• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.38-44
• /
• 2005

• Journal of Auto-vehicle Safety Association
• /
• v.3 no.2
• /
• pp.17-21
• /
• 2011

Vehicle safety device such as active headrest and rear detection system has been developing as people are interested about rear end collision more than head on or than front. However, there is no any standard or criterion in order to evaluate vehicle safety device for rear end collision. Also there is no test protocol about rear end collision in vehicle experiment. Therefore, this research developed scenario for experiment about rear end collision in vehicle experiment. Also this research evaluated dangerousness about vehicle test and fitness about re-enacting rear end collision using scenario developed using commercial software (PC-Crash) which can re-enact vehicle collision in virtual vehicle experiment. Scenario developed according to statistics from National Highway Traffic Safety Administration and German In-Depth Accident Study. Scenario has twelve cases which composed of Re-LVS (Rear end Leading Vehicle Stop), Re-LVM (Rear end Lead Vehicle Moving) and scenario for evaluation about malfunction of active headrest.

• Journal of Digital Convergence
• /
• v.16 no.9
• /
• pp.173-178
• /
• 2018

The vehicle collision speed in mid and high range can be checked by EDM(Event Driven memory) data recorded when the air bag works. But it's difficult to estimate the low speed of vehicle collision. And estimating the speed is important because the injury level can be changed by the impact speed. The study proposed an estimating algorithm by analysing the images recorded in car blackbox instrument. Low speed rear collision accidents simulated with wire winding motor for various vehicle types. The study estimated the impact speed with the ratio of the distance change between two vehicles and the length change of the number plate of front vehicle. The closer the vehicles are, the larger the plate length is. You can estimate the impact speed with the ratio. The impact speed is calculated with the initial distance for a specific length of number plate in the algorithm. The results can be applied to the linear rear collision because the angle of impact was not considered in this study.

• Proceedings of the KAIS Fall Conference
• /
• 2007.11a
• /
• pp.315-318
• /
• 2007

최근 자동차안전기준이 중요시되면서 안전에 대한 관심이 높아지고 있다. 본 연구는 FMVSS301 및 자동차안전기준 제 91조에 해당하는 시험조건으로 후방추돌시 인체상해를 방지하기위해 뎀퍼가 장착된 자동차시트의 메카니즘을 설계 및 해석을 하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.51-57
• /
• 2010

In recent years, a large number of study for rear impact has been conducted and as a result of study, researchers proposed the neck injury criteria and test procedures. But many questions, related to injury criteria and dummy biomechanical levels, remain unresolved. In recently reports, rear impact motions of BioRIDIIg is not humanlike but better than other dummy(HybridIII, RID3d). So, in this paper, 4 times sled test would be done to find the substitutable neck injury criteria in BioRIDIIg. To review corelation trend with neck injury critera and head-neck movement, we compared with recently announced neck injury criteria(NIC, Nkm, T1 ect.) and head-neck X-direction movement in BioRIDIIg. Finally, we find the head-neck X-direction movement on head C.G to T1 point may be considerable as the additional neck injury criteria.

• Composites Research
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2023

Although the development of transportation means has realized the right to mobility for the disabled who have difficulty in moving, it can be said that the improvement of the safety of passengers with disabilities that can occur in a car accident is lower than that of ordinary passenger seats. In particular, in the case of a rear-end collision that can occur suddenly, it is a reality that disabled passengers are vulnerable to head and neck injuries. Therefore, in this study, a multi-layer headrest foam that divides the headrest into three parts in the coronal plane was proposed to improve the head and neck injury index of disabled passengers in the vehicle in the event of a rear-end collision of a wheelchair transport vehicle. A range of stress scale factors was selected to give various compressive characteristics of the foam through low-speed rear-end collision analysis through a simple model, and GA optimization was performed by specifying the range as a parameter. Through the optimization result, the phase relationship between HIC and NIC was analyzed according to the compression characteristics of the layers. HIC responded most sensitively to the compression characteristics of the front layer and NIC responded to the compression characteristics of the mid layer, and the compression characteristics of the rear layer showed the lowest. A normal headrest and an optimized multi-layer headrest were placed in the validation model to analyze the low-speed rear-end collision sled test, and HIC and NIC were derived lower in the multi-layer headrest than in the general headrest. The compression behavior of the multi-layer headrest was also clearly shown, and it was verified that the multi-layer headrest was effective in improving the injury index of the head and neck compared to the general headrest.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.5-10
• /
• 2012

Whiplash is the most frequent injury among occupants in low speed rear-end car collision. The aim of this paper is to analyze thecorrelation between influence parameters of head restraints and whiplash injury criteria.In this paper, DFSS (Design for Six Sigma) method is used for optimum design of head restrains. Four control factors of head restraints have selected by function matrix method. The effects of the control factors have been experimentally evaluated by using a sled pulse from 16km/h relative velocity which is suggested by KNCAP (Korean New Car Assessment Program). In order to reduce the noise factors of dynamic tests, whiplash tests were repeated twice. By using DFSS, the correlation between control factors and injury criteria has been comprehended.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.20-24
• /
• 2010

The position of the automobile's head restraint is very important for the neck injury in rear end collision. This study is about influence of the head restraint height and distance on neck injury during rear end collision. The effects of the position have been evaluated experimentally. The neck injuries are calculated by the relative acceleration between the upper and lower neck. As a result, It is found that the head restraint should be close enough to the back of the head and high enough to the top of the head.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.130-138
• /
• 2000

The position of the automobile seat back is very important for the neck injury in the rear-end collisions. The effects of the position have been evaluated experimentally. A sled simulator is utilized with a velocity of 33 km/h. The position is varied by the angle of seat back from 25 to 65 degrees. All the configurations of the seat are fixed except the angle. The neck injuries are calculated by the equations accepted in the industries. Also, the sled tests with other velocities are carried out for the comparison study. Using the results of the test, the effects of seat back strength are discussed to minimize the occupant neck injury in rear end collisions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.3
• /
• pp.139-150
• /
• 2000

Although a number of neck injuries are generated, the data which quantify the kinematic response of the human head and cervical spine in low-speed rear-end automobile collisions is very limited. On this problem, just few in vitro experimental research or some experimental research using dummy on neck injury by rear-end collision was conducted, thus systematic research is requested on full scale injury mechanism. An occupant model for the response of the occupant subject to rear-end collision using commercial dynamics package DADS was developed. Developed model shows more close agreement with the experimental data compared with the MADYMO simulation results for the cases of ${\delta}V=16$ kph in sled test. For the case of ${\delta}V=8$ kph and 33.5 kph with production seat, model also shows its reliable response compared with experimental results using Hybrid III and Hybird III with RID.