• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.416-421
• /
• 2001

The optimization of the reductant and acid concentration for stannane($SnH_4$) generation was investigated by using a continuous flow hydride generator combined with an inductively coupled plasma-atomic emission spectrometer. Several different prereductants were studied to remove the interfering effect of fluoride ion on the hydride generating of tin. The optimum acid concentration was 0.5-1.0 M for the 1-2% $NaBH_4$ and 1.0 M NaOH and the interfering effect of fluoride ion was minimized using boric acid and L-cysteine mixed solution as a prereductant. The reconveries of tin at 20 ng/mL level in the solution containing fluoride ion were 100~108 %.

• Journal of Intelligence and Information Systems
• /
• v.15 no.4
• /
• pp.159-182
• /
• 2009

We construct product networks from the retail transaction dataset of an off-line department store. In the product networks, nodes are products, and an edge connecting two products represents the existence of co-purchases by a customer. We measure the quantities frequently used for characterizing network structures, such as the degree centrality, the closeness centrality, the betweenness centrality and the centralization. Using the quantities, gender, age, seasonal, and regional differences of the product networks were analyzed and network characteristics of each product category containing each product node were derived. Lastly, we analyze the correlations among the three centrality quantities and draw a marketing strategy for the cross-selling.

• Polymer(Korea)
• /
• v.27 no.2
• /
• pp.120-128
• /
• 2003

The effects of catalyst, accelerator and blend composition on the cure behavior of unsaturated polyester resin (UPE), vinyl ester resin (VE) and their blends were studied using differential scanning calorimetry(DSC). The DSC thermograms strongly depend on each variable. The result shows that the small exothermic peak at 115$^{\circ}C$ is due mainly to the UPE component in the UPE/VE blends and the large one at 134~138 $^{\circ}C$ is due mainly to the VE component. The results also indicate that the change of the DSC thermogram measured after each blend was exposed to high temperature 18$0^{\circ}C$ and the fast curing conditions of a few tens seconds provide useful information on understanding the thermal processing of a blend at high speed. The measurements of resin flow time represent that there are three distinct stages of cure in the UPE/VE blends: induction, transition and macro-gelation stages, as similarly reported for UPE by others earlier. The thermal stability and flexural properties of the cured UPE are significantly improved by blending it with the VE, depending on the composition.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.65-73
• /
• 2013

Ground-coupled heat pump system has attracted attention as a promising renewable energy technology due to its improving energy efficiency and eco-friendly mechanism for space cooling and heating. Pipes buried in the ground play a role of direct thermal interaction between circulating fluid inside the pipe and surrounding soils in the geothermal exchange system. However, both complexities of turbulent flow coupling thermal-hydraulic phenomena and very long aspect ratio of the pipe make it difficult to model the heat exchange system directly. Energy balance for fluid flow inside the pipe was derived to model thermal-hydraulic phenomena, and one-dimensional pipe element was proposed through Galerkin formation and time integration of the equation. Developed element is combined to pre-developed FEM code for THM phenomena in porous media. Numerical results of Thermal Response Test showed that line-source model overestimates equivalent thermal conductivity of surrounding soils due to thermal interaction between adjacent pipes and finite length of the pipe. Thus, inverse analysis for the TRT simulation was conducted to present optimal transformation matrix with utmost convergence.

• Journal of the Korean Ceramic Society
• /
• v.41 no.4
• /
• pp.297-301
• /
• 2004

Nano-sized mullite (3Al$_2$O$_3$$.$2SiO$_2$) colloids were prepared by use of the spray combustion method. For combustion reaction, Al(NO$_3$)$_3$$.$9$H_2O$, and CH$_{6}$N$_4$O were used as an oxidizer and a fuel respectively, and then colloidal silica was also added as 2SiO$_2$source for mullite. The temperature of the reaction chamber was kept at 80$0^{\circ}C$ to initiate the ignition of droplets of the mixed precursors. For preventing droplet coagulation, the droplet number concentration was reduced using the metal screen filter, and the residence time of aerosol was kept at 2.5 seconds for laminar flow. The synthesized colloidal particles had an uniform spherical shape with 130 nanometer size and the crystalline phase showed the mullite with stoichiometry in the observations of XRD and TEM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1161-1168
• /
• 2002

In this paper, the throughput performance of an ARQ scheme is analyzed with noisy feedback channel, in order to exactly analysis for performance of an ARQ scheme. An ARQ mechanism is presented by state diagram, and the throughput of an ARQ scheme is mathematically derived using generation function for a signal flow graph. The channel is modeled by the Nakagami-m fading channel which is distributed over far and wide, and the throughput performance of an ARQ scheme, which is applied in BPSK and BFSK systems, according to feedback gain and fading index m is analyzed through computer simulation. In the results, It is shown conformed that the throughput of an ARQ scheme decreased according to the increase of the noise for feedback channel, but it increased according to the increase of the feedback gain and fading index m. Also, it is shown that the throughput of an ARQ scheme using BPSK system is superior to BFSK system because of the difference of bit error probability between BPSK and BFSK systems.

• Journal of the Korea Concrete Institute
• /
• v.18 no.3 s.93
• /
• pp.379-388
• /
• 2006

This paper presents a model for evaluating the contribution by arch action to shear resistance in shear-critical reinforced concrete beams. Based on the relationship between shear and bending moment in beams subjected to combined shear and bending, the behavior of a beam is explicitly divided into two base components of the flexural action and the tied arch action. The compatibility condition of the shear deformation that deviates from Bernoulli bending plane is formulated utilizing the smeared truss idealization with an inclined compression chord. The Modified Compression Filed Theory is employed to calculate the shear deformation of the web, and the relative axial displacements of the compression and the tension chord by the shear flow are also calculated. From this shear compatibility condition in a beam, the shear contribution by the arch action is numerically decoupled. Then the validity of the model is examined by applying the model to some selected test beams in literatures. The results may confirm the rationale of the proposed behavioral model.

• The Journal of Society for e-Business Studies
• /
• v.23 no.2
• /
• pp.67-81
• /
• 2018

Technology commercialization is a reward process for companies' various trials and investment to develop technologies, which can be regarded as a way to figure out company's business performance. To successfully attain companies' purpose via technology commercialization, a variety of knowledge which triggers and completes business activities are needed. This paper suggests a methodology to analyze problems and solutions around the technology commercialization process in terms of knowledge distribution status, especially focused on Korean SMC cases. The knowledge map of this paper is constructed from the knowledge networks and identifies problems and solutions of the target process. A case study for applying proposed concepts to SMC's cases is also performed by checking knowledge distribution status and extracting practical implications. This paper's ideas can be regarded as one of references for SMCs to prepare technology commercialization with guaranteeing facilitated knowledge distribution and utilization.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.3
• /
• pp.235-247
• /
• 2009

Recognizing the potential and importance of biotechnology in boosting South Korea in an environment of competitive neoliberal globalization, South Korea has actively promoted the development and commercialization of biotechnology and legislated related laws. This should not, however, be read as yet another instance of the neo-liberal 'marketization' of economic activities and the demise of nation-states. The development of biotechnology in South Korea - and its commercialization - is closely intertwined with the practice of the Korean developmental state, and this practice has led to the production of new state spaces: biotechnology clusters. This paper examines what the roles of the state in developing and nurturing biotechnology clusters are.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.3
• /
• pp.75-83
• /
• 2011

Emerging issues related with fully coupled Thermo-Hydro-Mechanical (THM) behavior of unsaturated soil demand the development of a numerical tool in diverse geo-mechanical and geo-environmental areas. This paper presents general governing equations for coupled THM processes in unsaturated porous media. Coupled partial differential equations are derived from three mass balances equations (solid, water, and air), energy balance equation, and force equilibrium equation. With Galerkin formulation and time integration of these governing equations, finite element code is developed to find nonlinear solution of four main variables (displacement-u, gas pressure-$P_g$), liquid pressure-$P_1$), and temperature-T) using Newton's iterative scheme. Three cases of numerical simulations are conducted and discussed: one-dimensional drainage experiments (u-$P_g-P_1$), thermal consolidation (u-$P_1$-T), and effect of pile on surrounding soil due to surface temperature variation (u-$P_1$-T).