• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1355-1360
• /
• 2013

A cracked solid propellant would have failure or fracture of rocket because of excessive combustion according to increase of burning area, therefore it is important to evaluate the fracture toughness of solid propellant. A procedure is used to investigate the material under a range of test temperatures between -60 and $60^{\circ}C$, three kind of specimen thickness, 4, 12.5 and 24.5 mm to determine the effect of two parameters on the fracture toughness. A center cracked tension (CCT) specimen is used in these tests, which were conducted using INSTRON 5567 testing machine and environmental chamber to evaluate the fracture toughness. The experimental results show that the fracture toughness tends to decreases with an increase in the temperature, and the effect of thickness indicates that the fracture toughness is highest at 12.5 mm under various temperatures except $-60^{\circ}C$. It is found that the fracture toughness of solid propellant is changed due to glass transition behavior around $-60^{\circ}C$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.8-8
• /
• 2019

전 세계적으로 ASR, ASTR과 같은 인공함양에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 수자원을 확보하고 생산수의 수질 개선을 꾀할 수 있는 지하 저수지 기술을 개발하고 낙동강 하구의 염 대수층에 설치한 시험시설에서 검증하였다. 국내외 대 하천의 하구에는 상부에는 점토층이 발달해 있고 하부에는 대수층이 대규모로 발달해 있으나 염 지하수로 포화되어 있는 경우가 많다. 점토층은 오염된 지표수나 지표면에서 발생한 오염사고로부터 하부의 피압 대수층을 분리하는 역할을 할 수 있다. 따라서 피압 대수층은 기존의 지표수 수자원 또는 대체 수자원의 한계를 극복할 수 있는 좋은 수자원 확보 공간이 될 수 있다. 지하 저수지 실증 연구를 위하여 낙동강 하구의 피압 대수층에 주입정, 양수정과 관측정 등을 포함한 시험 시설을 설치하였다. 낙동강에서 취수한 지표수의 부유물을 제거하고 대수층에 주입하여 기존의 염 지하수를 밀어내고 렌즈 형태의 담수체 (지하 저수지)를 조성하였다. 양수정과 관측정을 통하여 조사된 지하 저수지는 원 지하수가 배제되었고, 하천수보다 수질이 개선되었음을 보였다. 본 고에서는 실증 연구에서 도출된 수자원 확보 및 수질 개선 성과를 제시하고자 한다. 지하 저수지는 공사 규모가 작고, 수몰지가 발생하지 않으며, 수요지 인근에 위치해 있어 지역 내 수자원 자급이 가능하고, 토지 이용도 자유롭다. 또한 평상 시에 연중 균일한 양질의 수자원 공급이 가능하고 가뭄, 지표수 오염 등 비상 시에도 장기간 안정적으로 청정 수자원 공급이 가능하다. 지하 저수지는 물 안보도 제고를 위한 취수원 다변화 차원에서 기여할 수 있을 것으로 판단된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1436-1445
• /
• 1990

Performance of vehicles depends mainly on engine performance, transmission gear ration and shifting pattern. In this paper, determination method of gear ratios and shifting pattern for automatic transmission equipped vehicles has been proposed. Computer programs for gear ratio determination and shifting pattern decision using optimal design technique have been developed for the purpose of increasing vehicle acceleration performance. For preceding study, computer simulation of vehicle performance is carried out using numerical technique.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1499-1500
• /
• 2008

최근에 LCD의 후면광원으로 LED를 채용하는 경우가 증가하고 있다. 이러한 LED를 Back Light으로 사용할 경우 일정한 휘도의 유지와 색좌표의 보정은 고급제품의 경우 채용이 증가하고 있다. 본 연구에서는 LCD Monitor용 LED BLU의 CMS(Color Management System)을 개발하기 위하여 1.5W R,G,G,,B가 하나의 PKG에 들어있는 LED를 이용하여 Direct type의 Back Light Unit을 개발하였다. 방열 및 휘도 균일도를 고려하여 LED part를 설계, 개발하였고 LED를 PWM으로 구동하기 위하여 Switching circuit이 포함되는 구동회로 부분을 설계, 개발 하였다. 또한 Color Sensor와 CMS IC를 사용하여 Color를 Control하고 휘도도 컨트롤하는 제어회로 부분도 개발을 하였다. CMS 기능의 제어회로 부분을 개발하기 위하여 MicroController를 사용하였으며 CMS IC와의 통신을 위한 부분도 개발하였다. 이러한 구성을 개발하여 시제품을 직접 제작하였다. 평가를 위하여 성능시험을 실시하였고 광학적인 평가도 시행하였다. 제작된 시제품은 L558 x W359 x H30 으로 하였다. 휘도는 목표휘도를 이루었으며 균일도는 85% 이상이 되었다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.61-66
• /
• 2014

Graphite is commonly used for rocket nozzle. The purpose of the present study is to evaluate compression fracture behavior of ATJ graphite. Uniaxial compression test is conducted in accordance with ASTM C 695 in the range of R.T to $900^{\circ}C$. The size effects of specimen on the compressive strength and fracture behavior were investigated. Two types of cylindrical specimen, i.e., where the diameter to length ratio is 1:2 (ASTM C 695 specimen) or 1:1, were tested at room temperature.

• Economic and Environmental Geology
• /
• v.18 no.4
• /
• pp.343-355
• /
• 1985

Spectral reflectivity and microhardness were measured quantitatively on polished surfaces of a selection of bireflecting minerals obtained from several well known metallic deposits. Incremental errors are much higher than decremental errors and errors were found to be lowest in the spectral region close to the green wavelength ($544m{\mu}$). The characteristics of the spectral profile are significant in their control of white light color. The covellite and graphite have reflectivity profiles similar in shape for each principal direction, showing noticeable difference in magnitude between the profiles: The spectral reflectivity of covellite parallel to the extraordinary vibration is higher (R$$\simeq_-$$10%) than that parallel to the ordinary vibration and graphite shows opposite feature. Reflectivity of the enargite and famatinite cut parallel to the cleavage plane is always higher (R$$\simeq_-$$5%) than that of the section cut normal. The optical symmetry of 5 bireflecting minerals was determined by noting the variation in reflectivity at $544m{\mu}$. The data indicate that covellite is optically uniaxial positive and graphite is optically uniaxial negative. The Rm values for enargite and famatinite are clearly closer to the minimum value for the mineral ($R_1$) than to the maximum value ($R_2$) : the minerals can be recognized as optically biaxial positive. Enargite and famatinite cut parallel to cleavage have much higher hardness values (HV=> $200kg/mm^2$) than those cut normal to cleavage. Vickers indentations exhibit characteristic features for all the bireflecting mineral species studied. Broad radicle groupings of the mineral species can be made with regard to the reflectivity microhardness numbers.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.4 s.304
• /
• pp.31-38
• /
• 2005

In this paper, we propose the chromatic adaptation models (CAM) for the variations of the luminance levels. A chromatic adaptation model, CAM$\Delta$Y , is proposed according to the change of luminance level under the same illuminants. The proposed model is obtained by the transform the test colors of the high luminance into the corresponding colors of the low luminance. In the proposed model, the optimal coefficients are obtained from the corresponding colors data of the Breneman's experiments. In the experimental results, we confined that the chromaticity errors, $\Delta$u'v', between the predicted colors by the proposed model and the corresponding colors of the Breneman's experiments are 0.004 in u'v' chromaticity coordinates. The prediction performance of the proposed model is excellent because this error is the threshold value that two adjacent color patches can be distinguished. Additionally, we also propose equal-whiteness CCT curves (EWCs) by CAM$\Delta$Y according to the luminance levels of the surround viewing conditions. And the proposed EWCs can be used as the theoretical standard which determines the reference white of the color display devices.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3C
• /
• pp.95-104
• /
• 2012

Due to current interest in creation of urban space and urban landscape, more emphasis has been placed on underground space development. With increasing number of underground power cables and its importance, a study of backfill materials for pipe is now imperative. Backfill materials require outstanding thermal characteristics since breakdown of cable insulation can be caused if heat generated from transmission of underground power cables had not been effectively discharged through backfill materials. Also, coal ash, which are industrial by-products, is being produced in high volume every year. Among them, ponded ash (PA) is not recycled and instead, mostly buried. Therefore in this study, thermal conductivity test based on mixture ratio (PA, ponded ash : FA, fly ash) was performed to evaluate the thermal conductivity characteristics of CLSM (controlled low strength materials) with coal ash. The results indicate that the mixture ratio (PA, ponded ash : FA, fly ash) of 80:20, water contents of 28~30%, and cement contents of 7-11% showed the highest conductivity at 0.796~0.884W/mK and thus, considered optimal in terms of recycling ponded ash (PA) as well as for maximizing utilization as backfill materials for pipe in underground.

• Composites Research
• /
• v.33 no.4
• /
• pp.228-233
• /
• 2020

In this paper, a single lap shear test was performed using a glass fiber reinforced composite material (GFRC). Pencil lead drawn paper sensor (PLDPS) was applied for single lap shear test being performed. Bisphenol-A epoxy and amine hardener were used as adhesives combining with composite materials. To make a difference in adhesive properties, the adhesive was cured under different conditions. PLDPS was made of a 4B pencil on A4 paper. Because graphite in a pencil was an electrically conductive substance, electric resistance (ER) could be measured. A change in ER was observed by a position where a PLDPS was attached to single lap shear specimens. It was confirmed that the change in ER was different depending on two attached positions and was observed by lap shear strain as well. In case the lap shear strain was large, the change in ER of PLDPS was high. This was because the larger the extension of the adhesive part, the larger the degree of bending of the specimen and thus the larger the distance change between two electrodes.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.12
• /
• pp.27-33
• /
• 2012

The purpose of this study is to evaluate the field applicability of Quantum Stick in scale deposit prevention for subway tunnels in Seoul. This technology was installed into drainpipes and its performance was monitored through occasional site visits. SEM and EDS were also performed on scale collected from these drain pipes. Results showed a decrease in scale deposits due to Quantum Stick treatment. In the field test, the device was found to be effective in preventing scale formation in new pipes as well as reducing existing scale in previously installed pipes. However, further investigations are necessary to account for various environmental conditions. In conclusion, the results indicate that molecular Vibration technology is effective in suppressing scale formation.