• The korean journal of orthodontics
• /
• v.34 no.1 s.102
• /
• pp.33-45
• /
• 2004

The purpose of this experimental study was to determine appropriate magnitude of the Gable bends to produce maximum retraction of the anterior teeth. The Calorific Machine was used to illustrate the tooth movement in three dimension. The experimental teeth except the first premolar were embedded in the artificial alveolar bone part. In a series of experiments, the extraction space was closed using arch wires with bull loops into which the gable bends of $10^{\circ},\;20^{\circ},\;30^{\circ}$ degrees were incorporated. The experiments were repeated three times for each degree of the gable bend. Before and after the space closure, radiographs were taken in the sagittal and occlusal directions using occlusal films. Analysis of variance and Scheffe post hoc test were used to determine significant differences among the three groups. The following results were obtained. 1. As magnitudes of the gable bends increased, more bodily anterior tooth movement was seen and the distance of retraction also increased. 2. As magnitudes of the gable bends increase, the amount of posterior tooth protraction decreased while intrusive and buccal movement increased. 3. The arch was coordinated by distal-in rotation of the canine and mesial-in rotation of the second premolar adjacent to the extraction space.

• The korean journal of orthodontics
• /
• v.32 no.3 s.92
• /
• pp.165-174
• /
• 2002

The purpose of this study was to compare on masse retraction of six anterior teeth with separate canine retraction in the amount of the anchorage loss and the retraction of the anterior teeth. The subjects consisted of 30 adult female patients with Angle Class 1 malocclusions who were treated by .022' straight wire appliance with 4 first permolar extraction. They were composed of two groups. Group 1 consisted of 15 subjects, whose six anterior teeth were retracted by on masse retraction. Group 2 consisted of 15 subjects, whose canines were retracted separately. Pre-treatment and post-treatment lateral cephalometric radiographs were analyzed. All data were processed statistically with independent samples t-test, and the conclusions were as follows. 1. There was no significant difference in the amount of the anchorage loss between two groups(p>0.05). 2. There was no significant difference in the amount of the retraction of the anterior teeth between two groups(p>0.05). 3. There was a significant difference in the amount of the inclinational change of the upper incisors between two groups. It was greater in Group 2. 4. There was a significant difference in the vertical positional change of the upper incisal edges between two groups. The upper incisal edges in Group 2 were more extruded than Group 1 by about 1mm. 5. There was no significant difference in the vertical positional change of the root apex of the upper incisors between two groups(p>0.05). And there was no significant difference in the vertical positional change of the upper molar(p>0.05).

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.377-386
• /
• 2000

At the finishing stage, the use of asymmetric elastics to treat mild skeletal and dental midline discrepancies often creates several side effects such as canted occlusal plane, tipped incisors and unesthetic results. This report presents the clinical cases with midline discrepancies, following a differential diagnosis, optimal mechanics, and considerations in treatment. Differential diagnosis and treatment mechanics with three-piece basal archwire can obtain predictable midline correction with minimal side effects.

• The Journal of the Korean dental association
• /
• v.40 no.10 s.401
• /
• pp.787-794
• /
• 2002

• 대한관절경학회:학술대회논문집
• /
• 2009.10a
• /
• pp.62-63
• /
• 2009

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.341-348
• /
• 1996

The efficiency of maxillary canine retraction by means of sliding mechanics along an 0.016 continuous labial arch and an 0.009 inch in diameter with a lumen of 0.030 inch NiTi closed coil spring was compared with that using the same NiTi closed coil spring and Molar Anchoring Spring(MAS) which was designed by author. MAS was made of .017" X .025" TMA wire and was given 60 degree tip-back bend on the wire close to the molar tube. This study was designed to investigate molar and canine root control during retraction into an extraction site with continuous arch wire system. Two techniques were tested with a continuous arch model embedded in a photoelastic resin. A photoelastic model was employed to visualize the effects of forces applied to canine and molar by two retraction mechanics. With the aid of polarized light, stresses were viewed as colored fringes. The photoelastic overview of the upper right quadrant showed that stress concentrations were observed in its photoelastic model. The obtained results were as follows. 1. Higher concentration of compression can be seen clearly at the distal curvature of the canine and mesial curvature of the molar and premolar when NiTi closed coil spring was applied only, which means severe anchorage loss of the molar and uncontrolled tipping of the canine. 2. The least level compression was presented at the mesial root area of the molar and premolar, and mesial root area of the canine when NiTi closed coil spring and MAS were used simultaneously. Especially mesial alveolar crest region of the canine was shown moderate level of compression that means MAS can be used as a appliance for anchorage control and prevention of canine extrusion and uncontrolled tipping during canine retraction.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.199-207
• /
• 2001

The segmented TMA T-loop spring, used for reciprocal space closure and described by Burstone, was used to achievebodily movement of canine. Photoelastic analysis is a technique for the transformation of internal stress into visible light patterns. The two-dimensional photoelastic stress analysis was performed, and stress distribution was recorded by photography. The purpose of this study was to visualize photoelastically the distribution of forces transmitted to the alveolus and surrounding structures using new segmented TMA T-loop spring for canine retraction. The results were as follows: 1. Decreased activation produced decreased stress of upper 1st. premolar extraction site and increased intrusive stress of upper 1st. molar, regardless of T-loop position. 2. At 5mm activation, More posterior positioning of T-loop Produced an increased stress in upper 1st. premolar extraction site. 3. At 3mm activation, More posterior positioning of T-loop produced an increased stress in upper 1st. premolar extraction site and mesial lower half of upper 1st. molar mesio-buccal root. 4. At 1mm activation, More anterior positioning of T-loop produced an increased stress in upper mesial and blew apex area of upper canine root. 5. 0.25 B/L ratio and 3mm activation produced bodily movement of canine. To summarize, desired tooth movement and anchorage requirement is possible by altering the activation and mesio-distal position of the T-loop spring.

• Clinics in Shoulder and Elbow
• /
• v.16 no.2
• /
• pp.148-152
• /
• 2013

We report a case of simultaneous anterior and posterior interosseous nerve syndrome in association with shoulder arthroscopy. Shoulder arthroscopy was performed in a 45-year-old male patient with left shoulder instability. In the right lateral decubitus position, under general anesthesia, traction was applied with elbow extension for 2 hours. One week after surgery, the patient revisited the clinic for weakness of the flexor of the thumb, index finger, and extensor of the fingers. Recovery was not achieved after four months of observation. Therefore, nerve exploration was performed in the anterior and posterior interosseous nerve and hourglass-like fascicular constriction was detected in the posterior interosseous nerve. The area of constriction was removed and epineural neurorrhaphy was performed. Three months after exploration, the extension function of the fingers was recovered. Recovery was achieved gradually, and, five months after nerve exploration, the symptoms were completely recovered. Simultaneous anterior and posterior interosseous nerve syndrome following shoulder arthroscopy is rare. However, it could occur due to the traction and position of the patient. Thus, the operator should be careful of traction and position of the patient.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.98-113
• /
• 2007

Objective: The purpose of this study was to evaluate the displacement pattern and the stress distribution shown on a finite element model 3-D visualization of a dry human skull using CT during the retraction of upper anterior teeth. Methods: Experimental groups were differentiated into 8 groups according to corticotomy, anchorage (buccal: mini implant between the maxillary second premolar and first molar and second premolar reinforced with a mini Implant, palatal: mini implant between the maxillary first molar and second molar and mini implant on the midpalatal suture) and force application point (use of a power arm or not). Results: In cases where anterior teeth were retracted by a conventional T-loop arch wire, the anterior teeth tipped more postero-inferiorly and the posterior teeth moved slightly in a mesial direction. In cases where anterior teeth were retracted with corticotomy, the stress at the anterior bone segment was distributed widely and showed a smaller degree of tipping movement of the anterior teeth, but with a greater amount of displacement. In cases where anterior teeth were retracted from the buccal side with force applied to the mini implant placed between the maxillary second premolar and the first molar to the canine power arm, it showed that a smaller degree of tipping movement was generated than when force was applied to the second premolar reinforced with a mini implant from the canine bracket. In cases where anterior teeth were retracted from the palatal side with force applied to the mini implant on the midpalatal suture, it resulted in a greater degree of tipping movement than when force was applied to the mini implant between the maxillary first and second molars. Conclusion: The results of this study verifies the effects of corticotomies and the effects of controlling orthodontic force vectors during tooth movement.

• The korean journal of orthodontics
• /
• v.33 no.4 s.99
• /
• pp.259-277
• /
• 2003

This study was designed to investigate the position of anteroposterior center of resistance for genuine intrusion and the mode of change of the minimum distal force for simultanous intrusion and retraction of the upper and lower incisors according to the increase of labial inclination. For this purpose, we used the three-piece intrusion arch appliance and three-dimensional finite element models of upper and lower incisors. 1. Positions of the center of resistance in upper incisors according to the increase of the labial inclination were as follows; 1) In normal inclination situation, the center of resistance was located in 6m behind the distal surface of the lateral incisor bracket. 2) In $10^{\circ}$ increase of the labial inclination situation, the center of resistance was located in 9mm behind the distal surface of the lateral incisor bracket. 3) In $20^{\circ}$ increase of the labial inclination situation, the center of resistance was located in 12m behind the distal surface of the lateral incisor bracket. 4) In $30^{\circ}$ increase of the labial inclination situation, the center of resistance was located in 16m behind the distal surface of the lateral incisor bracket. 2. Positions of the center of resistance in lower incisors according to the increase of the labial inclination were as follows; 1) In normal inclination situation, the center of resistance was located in 10mm behind the distal surface of the lateral incisor bracket. 2) In $10^{\circ}$ increase of the labial inclination situation, the center of resistance was located in 13m behind the distal surface of the lateral incisor bracket. 3) In $20^{\circ}$ increase of the labial inclination situation, the center of resistance was located in 15m behind the distal surface of the lateral incisor bracket. 4) In $30^{\circ}$ increase of the labial inclination situation, the center of resistance was located in 18m behind the distal surface of the lateral incisor bracket. 3. The patterns of stress distribution were as follows; 1) There were even compressive stresses In and periodontal ligament when intrusion force was applied through determined center of resistance. 2) There were gradual increase of complexity in compressive stress distribution pattern with Increase of the labial inclination when intrusion and retraction force were applied simultaneously. 4. With increase of the labial inclination of the upper and lower incisors, the position of the center of resistance moved posteriorly. And the distal force for pure intrusion was increased until $20^{\circ}$increase of the labial inclination.