• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.133-140
• /
• 2014

3D stereoscopic display is becoming increasingly common. Most stereoscopic displays still require the viewers to wear 3D glasses to watch 3D contents. As it is widely known, especially in shutter glass method, 3D glasses normally cause to reduce the perceived colorfulness and sharpness considerably as well as brightness. In this paper, we have estimated and analyzed the degradation of perceptual brightness in 3D images viewed through the shutter glasses by using CIECAM02 model. This study focuses on loss of colorfulness and sharpness when PDP-TV is watched at 3D mode in shutter-glass type 3D-TV. We analyze perceptual colorfulness and sharpness of 3D display with glasses and propose a method to compensate 3D colorfulness and sharpness for the best 3D experience.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.3
• /
• pp.205-210
• /
• 2022

A novel OLED pixel circuit is proposed in this paper that uses only n-type thin-film transistors(TFTs) to improve the luminance non-uniformity of the AMOLED display caused by the threshold voltage variation of an OLED driving TFT. The proposed OLED pixel circuit is composed of 6 n-channel TFTs and 2 capacitors. The operation of the proposed OLED pixel circuit consists of the capacitor initializing period, threshold voltage sensing period of an OLED·driving TFT, image data voltage writing period, and OLED·emitting period. As a result of SmartSpice simulation, when the threshold voltage of·OLED·driving TFT varies from 1.2 V to 1.8 V, the proposed OLED pixel circuit has a maximum current error of 5.18 % at IOLED = 1 nA. And, when the OLED cathode voltage rises by 0.1 V, the proposed OLED pixel circuit has very little change in the OLED current compared to the conventional OLED pixel circuit. Therefore, the proposed pixel circuit exhibits superior compensation characteristics for the threshold voltage variation of an OLED driving TFT and the rise of the OLED cathode voltage compared to the conventional OLED pixel circuit.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.53-60
• /
• 2005

This work Proposes and describes an LCD backlight driver IC using a voltage feedback circuit which improves the brightness uniformity. The proposed circuit controls the brightness of a backlight by amplifying of sampling voltage at a lamp. To keep the uniformity of brightness, the circuit has a reference lamp. The output voltage of the reference lamp is supplied commonly to each lamp that reduces a resistance deviation of the lamps. As a result, the proposed circuit shows brightness uniformity improvement of about $40\%$ compared to the conventional ones.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.8
• /
• pp.55-64
• /
• 1999

In this paper, new gamut-mapping algorithm (GMA) that utilizes variable anchor points (center of gravity on the luminance axis) is proposed. The proposed algorithm increases luminance range, which is reduced from conventional gamut mapping toward an anchor point. In this process, this algorithm utilizes multiple anchor points with constant slopes to both reduce a sudden color change on the gamut boundary of the printer and to maintain a uniform color change during the mapping process. Accordingly, the proposed algorithm can reproduce high quality images with low-cost color devices.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.8
• /
• pp.669-679
• /
• 2013

When an image is converted from HDR (high dynamic range) to LDR (low dynamic range), a tone mapping process is the essential component. Many TMOs (tone mapping operators) have been motivated by human vision which has lower physical luminance range than that in real scene. The representative of human vision properties which motivate TMOs is the local adaptation. However, TMOs are ultimately compressing image information such as contrast, saturation, etc. and the compression causes defects in image quality. In this paper, in order to compensate the degradation of the image which is caused by TMOs, the visual acuity-based edge stop function is proposed for applying the property of human vision to base-detail separation. In addition, using CSF (contrast sensitivity function) which represents the relationship among spatial frequency, contrast sensitivity, and luminance, the sharpness filter is designed and adaptively applied to the detail layer in regard to surround luminance.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.1
• /
• pp.38-50
• /
• 1999

Currently many devices reproduce electronic images in the various ways. However the color that is reproduced in any device is different from the original color due to the difference in the gamut between devices. In this paper, an image dependent gamut mapping method is proposed. This method clips the chroma with compensating for the change of lightness caused by the lightness scaling. The anchor point, which is the center point in the mapping, is set as a lower point by the proposed method than a point by the conventional mapping method. This reduces the color difference between point. In addition, to heighten the color contrast on the constant hue, the different two mapping methods are applied to the printer gamut which is divided in two region, bright region and dark region. Consequently, the printer output image was highly consistent with the corresponding monitor image.

• Journal of Broadcast Engineering
• /
• v.14 no.6
• /
• pp.749-768
• /
• 2009

In this paper, an intra prediction offset compensation method is proposed to improve intra prediction in H.264/AVC. In H.264/AVC, intra prediction based on various directions improves the coding efficiency by removing spatial correlation between neighboring blocks. In details, neighboring pixels in reconstructed block can be used as intra reference block for the current block to be coded when intra prediction method is used. In order to reduce further the prediction error of the intra reference block, the proposed method introduces an intra prediction offset which is determined in the sense of the rate-distortion optimization and is added to the conventional intra prediction block. Besides the intra prediction offset compensation, the coefficient thresholding method which is used for inter coding in JM 11.0, is used for chroma component in intra block, which leads the improvement of the luma coding efficiency of the proposed method. In experiments, we show that the proposed method achieves average 2.45% in High Profile condition and maximum 4.41% of bitrate reduction relative to JM 11.0.

• Journal of Advanced Navigation Technology
• /
• v.26 no.2
• /
• pp.72-77
• /
• 2022

Among the techniques of reinforcement learning, Q-Learning means learning optimal policies by learning Q functions that perform actionsin a given state and predict future efficient expectations. Q-Learning is widely used as a basic algorithm for reinforcement learning. In this paper, we studied the effectiveness of selecting and learning efficient paths by designing policies and rewards based on Q-Learning. In addition, the results of the existing algorithm and punishment compensation policy and the proposed punishment reinforcement policy were compared by applying the same number of times of learning to the 8x8 grid environment of the Frozen Lake game. Through this comparison, it was analyzed that the Q-Learning punishment reinforcement policy proposed in this paper can significantly increase the learning speed compared to the application of conventional algorithms.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.206-206
• /
• 2009

RF Magnetron Sputtering 방법을 통해 ZnS:Mn 박막 형광체를 증착한 다층 TFEL (Thin-Film Electroluminescent) Backlight 소자를 제작하였다. Alumina 기판 위에 Au 전극과 PMN 후막 유전체를 Screen printing 기법으로 층을 형성하였다. 그 위에 MgO 박막 유전체를 E-Beam 장비를 이용하여 증착 후, ZnS:Mn 박막 형광체를 50 W 의 저전력으로 약 8000 ${\AA}$ 두께로 증착하였다. 형광체는 Sputter 증착 시 Sulfur 부족 현상을 보상해주기 위해 ZnS:Mn (0.5%) Target 에 2 at % 의 Sulfur를 첨가하였으며, 상부 전극으로 사용할 ITO 는 DC Magnetron Sputter 를 이용하여 증착하였다. 어닐링 공정은 Air 분위기에서 급속 열처리 장치 (RTA, Rapid Thermal Annealing) 을 이용하여 600 $^{\circ}C$에서 20 분 진행하였다. 이러한 과정들을 통해 저전압 고휘도의 TFEL Backlight 소자를 제조할 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.6
• /
• pp.1431-1440
• /
• 1993

This paper presents a new NC machine performance test and calibration system. In order to measure NC machine erros in simpler, and less time-comsuming way, some indirect measuring systems such as circular disk system and double ball bar system have been developed instead of laser interferometer. But these indirect measuring systems have shown their limits in identifying each of NC machine error sources in absolute numerical value. Therefore, we developed an unique NC machine error measurement system which provides a simple measuring process like other conventional indirect methods and still can indentify each of NC machine error sources in absolute numerical value.