• Applied Microscopy
• /
• v.12 no.2
• /
• pp.11-22
• /
• 1982

The morphological development of Mycoplasma pneumoniae attached to solid surfaces was examined by light and electron microscopies. Critical point drying and carbon replication techniques revealed that during the growth cycle of developing microcolonies, the morphological form coincided with the pH of the culture. M. pneumoniae appeared to have a well defined morphology associated with age of the culture. The organisms were dimorphic, with round cells capable of reproduction and segments consisting of a spindle shaped body with one pointed and one knob-like end. Starting with single cells, there were the following stages in the development of a culture: replication stage through binary fission and segmentation, stage of confluency, and a degeneration stage into rough spherical forms. The round cells appearrd to replicate by binary fission during the lag and early log phases of growth, while spindle segments replicated by segmentation during most of the logarithmic growth. The growth of the filaments and replication of the segments occured at the knob-like ends, showing a type of polarity, and formed a meshwork across the surface. This development could be cycled under favorable growth conditions, but the culture aged and when the conditions became adverse(e.g. pH 6.8 or lower), filamentous cells converted to spherical forms, losing their reproductive capability.

• Korean Journal of Food Science and Technology
• /
• v.43 no.6
• /
• pp.683-688
• /
• 2011

This study was conducted to investigate the effects of different cooking methods on the nutrient composition of genetically modified (GM) provitamin A(PA)-biofortified rice. PA-biofortified rice was subjected to different cooking methods, namely boiling and a soaking, steaming and roasting process. The proximate components (starch, protein, lipid and ash) of raw PA-biofortified rice were similar to those found in the parental non-GM rice, and were not significantly affected by a conventional boiling treatment. When compared with raw rice, boiled PA-biofortified rice showed a similar nutrient composition, despite a slight reduction in a majority of its amino acid contents. However, the PA-biofortified rice that underwent the soaking/steaming/roasting process exhibited a significant reduction in a majority of its amino acids and mineral contents. This procedure also led to a significant reduction in carotenoid contents. The overall results of this study demonstrate that using a conventional boiling method for PA-biofortified rice retains nutrients better than a soaking/steaming/roasting method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.100-107
• /
• 2018

The objective of this study is to assess the strengthening effects of fiber reinforced polymer(FRP) sheets such as Carbon fiber, Glass fiber, and PET(polyethylene terephthalate) on reinforced concrete flexural members. Variables of theoretical analysis are types of strengthening materials, material properties and amount of strengthening materials. A virtual flexural member without FRP sheets was created as a control specimen to understand the structural behavior of the non-strengthened specimen in terms of elastic and ultimate cross section. In total, 11 specimens including one non-strengthened and ten strengthened specimens were investigated. Various variables such as types of strengthening, strengthening properties, and amount of strengthening were studied to compare the behavior of the control specimen with those of strengthened specimens with regard to moment-curvature relationship. Results of theoretical analysis showed that the moment capacity of strengthened specimens was superior to that of the control specimen. However, the control specimen indicated the best ductility among all the specimens. As the amount of strengthening increased, flexural performance was improved. Furthermore, the results indicated that the ductile effect of members was affected by the ultimate strain of FRP sheets. The strengthening effect on the damaged member was similar to that on the non-damaged one since there was less than 10% difference in terms of flexural strength and ductility. Therefore, even if a damaged member is treated as non-damaged for analysis there is probably no noticeable difference.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2002.11a
• /
• pp.502-511
• /
• 2002

컴퓨터의 기술적 발전은 사회 여러 분야에 막대한 영향을 끼쳤다. 그중 악보인식분야에도 커다란 영향을 주었다. 그러나, On-line 상에서 그린 악보를 실시간으로 정형화된 악보형태로 변환하는 처리에 대한 연구가 미흡하여 이에 대한 연구가 필요하다. 본 논문에서는 실시간으로 악보를 인식하고, 사용자의 편의를 도모하기 위해 DP(Dynamic Programming) 매칭 법을 이용한 On-Line 악보인식에 관한 방법을 제안하였다. 본 연구에서는 실시간으로 입력되는 악상기호를 인식하기 위해, 가장 유효한 정보인 악상 기호내의 방향, x, y 좌표를 이용하여 벡터형태로 추출한 후 음표와 비음 표(쉼표, 기타기호)의 두개의 그룹으로 나누어진 표준패턴과의 DP매칭을 통해 인식한다. 먼저 tablet을 통해 실시간으로 악상 기호를 입력할 때 생기는 x, y좌표를 이용하여, 펜의 움직임에 대한 16방향 부호화를 수행한다. 음표와 비 음표를 구분하기 위한 시간을 줄이고자 16방향 부호화를 적용하지 않고 사사분면부호화를 적용한다. 음표를 약식으로 그릴 경우 음표 머리에 해당하는 부분의 좌표는 삼사분면에 분포하고, 폐곡선의 음표일 경우에는 좌표가 사사분면에 고르게 나타난다. 폐곡선을 제외한 음표의 머리는 폐곡선과 같은 조건이면서 입력받은 y좌표 값들 중에서 최소 값과 최대 값을 구한 다음 2로 나눈 값을 지나는 y좌표의 개수가 임의의 임계값 이상이면 음표로 판단한다. 위 조건을 만족하지 않을 경우 비 음표로 취급한다. 음표와 비 음표를 결정한 다음, 입력패턴과 표준패턴과의 DP매칭을 통하여 벌점을 구한다. 그리고 경로탐색을 통해 벌점에 대한 각각의 합계를 구해 최소 값을 악상기호로 인식하였다. 실험결과, 표준패턴을 음표와 비음표의 두개의 그룹으로 나누어 인식함으로써 DP 매칭의 처리 속도를 개선시켰고, 국소적인 변형이 있는 패턴과 특징의 수가 다른 패턴의 경우에도 좋은 인식률을 얻었다.리되고 이원화된 코드체계와 데이터 형태의 이질화를 통일하는 방법으로 데이터웨어하우스 시스템을 제시하였다. 결국 병원에서 데이터웨어하우스 시스템의 구축은 임상, 연구, 교육의 유기적 순환관계를 정립하여 지식의 순환적 고리인 수집, 공유, 확산, 재창출을 지속적 유지할 수 있는 인프라를 구축해 준다. 반면 상이한 정보들간의 충돌과 이에 따른 해석의 오류로 잘못된 의사결정을 위한 정보를 제공할 수 있고 기초정보의 접근 및 추출의 유용성에 의해서 정보유출에 대한 문제가 한계점으로 나타났다.로세스 개선을 위해서 무엇을 정말로 필요로 하는지를 밝힘으로써, 한국 소프트웨어 산업의 현실적인 특수성을 고려한 소프트웨어 프로세스 평가와 개선 모델의 개발을 위한 기초적인 자료를 제공할 것으로 예상된다. 또한, 본 연구 결과는, 우리나라 소프트웨어 조직들이 실제로 무엇을 필요로 하는지를 밝힘으로써, 우리나라의 소프트웨어 산업을 육성하기 위한 실효성 있는 정책 입안을 위한 기초 자료를 제공할 것으로 예상된다.를 검증하려고 한다. 협력체계 확립, ${\circled}3$ 전문인력 확보 및 인력구성 조정, 그리고 ${\circled}4$ 방문보건사업의 강화 등이다., 대사(代謝)와 관계(關係)있음을 시사(示唆)해 주고 있다.ble nutrient (TDN) was highest in booting stage (59.7%); however no significant difference was found among other stages. The concentrations of Ca and P were not different among mature stages. According to these results, the yellow ripe period is appropriate to harvest the whole crop rice for forage considering

• Korean Journal of Food Science and Technology
• /
• v.34 no.2
• /
• pp.207-212
• /
• 2002

This study was to examine the characteristics in the texture of acorn Mooks (acorn starch jelly) with different conditions to prepare acorn starch. By texture profile analysis, hardness and chewiness with 50% deformation were increased with increasing soaking days. Hardness of acorn Mook, measured by texture analyzer, showed significantly difference between the samples, and was closely related to the content of non-starchy substances and their intrinsic viscosity. The observation of microstructure through a scanning electron microscope (SEM) showed that acorn Mook showed finer and more fibrous structure than control(0-0), sample without soaking of acorn and sediments. Sensory characteristics of acorn Mook were affected by soaking treatment. The result of acceptance test on acorn Mooks indicated that the color and hardness increased with the increase of soaking days of acorn nuts and soaking times of sediments. There was a little difference between the samples in astringency taste. Their overall acceptability also increased except for 4-2 sample (i.e., soaking of acorn, 4 days; soaking of sediments, 2 times) and 4-3 sample (i.e., soaking of acorn nuts, 4 days; soaking of sediments, 3 times). As the results, the color, light brown, and the taste, a little astringency with consistency, were important factors of acorn Mook.

• Journal of Korean Society of Forest Science
• /
• v.102 no.1
• /
• pp.113-121
• /
• 2013

It has been known that edges of forest fire areas play significant roles in post-fire change of forest ecosystem and recovery process. The purpose of this study was to analyze the relationships between edge formation of burned forests and landscape characteristics with consideration on spatial autocorrelation. Samcheok fire site burned in 2000 was selected as the study area. Seven hundred fifty three of 500 $m^2$ grid cells were generated for measuring landscape characteristics. This study used the topographic variables including slop, elevation, topographic wetness index, solar radiation index and proportions of fuel and land use types. In delineating landscape characteristics correlation analysis with modified t-test were performed for exploring the relationships between edge formation and landscape characteristics. The results indicated that edge formation of burned forests was positively correlated with most variables including TWI, SRI, water, paddy, developed, farm, grass, bare soil, and negatively related with elevation, slope and all fuel types. Especially TWI (r=0.437) showed a strong positive correlation with edge formation. According to the results, edge of burned forests were likely formed when proportions of heterogeneous land use types were high with mild slope and low elevation.

• Journal of the Korean Geosynthetics Society
• /
• v.12 no.3
• /
• pp.15-22
• /
• 2013

By changing from ballasted track to concrete slab track, new type railroad subgrade is strongly required to satisfy strict regulations for displacement limitations of concrete slab track. In this study, sensitivity analysis was performed to assess the design characteristics of new type reinforced railroad subgrade, which could minimize residual settlement after track construction and maintain its function as a permanent railway roadbed under large cyclic load. With developed design program, the safety analysis (circular slip failure, overturning, and sliding) and the evaluation of internal forces developed in structural members (wall and reinforcement) were performed according to vertical installation spacing and stiffness of short and long geotextile reinforcement. Based on this study, we could evaluate the applicabilities of 0.4 H short geogrid length with 0.4 m vertical installation spacing of geotextile as reinforcement and what the ground conditions are for the reinforced railroad subgrade. And also, we could grasp design characteristics of the reinforced railroad subgrade, such as the importance of connecting structure between wall and reinforcement, boundary conditions allowing displacement at wall ends to minimize maximum bending moment of wall.

• Journal of The Korean Association For Science Education
• /
• v.33 no.7
• /
• pp.1312-1328
• /
• 2013

In this study, we investigated preservice secondary science teachers' uses of curriculum materials in curriculum design through a case study. Two preservice science teachers at a college of education in Seoul participated in this study. We interviewed them about their beliefs on teaching and learning prior to their teaching students. We then observed their teaching and collected all of the teaching/learning materials. Semi-structured interviews were also conducted before and after the instructions. Their uses of curriculum materials were systematically analyzed in the aspects of reading, evaluating and adapting curriculum materials. The analyses of the results revealed that their uses of curriculum materials had a significant difference in curriculum design. There was a difference in the way of reading curriculum materials that derived from different perspectives of curriculum reconstruction. The perspectives of curriculum reconstruction also affected the way of adapting curriculum materials. While the 'adding' was an important adaptation in curriculum design with active perspectives, the 'changing' was an important one with passive perspectives. In addition, the degrees of evaluating curriculum materials from the learners' views depended on their beliefs on teaching and learning. It was also connected to qualitative differences of adaptation in 'increasing student control over an activity' and 'increasing teacher control over an activity'. Educational implications of these findings are discussed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.171-181
• /
• 2009

The objective of this study was to analyse stress distribution of maxillary complex by use of face mask. The construction of the three-dimensional FEM model was based on the computed tomography(CT) scans of 13.5 years-old male subject. The CT image were digitized and converted to the finite element model by using the mimics program, with PATRAN. An anteriorly directed force of 500g was applied at the first premolar 45 degrees downwards to the FH plane and at the first molar 20 degrees downwards to the FH plane. When 45 degrees force was applied at maxillary first premolar, there were observed expansion at molar part and constriction at premolar part. The largest displacement was 0.00011mm in the x-axis. In the y-axis, anterior displacement observed generally 0.00030mm at maximum. In the z-axis, maxillary complex was displaced 0.00036 mm forward and downward. When 20 degrees force was applied at maxilla first molar, there were observed expansion at lateral nasal wall and constriction at molar part. The largest displacement was 0.001mm in the X-axis. In the Y-axis, anterior displacement observed generally 0.004mm at maximum. In the Z-axis, ANS was displaced upward and pterygoid complex was displaced downward. The largest displacement was 0.002mm.

• Tuberculosis and Respiratory Diseases
• /
• v.53 no.2
• /
• pp.101-112
• /
• 2002

Background : Toluene diisocyanate(TDI) is a leading cause of occupational asthma. However, the pathogenesis of TDI-induced asthma is largely unknown because there is no suitable animal model. Materials and Methods : We developed a murine model of TDI-induced asthma by performing two sensitization with 3% TDI and one challenge with 1% TDI using ultrasonic nebulization. Results : Similar to occupational asthma in humans, murine TDI-induced asthma includes findings 1) increased inflammatory cells, including neutrophils and eosinophils, 2) histologic changes, including infiltration of inflammatory cells around bronchioles, thickened airway epithelium, contraction of bronchioles, and accumulation of mucus and debris in the bronchioles, 3) increased MMP-9 activity in inflammatory cells in the airway lumen, 4) airway hyperrespnosiveness. Administraion of an MMP inhibitor, MMPI-I, remarkably reduced all these pathophysiological findings. Conclusion : Therefore, we conclude that TDI-induced occupational asthma is associated with the induction of MMP-9 in inflammatory cells, and the inhibition of MMP-9 may be a good therapeutic strategy.