였다. (중략)

  • PDF

A Study on the Absorption of Carbon Dioxide using PVDF/Plasma Membrane Contactor (PVDF/플라즈마 막접촉기를 이용한 이산화탄소의 흡수에 관한 연구)

  • Choi, Seung-Hak;Gao, Tongzhai;Oh, Sae-Joong
    • Korean Chemical Engineering Research
    • /
    • v.43 no.1
    • /
    • pp.161-169
    • /
    • 2005
  • Numerical simulation and experiments were carried out on the absorption of carbon dioxide using PVDF hollow-fiber membrane contactor. Water or monoethanolamine (MEA) aqueous soluton was used as absorbents. Simulation results showed that the concentration profile of carbon dioxide was less affected by the flow rate of MEA than that of water absorbent. The absorption rate and mass transfer coefficient of carbon dioxide increased as the concentration of MEA increased. The mass transfer coefficients obtained by experiments coincided with those obtained by numerical simulation and theoretical results for $CO_2-water$ system. However, for $CO_2-MEA$ system, the mass transfer coefficients obtained by experiments were lower than those obtained by simulation, while the simulation results agreed well with theoretical results. The durability of plasma-treated hollow fiber membranes was better than that of no plasma-treated ones.

LINE PROFILES DEPENDENT ON THE OPACITY PARAMETER IN AZ CAS (AZ Cas의 불투명도 계수에 따른 선윤곽)

  • 김경미;최규홍
    • Journal of Astronomy and Space Sciences
    • /
    • v.10 no.2
    • /
    • pp.146-151
    • /
    • 1993
  • AZ Cas는 B형의 주계열 별과 확장 대기를 가진 만기형으로 이루어진 쌍성계이다. 근성점 근처에서 Roche lobe를 채운 초거성으로부터 일어나는 질량 흐름이 미치는 효과를 구하기 위해 궤도위상 0.05와 0.09에서 불투명도 계수에 따른 AZ Cas의 선윤곽을 계산하였다. 원천 함수는 Hempe(1982)의 방법을 따라 Sobolev 근사방법을 이용하였으며 불투명도 계수가 클수록 넓은 흡수 부분을 가진 강한 선윤곽을 보였다. 궤도 위상 0.05의 부분식이세 나타난 bump는 흡수선위에 포피의 산란에 의해 생긴 방출선이 중첩되어 나타난 재방출 효과인 것으로 설명된다.

  • PDF

The Study of Gas Permeability through the Polyimide Membranes according to Imidization (이미드화도에 따른 폴리이미드 막의 기체루과에 관한 연구)

  • 김남일;조한석;홍치선;남세종
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1991.10a
    • /
    • pp.37-38
    • /
    • 1991
  • 몇가지 dianhydride와 diamine을 사용하여 합성한 PAA막을 가열온도와 가열시간을 달리하여 이미드화를 달리하는 막을 제조하고 이압법에 의하여 투과계수와 확산계수를 측정하였다. 이로부터 얻은 흡수계수는 Dual-Mode Sorption Model에 의하여 상관시켰다. 이로부터 polyimide막에 있어서 이미드화에 따른 기체루과 특성과 화학구조에 의한 기체투과 특성의 일부를 규명하였다.

  • PDF

Sr-90 Uptake by the Barley (Hordeum vulgare L. emend. Lamark) and Soil-to-Plant Transfer Coefficient (보리의 토양 Sr-90 흡수 및 토양 - 작물체 전이계수)

  • Choi, Yong-Ho;Chung, Kyu-Hoi;Chun, Ki-Jung;Kim, Sam-Rang;Lee, Jeong-Ho
    • Journal of Radiation Protection and Research
    • /
    • v.16 no.1
    • /
    • pp.33-42
    • /
    • 1991
  • A pot experiment on the Sr-90 uptake by the barley from a loamy-sandy soil of pH 6.05 treated with Sr-90 and slaked lime was carried out in a green house. The rate of Sr-90 uptake at maturity was, on an average, 0.41% for a naked barley Neolssalbori and 0.23% for a covered one Olbori. Transfer coefficients of Sr-90 for the former were higher than those for the latter by about 30-60% depending on the plant parts. There were, on the whole, not significant differences in the rate and in the coefficient among Sr-90 concentration treatments. Slaked lime addition equivalent to about 94kg/10a was not effective for lessening Sr-90 uptake or diminishing Sr-90 transfer coefficient. As transfer coefficients, 1.51, 4.45, 0.35, and 1.30, on the dry weight basis, could be proposed for the stem, leaf, seed, and whole top of the barley, respectively. Growth inhibition or yield decrease due to Sr-90 uptake was not observed.

  • PDF

An Experimental Study on Tube-Side Heat Transfer Coefficients and Friction Factors of the Enhanced Tubes Used in Regenerators of Absorption Chillers (흡수식 냉동기의 재생기에 사용되는 전열촉진관의 관 내측 열전달계수 및 마찰계수에 대한 실험적 연구)

  • Kim, Nea-Hyun
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.17 no.3
    • /
    • pp.716-723
    • /
    • 2016
  • Enhanced tubes are used widely in the heat exchangers of absorption chillers. In regenerators, corrugated, ribbed or floral tubes are commonly used. In this study, the tube-side heat transfer coefficients and friction factors of enhanced tubes were obtained experimentally using the Wilson Plot method. The results showed that the heat transfer coefficients and the friction factors were the largest for the corrugated tube, followed by the ribbed tube. The heat transfer coefficients and friction factors of the floral tube matched those of the smooth tube within 4%, which suggests that the heat transfer and friction characteristics of the floral tube may be accounted for properly by the hydraulic diameter. The B(e+) and g(e+) were obtained from the experimental data of the corrugated and ribbed tube. The B(e+) and g(e+) of the corrugated tube matched those of the existing correlation within 20%. The present results may be used for an assessment of the heat transfer and friction characteristics of the enhanced tubes for regenerators.