• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.5
• /
• pp.231-241
• /
• 2013

In this paper, we propose an average approximation filter which can effectively remove the noises of the images. The noises include impulse noises, gaussian noises and mixed noises. The algorithm is as follows. First, as a step of noise detection, we find whether the difference between the pixel value and the average value is greater than the threshold value or not after getting the average value that removed the minimum and maximum values in the applied mask. If the pixel value is greater than the threshold value, the pixel value is processed as noise. If it is less than or equal to the threshold value, it is processed as non-noise. Next, as the noise reduction step, we output the approximate value in mask as the pixel value and the average value except the minimum and maximum values of the pixel including the noise. As the result of applying this average approximation filter to the mixed noise images, the approximation filter can reduce the noises effectively more than 0.4[dB] as compared with applying the median filter and the average filter, respectively.

• Journal of Broadcast Engineering
• /
• v.4 no.2
• /
• pp.134-143
• /
• 1999

In this paper, in order to implement the IDWT(inverse discrete wavelet transform) with relatively low complexity, we propose a VLSI architecture for odd-tap linear-phase IDWT filters. By considering the symmetric property of the linear phase filter, the input is added to the one located at symmetrical position of the filter before filtering. Then. we rearrange the delay line of the filter in a U-shaped fashion. requiring no global interconnection between the components. The proposed architecture for the IDWT filter consists of delay units. operator units, adder units. and postprocessor unit. Since each units are configured regularly and interconnected locally. the proposed architecture can accommodate arbitrary linear phase IDWTs by simply adding/removing the corresponding units. The M -level IDWT can be implemented by interconnecting the proposed architecture in a cascaded or semi-recursive form. It is expected that the proposed architecture for the IDWT can be effectively employed in the related area including MPEG-4, since the proposed architecture is less complex than the conventional architectures.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.109-116
• /
• 2003

The amount of radioactive waste is expected to be increased continuously because of the rapid growth of the domestic nuclear industry, full power operation of the HANARO reactor and the increased research activities of the nuclear fuel cycle. Accordingly the efforts are focused to achieve the handling of radioactive waste in safe and reduce the volume of radioactive waste. The PIEF is carrying out the PIE (post irradiation examination) of spent fuel rods related to the identification of cause defect and evaluation of integration safety. This study describes the technologies and experiences of compaction, shredding and cutting of the solid radioactive waste used in the PIE. The quantity of the high level waste was reduced by 1/12 using the 100-ton compressor installed in hot-cell. Also middle and low level waste was reduced by 1/8 using the 60-ton compressor installed in intervention area. Plastic drums were shredded by crusher to be compacted in the ratio of 1/5, used filters in the ratio of 1/6 and the number of drum is also reduced by cutting procedure for the non-volatile materials such as metal.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2003.11a
• /
• pp.146-148
• /
• 2003

Bayer 공정은 가성소다를 이용하여 보오크사이트로부터 수산화알루미늄을 추출하는 공정이다. 그러나 보오크사이트 추출 후 1차 침전공정에서 반응한 보오크사이트 잔사는 침전시킴으로써 깨끗한 공정액을 분리하는 데 이때 침전되지 못한 다량의 분산성 고형물이 공정액 중에 존재하게 되는데 이를 분산성 보오크사이트(레드머드) 미립자라하며 보통 80-100mg/$\ell$의 농도를 나타낸다. 그러므로 이를 제거하기 위해 다음 공정인 입상여과필터 공정을 사용하는데 이때 필터링 효율증대를 위해 보조제로써 다량의 소석회(Ca(OH)$_2$)를 투여하여 공정액 중의 고형물을 농도를 8-100mg/$\ell$에서 5mg/$\ell$로 낮추는 공정을 사용하고 있다. 특히 국내 수산화알루미능 제조회사일 KC(주)의 경우 소석회 사용량이 일 10톤, 년간 약 3,600톤을 사용함으로써 소석회의 사용량에 따라 같은 량의 슬러지가 발생되게 된다. 따라서 여과후 발생되는 슬러지의 처리비용 문제(연간 9천만원)와 소석회의 미립자에 의한 공정액의 2차 오염과 제품 품질 저하(quality claim) 및 소석회 사용량에 따른 연간 원료비(연간 3억원) 등의 상당한 문제점을 나타내고 있는 실정이다. 아울러 최근 고품위 수산화알루미늄의 공급 요구에 따라 여과시 정제기준이 점차 낮아져 이제는 1mg/$\ell$ 이하를 유지하여야 하는 근본적인 문제에 봉착해있는 실정이다. 그러므로 본 연구에서는 소석회를 사용하는 입상여과법을 대체하기 위한 신공정개발을 추진하였으며, 그동안 카트리지여과법 등의 다양한 실험 결과로부터 최근 필터 보조제를 첨가하지 않는 물리적 여과방법인 세라믹 막 여과법의 적용 가능성을 확인하고 친환경공정인 세라믹 막 여과 실용화 공정 기술을 개발하였다. 세라믹 막 여과 법은 여과 보조제를 사용하지 않으므로 2차적인 슬러지 발생등의 환경문제를 발생하지 않으며, 공정액에 첨가제를 투입하지 않으므로 순환형 친환경공정으로 각광받을 수 있다. 본 연구에서는 고온, 고농도의 NaOH 수용액의 처리에 적합한 막소재와 발생될 수 있는 제반 문제점 등을 파악하였고, 장기간의 실험을 거쳐 최적 투과 압력(Trans membrane pressue), 세정 조건 및 주기, 막재질에 있어서 보강하여야 할 Point, 최적 운전 조건들을 토출해 내었고, 향후 실제 Plant에 적용할 계획이다.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.85-95
• /
• 2018

In this research, a biofilter system equipped with a biofilter process and a humidifier composed of a fluidized aerobic and an anoxic reactor, was constructed to treat odorous waste air containing hydrogen sulfide, ammonia and VOC, frequently generated from pig and poultry housing facilities, compost manufacturing factories and publicly owned facilities. Its optimum operating condition was revealed and discussed. In the experiment of complex feed, the ammonia of fed-waste air was removed by ca. 75% and more than 20% at the stage of the humidifier and the biofilter, respectively. The toluene of the fed-waste air was removed by ca. 20% and more than 70% at the stage of the humidifier and the biofilter, respectively. Therefore the water-soluble ammonia and the water-insoluble toluene were treated mainly at the stage of the humidifier and the biofilter, respectively. In addition, hydrogen sulfide was almost absorbed at the stage of the humidifier so that it was not detected at the biofilter process. In the experiment of ammonia-containing feed, the ammonia of fed-waste air was removed by ca. 65% and 35% at the stage of the humidifier and the biofilter, respectively. Its removal efficiency of ammonia at the stage of the humidifier was 10% less than that in the experiment of complex feed, due to no supply of such carbon source as toluene required in the process of denitrification. In the experiments of complex feed, ammonia-containing feed with and without (instead, glucose) the addition of yeast extract, the absorption rates of ammonia-nitrogen were ca. 0.28 mg/min, 0.23 mg/min and 0.27 mg/min, respectively. The corresponding denitrification rates in the anoxic reactor were 0.42 mg/min, 0.55 mg/min and 0.27 mg/min, respectively. In addition, in the modeling of bubble column(the fluidized aerobic reactor of the humidifier) process, the value of specific surface area(a) of bubbles multiplied by enhanced mass transfer coefficient (E $K_y$) was evaluated to be 0.12/hr.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.141-148
• /
• 2021

In this paper, we propose an algorithm of welding bead detection and evaluation using geodesic active contour algorithm and high pass filter with image processing technique. The algorithm uses histogram equalization and high pass filter as gaussian filter to improve contrast. The image processing techniques smoothens the welding beads reduce the noise on an image. Then, the algorithm detects the welding bead area by applying the geodesic active contour algorithm and morphological ooperation. It also applies the balloon force that either inflates in, or deflates out the evolving contour for a better segmentation. After that, we propose a method for determining the quality of welding bead using effective length and width of the detected bead. In the experiments, our algorithm achieved the highest recall, precision, F-measure and IOU as 0.9894, 0.9668, 0.9780, and 0.8957 respectively. We compared the proposed algorithm with the conventional algorithms to evaluate the performance of the proposed algorithm. The proposed algorithm achieved better performance compared to the conventional ones with a maximum computational time of 0.6 seconds for segmenting and evaluating one welding bead.

• The Journal of Engineering Geology
• /
• v.28 no.3
• /
• pp.465-473
• /
• 2018

The application of singular value decomposition (SVD) filtering is examined for attenuation of the ground-roll in land seismic data. Prior to the SVD computation to seek singular values containing the highly correlatable reflection energy, processing steps such as automatic gain control, elevation and refraction statics, NMO correction, and residual statics are performed to enhance the horizontal correlationships and continuities of reflections. Optimal parameters of SVD filtering are effectively chosen with diagnostic display of inverse NMO (INMO) corrected CSP (common shot point) gather. On the field data with dispersion of ground-roll overwhelmed, continuities of reflection events are much improved by SVD filtering than f-k filtering by eliminating the ground-roll with preserving the low-frequency reflections. This is well explained in the average amplitude spectra of the f-k and SVD filtered data. The reflectors including horizontal layer of the reservoir are much clearer on the stack section, with laminated events by SVD filtering and subsequent processing steps of spiking deconvolution and time-variant spectral whitening.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.1
• /
• pp.57-65
• /
• 2017

This paper presented a method of designing low-power feedback active noise control filter optimized for headphones/earphones. Using constrained optimization, we obtained a high order FIR noise control filter to ensure reasonable noise attenuation performance at high sampling frequency environment. Then using infinite impulse response (IIR) approximation method called Balanced Model Truncation (BMT), we obtained a low order IIR noise control filter suitable for low-power digital signal processing system like headphones/earphones. For further performance improvement, we utilized frequency warping method so that we could obtain more accurately approximated IIR filter and we ensured system stability by reconstructing the low order IIR filter in form of cascaded second order IIR filters. ANC simulation with white noise and stability test verified that the proposed algorithm had superior attenuation performance and better robustness compared to the conventional algorithm.

• Korean Chemical Engineering Research
• /
• v.52 no.3
• /
• pp.378-381
• /
• 2014

We studied the pasteurization effect of the microorganism involved in the water, using ion-exchanging filter made of the Radiation Induced Grafted Polymerization. This ion-exchanging filter is made by the graft polymerization of GMA, after irradiation of electron beam to the non-woven filter. Then, we made the ion-exchanging filter (EtA, DEA, SS) applying ion-exchanging base to the GMA filter. As a result, the density of the ion-exchanging base is shown as 2.38 mol/kg in case of EtA, 1.79 mol/kg in case of DEA and 0.75 mol/kg in case of SS. Through this filter made by this method, we measured the pasteurization power of E. coli. We found very high elimination rate such as log 4.65 in case of SS-dial filter, which is higher as 3.00 times in comparison with EtA, and 1.10 times in comparison with DEA. This data show the result is very excellent comparing with 3,000 CFU/ml. of city water treatment basis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.280-286
• /
• 2013

In this paper, a noise reduction system is proposed for the speech interface in intelligent TV applications. To reduce TV speaker sound which are very serious noises degrading recognition performance, a noise reduction algorithm utilizing the direct TV sound as the reference noise input is implemented. In the proposed algorithm, transfer functions are estimated to compensate for the difference between the direct TV sound and that recorded with the microphone installed on the TV frame. Then, the noise power spectrum in the received signal is calculated to perform Wiener filter-based noise cancellation. Additionally, a postprocessing step is applied to reduce remaining noises. Experimental results show that the proposed algorithm shows 88% recognition rate for isolated Korean words at 5 dB input SNR.