• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.334-338
• /
• 2011

일반적으로 유역에서 발생하는 토양손실은 붕괴사면과 표면침식, 토사류 붕괴에 의한 운반, 하상의 침식등 자연적인 요인과 도로건설, 산림의 벌채, 단지개발 등 인위적인 원인으로 발생할 수 있다. 토양손실의 발생은 농업생산성을 떨어뜨리고 목초지를 손상시키며, 물의 흐름을 방해하여 홍수위 상승, 저수지의 저수용량 감소, 고탁수 등 다양한 문제를 야기 시킨다. 이러한 문제를 해결하기 위해선 우선 토양손실 발생의 위험지역을 선정하고 그 지역을 집중적으로 관리하는 적절한 관리 대책의 마련이 필요하다. 이에 본 연구에서는 낙동강유역 전체를 대상유역으로 선정하고 토양손실 발생에 영향을 주는 여러 요소중 도시화나 농경지 확장 등 인간의 인위적인 개발로 인해 쉽게 변경될 수 있는 토지이용도를 이용하여 세부적으로 분석하였다. 토지이용도를 구성하고 있는 총 8가지의 토지이용항목 중 다른 항목들에 비해 분포면적이 매우 작은 녹지, 습지, 나지를 제외한 5가지의 항목(시가화, 논, 밭, 산림, 수역)의 분포면적을 통해 토지 이용특성에 따른 유사발생의 연관성을 파악하였으며 유역별 유사발생 위험순위를 평가하였다. 유사발생 위험순위 평가결과, 전체 낙동강유역내 유사발생 위험성이 높은 표준유역들로 구성되어있는 중권역은 내성천, 위천합류점, 합천댐유역, 안동댐유역으로 모두 높은 순위를 차지했다. 내성천유역, 위천합류점 유역, 합천댐유역은 구성하고 있는 표준유역의 절반 이상이 높은 순위들로 구성되어 있으며 안동댐유역은 구성하고 있는 소수의 표준유역이 유역내 최상위 순위를 차지하였다.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.101-108
• /
• 2003

Construction of automated terminal it urgently demanded to gain the foundation of hub-port in north east Asia. Therefore we suggest an adequate operating system layout of automated terminal in Korea. In this paper the aim of automated terminal operating system is satisfied. four basic models are divided according to moving course of export and import cargo of each automated equipments, several input data are changed and analyzed dynamically by Trial and Error method, and then an optimized operating system model is selected, and designed for yard operating system layout on the basis of the selected model. Particularly, the productivity of automated port is up to the kind of automated equipments. However, because expense and present work process must be considered actually. In order to prevent confusion of the work, the method to optimize the present work and substitute prevent equipments and automated equipments was designed. It is a premise that ail the yard equipments described in this paper must be automatic except quay crane.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.110-110
• /
• 2017

마이크로 플루이딕 디바이스는 화학, 생물학 실험 및 생체 의학 진단을 위한 플랫폼으로 지난 20년간 그 사용 및 연구가 증가되어 왔다. 마이크로 플루이딕 디바이스를 제작하는 데 있어 가장 일반적으로 사용되는 재료는 실리콘이지만 비용이 많이 들고 불투명하므로 광학 검출이 필요한 곳에 적용이 제한된다. 이러한 측면에서 열가소성 플라스틱은 상업화의 중요한 요소인 대량 생산에 있어 큰 잠재력을 가지고 있으며 저렴하고, 가공이 쉽고, 유연하고, 광학적으로 투명하고, 화학적으로 불활성이며, 생체적합성을 가진다. 본 연구에서는 열가소성 플라스틱의 일종인 PMMA Poly(methylmethacrylate)를 효율적으로 접합하기 위해 비교적 낮은 온도와 낮은 압력에서 에탄올을 활용한 접착방식을 개발하였다. 먼저, PMMA 기판의 전체 표면을 $80^{\circ}C$에서 20 분 동안 에탄올로 처리한 후, $60^{\circ}C$에서 20 분간 열 압착하는 방식으로 영구적인 결합이 이루어졌다. 결합 강도 및 채널의 sealing 정도를 확인하기 위해, 인장 강도, 누수 및 파열 테스트를 수행하였다. 결합강도는 약 12.4 MPa로 타 연구와 비교할 때 매우 높았으며 마이크로 채널의 전체 내부 체적보다 거의 450 배 높은 강한 액체 흐름을 견딜 정도로 견고한 결합이 유지되었다. 열가소성 플라스틱의 본딩에 사용되는 유기 용매는 광학 특성을 희생시키지 않으면서 결합 속도를 높일 수 있지만, 결합 공정 중에 용매로 인해 마이크로 채널이 막히는 현상이 발생될 수 있다. 따라서, 견고한 본딩을 유지하면서 채널 막힘을 방지하기 위해 마이크로 채널을 소수성으로 선택적으로 처리하여 내벽의 표면 특성을 튜닝해 주는 기법을 추가로 적용하였다. 본 연구에서 사용한 방법은 아민-PDMS (polydimethylsiloxane) 링커를 적용하여 기판 표면의 극성을 변경시켜 주었다. 아민-PDMS 링커는 PC (polycarbonate), PET (polyethylene terephthalate), PVC (polyvinyl chloride) 및 PI (polyimide)와 같은 다양한 열가소성 플라스틱의 표면 소수성을 현저히 증가시키며 화학적, 열적 안정성이 뛰어나다. 아민-PDMS 링커는 PMMA의 카보닐 그룹과 반응할 수 있는 아민 사이드 그룹을 포함하는 PDMS 백본으로 구성되며 처리된 대상표면을 소수성으로 만든다. 아민-PDMS 링커 처리 이후 채널은 소수성으로 변화되었으며 이는 접촉각(contact angle)의 증가로 확인되었다. 코팅된 채널을 에탄올로 30분간 80도에서 처리하여도 소수성은 그대로 유지되어 마이크로 채널의 선택적인 소수성 코팅이 성공적으로 수행되었다.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.77-86
• /
• 2010

The study developed physical distribution channel choice models reflecting decision making of the firms and studied how choice decision factors influence selection of distribution channel. The distribution channel survey data in Korea was used to do empirical study. As a choice set, distribution channels were classified into two main choice channels: direct and indirect channels. In addition, indirect channels were classified into other three channels according to the type of intermediate point: distribution center, wholesale store, and agency. This study developed choice models by applying both binary and multinomial logit model with various set of factors. The results showed that the developed logit models seemingly reflect distribution channel choice behaviors. The hypothesis tests on how each factor influences choice of distribution channel were performed and discussed as well.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.113-116
• /
• 2008

As the integration in semiconductor display develops, semiconductor process becomes multilayer. In order to form several layer patterns, etching process which uses photoresistor (PR) must be performed in multilayer process. Repeated etching processes which take long time and PR residue cause mortal problems in semiconductor. To overcome such problems, we studied about the solution which eliminates PR effectively by using normal dry and wet etching method using plasma activated PR strip solvent in liquid condition. At first, we simulate the device which activates the plasma and make sure whether gas flow in device is uniform or not. Under activated plasma, etching effect is elevated. This improvement reduces etching time as well as display production time of semiconductor process. Generally, increasing etching process increases environmental hazards. Reducing etching process can save the etchant and protect environment as well.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.807-813
• /
• 1986

The orthogonal cutting method of the nodular graphite cast iron in the lathe turning, whose matrix were formulated under two kinds of annealing conditions, has been experimentally studied and the results investigated. The various characteristics of machinabilities of the nodular cast iron, depending upon its matrix, have been obtained from the results as follows. (1) As depth of cut increases, the cutting ratio and the shear angles tend to slightly increase, and as the containing quantity of ferrite matrix increases, they slightly decrease. (2) As depth of cut increases, the cutting force increases in an approximate straight line, and as the containing quantity of ferrite matrix increases, they decreases and the decreasing rate is about 20-30%. (3) As the containing quantity of ferrite matrix increases, the friction force acting on the tool face decreases and the decreasing rate is about 34-40% in case of the lower depth of cut, but in case of the higher depth of cut the decreasing rate is very small. (4) Both shearing force and vertical force show a lineal increases, and according as ferrite matrix increases there is a decrease by 25% in shearing force and a 12-25% decrease in vertical force. (5) Shearing speed and chip flow speed keep almost a constant value irrespective of matrix.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.4
• /
• pp.311-322
• /
• 2014

Concrete filled tubular structure should be installed diaphragms for moment connection. However internal and through diaphragm should be special welded when connected to column tube. The other hand, that has become increase of stress concentration and extend of construction error. Therefore, In this study the seismic performance of beam to column connections with External Diaphragms and implement cycle loading experiment. we had evaluated seismic performance with mentioned experiment which is concrete filled or not, variable shapes, to be welded or not of diaphragm. Also, formula of strength of external diaphragm was analyzed and looked into adequacy with regard to formula of tension strength.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.27-37
• /
• 2001

Soil erosion by outflow of water or rainfall has caused many environmental problems as declining agricultural productivity, damaging pasture and preventing flow of water. As the interest in environment is increasing lately, soil erosion is considered as a serious problem, whereas the systematic regulation and analysis for that have not established yet. This research shows the method of extracting factor entered model which expects soil erosion by GSIS. There are several erosion model such as ANSWER, WEPP, RUSLE. The research used RUSLE erosion model which could expect general soil erosion connected easily with GSIS data. RUSLE's input factors are composed of rainfall runoff factor(R). soil erodibility factor(K), slope length factor(L), slope steepness factor(S), cover management factor(C) and support practice factor(P). The general equation used to extract L, S factor on the RUSLE to be oriented for agricultural area has some limitation to apply whole watershed. So, on this study we used a revised empirical equation applicable to the watershed by grid on the GSIS. Also, we analyzed RUSLE factors by watershed being analyzed with watershed extraction algorithm. Then we could calculate the minimum, maximum. mean and standard deviation of RUSLE factors by watershed.

• Archives of design research
• /
• v.11 no.1
• /
• pp.119-130
• /
• 1998

The social-democratic ideas which define the modern national Swedish idea have had an important influence on Swedish modern design during this century. Swedish designers found humanistic and democratic values in the traditional design style and they tried to create a modem style that was based on handcraft traditions as well as modern industrial aesthetics. Issues raised by Swedish designers of that time induded how Sweden was achieving a national identity through design and how design retlected changes within society. The purpose of this study is to investigate the social reformation policy of the Swedish government during the 1930-1970 period and its influence on Swedish modern design. This paper, it is hoped, will provide an opportunity to place contemporary Swedish design in a social and aesthetic context.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.409-413
• /
• 2014

This study was carried out to design the optimum mixing ratio of aggregate, cyclic aggregate, and binder (moisture, emulsified asphalt, and emulsion type additives) and produce recycling cold asphalt paving mixture satisfying site work standard. The cyclic aggregate satisfying KS F 2572 was collected from waste asphalt by adequate processing. As the moisture content increased, the shearing strength was decreased. The maximum marshall stability was shown at the 3.0 wt% moisture content. So the optimum moisture content was 3.0 wt%. The marshall stability and flow value with the amount of emulsified asphalt was satisfied in the range of 0.5~2.5 wt%, and the porosity was satisfied in the range of 0.7~2.5 wt%. So the optimum amount of emulsified asphalt was 1.6 wt%. The optimum amount of emulsion type additive was 0.1 wt% in the light of marshall stability and degree of saturation of recycling cold asphalt mixture.