• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.2
• /
• pp.193-201
• /
• 2014

This paper presents the development of simulation system on EPB shield TBM Hood operation. In recent, EPB shield TBM is widely used in the tunnel construction. Since the hood system of the EPB shield TBM is most important to excavate the tunnel, it is necessary to perform the simulation of hood system to investigate the design and operation parameters prior to tunnel construction. In order to carry out this study, the scaled simulation system was designed and developed. The model tests were performed to verify the developed system. During the simulation, the earth pressures developed in the chamber during tunnelling were measured to evaluate the operation technique. The test results obtained by the developed simulation system show clearly the similar behaviour of TBM hood compared with the field data. It was also found that the ground loss during tunnelling is dependent on the change of earth pressure in chamber. Therefore, the simulation system developed in this study will be very useful to evaluate the operation technique of the TBM hood prior to tunnel construction. In addition, this system will be applied in a various condition of ground to get the operating information.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.398-408
• /
• 2023

This work developed a hood and filter for antibacterial protective clothing for medical powered air purifying respirators (PAPR) that can be used in medical settings and quarantine against infectious diseases such as Zika virus, Middle East respiratory syndrome (MERS), and coronavirus disease-19 (COVID-19). The hood material of the protective clothing was made of polypropylene spunlace nonwoven fabric (SFS) was used for withstand wind pressure and external physcial pressure. Forthermore, in order to reduce the user's risk of infection, phytoncide-based materials were used on the outer-surface of the hood to achieve a 99.9% antibacterial effect, and the inner-surface were treated with hydro-philic materials to improve absorbency by 25%. In addition to evaluating the artificial blood penetration resistance, dry mi-croorganism penetration resistance, wet bacteria penetration resistance, and bacteriophage penetration resistance required for medical protective clothing hoods, it received a passing evaluation of levels 2-6. Meanwhile, as a result of evaluating the performance of the antibacterial treated spunlace high efficiency particulate air (HEPA) filter, excellent antibacterial properties, dust removal rate, and differential pressure effect were confirmed. All performance evaluations were conducted by an accredited certification body in accordance with the medical PAPR certification standards.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.293-294
• /
• 2001

자동차 엔진을 구성하는 소재 가공시에 냉각, 절삭용구와 가공표면의 용접현장(welding), 고온에서의 마모방지와 잔열로 인한 비틀림(distortion) 방지 등을 목적으로 사용되는 수용성(soluble) MWFs (Metalworking Fluids)의 기능에 필요한 구성물질인 기유(base oil)와 첨가제(additive)가 건강상 장해를 유발한다고 알려지고 있다(김신범, 1997). 하지만 수용성 MWFs를 사용하여 소재를 가공하는 산업현장에서는 MWFs 미스트 발생제어를 공정 상부에 외부식 후드를 국소적으로 설치하는 것이 일반적인 방법이다(Fig.2). (중략)

• Proceedings of the SAREK Conference
• /
• 2007.06a
• /
• pp.215-215
• /
• 2007

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.32 no.11
• /
• pp.63-68
• /
• 2003

주방환기의 계획에 있어서 조리시 발생하는 오염물질을 적절히 배기시키는 것이 가장 중요하다. 기구의 배치와 발열량을 평가하고 후드의 위치와 종류 그리고 덕트직경과 경로를 결정하며 적정한 풍량을 제거하기 위한 배기팬을 선정한다. 그러나 일반적인 실내 공기밸런스 계획을 시행함에도 불구하고 배기된 체적에 해당하는 풍량을 보충 공급하는 방식에 대한 고려는 현재 상대적으로 부족한 상태이다.

• Journal of the Korean Professional Engineers Association
• /
• v.27 no.6
• /
• pp.10-20
• /
• 1994

• KOREAN POULTRY JOURNAL
• /
• v.12 no.3 s.125
• /
• pp.88-91
• /
• 1980

• 베이커리
• /
• no.7 s.312
• /
• pp.60-61
• /
• 1994

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3363-3369
• /
• 2014

Recently, considerable effort has been made to maintain a pleasant and safe indoor environment in buildings. For this, the use of a ventilation system attached to a range hood in kitchens has prevailed. Accordingly, diversiform designs for range hoods have been used. Press molding is normally used for range hood construction for several reasons. On the other hand, its economic efficiency is low in the case of a small production work. Considerable research has been carried out to solve this problem and it is believed that it is useful to use the change core method to develop molds. This study designed the core of a mold using the change core method and a total of four processes were used in its manufacture. As a result, the press molds, which are needed for shorter production runs and whose form is changeable, were developed. In addition, after the measurements in three-dimensions, the specimen passed a test within a tolerance of ${\pm}2.00mm$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.123-131
• /
• 2006

The majority of pedestrian fatalities and injuries are caused by vehicle-pedestrian accidents. Recently, it has been recognized as a serious problem. Injuries of occupants in a vehicle have been decreased considerably. However, efforts for protection of pedestrians are still insufficient. These days, many advanced industries are striving for a better protection of pedestrians by using an active hood lift system, rather than reforming the existing structure. In this research, the active hood lift system is designed to enhance the performance for protection. The active hood lift system is analyzed by using the nonlinear finite element method. An optimization problem is formulated by incorporation of the analysis results. Orthogonal arrays are utilized to solve the formulated problem. An iterative optimization algothrithm using orthogonal arrays is utilized for design in the discrete space. It is found that the method can remarkably decrease the number of function evaluations.