• 제목/요약/키워드: 후관절

검색결과 32건 처리시간 0.026초

경추부의 후관절 나사못 고정술에서 단피질삽입법과 양피질 삽입법 간의 특성에 관한 비교 (Comparisons of Unicortical and Bicortical Lateral Mass Screws in the Cervical Spine : Safety vs Strength)

  • 박춘근;황장회;지철;이재언;성재훈;최승진;이상원;;박성찬;조경석;박춘근;강준기
    • Journal of Korean Neurosurgical Society
    • /
    • 제30권10호
    • /
    • pp.1210-1219
    • /
    • 2001
  • 서 론 : 후방 경유 경추 융합을 위한 후관절 금속판 고정술은 외상성 및 퇴행성 불안정성의 치료에 효과적인 방법이다. 후관절 금속판 고정의 안정성은 여러 가지 인자에 의해 결정된다. 이중 하나가 나사못의 삽입깊이이다. 이 방법이 처음 소개될 때에는 양피질골성 삽입이 이용되었다. 외과의사의 관심은 어떻게 안전하면서 생역학적으로 강력한 고정을 얻느냐에 있다. 목 적 : 이 연구의 목적은 사체에서 단피질성과 양피질성 나사못 삽입술을 시행한 후 안전성, pull-out 강도, 방사선학적 특성을 분석하고 나사못의 삽입에 대한 교육 훈련의 수준에 따른 영향을 평가하는데 있다. 방 법 : 평균 나이 78.9세인 21구의 사체에 대하여, Magerl의 기술을 변형하여 C3-C6(n=168)까지 3.5mm AO 나사못을 양쪽 후관절에 삽입하였다. 수술중 방사선 사진영상은 사용되지 않았다. 오른 쪽(단피질성 삽입)은 14mm 나사못(11mm의 유효 길이)을 이용하고, 왼쪽은 양피질성 삽입을 시도하였다. 각 사체는 3개의 군으로 나누어 척추 수술 수련의 수준이 다른 받은 3명의 척추 외과 의사들(전임 강사, 임상 강사, 수석 레지던트)이 수술을 시행했다. 수술 후 경추를 떼어내어 나사못의 위치를 육안적으로 확인하고 방사선학적으로 안정성과 삽입 위치 (1,2,3)를 평가하였다. 척수, 후관절, 신경근과 척추 동맥에 대한 나사못의 위치를"만족할 만한","위험한", 그리고"직접적인 손상"으로 구분하였다. material testing machine을 이용하여 모든 나사못에 대해서 Pull-out 강도를 측정하였다. 결 과 : 대다수의 나사못(92.9%)은 만족할 만한 상태였다. 전예에서 척수에 대한 위험성은 없다. 오른 편(단피질성 : 14mm) 나사못의 98.9%는"만족할 만한"에 속했다. 그리고 왼쪽 편(양피질성)의 68.1%는"만족할 만한"에 속했다. 양피질성 나사못 군에서 5.8%의 척추 동맥에 대한 직접적인 손상이 있었고 신경근의 직접적인 손상 발생율은 17.4%였다. 반면에 단피질성 나사못 군에서는 이들에 대한 직접적인 손상은 없었다. 양피질성 나사못에서 보인"직접 손상"의 거의 대부분은 외과 의사의 경험 부족으로 발생하였다. 나사못의 안정성과 삽입 위치 사이에는 특별한 관련이 없었다. 모든 나사못의 pull-out 강도는 $542.0{\pm}296.6N$였다. 단피질성에 있어서의 pull-out 강도($519.0{\pm}289.9N$)와 양피질성($565.2{\pm}306N$) 나사못에는 아무런 통계학적으로 의미있는 차이점을 발견할 수 없었다(p>0.05). 나사못 삽입위치와 pull-out 강도 사이에는 의미있는 차이가 없었다. 결 론 : 이번 연구는 경추 후관절 나사못 고정술시 단피질성과 양피질성 나사못의 안정성과 효능을 집중적으로 알아보았다. 명백한 것은 14mm의 나사못(효과적인 길이는 11mm)이 보다 긴 양피질성 나사못 보다 손상의 위험이 훨씬 낮고 거의 동등한 pull-out강도를 갖는다는 것이다. 또한, 수술시 방사선 영상을 사용할 수 없을 때, 훈련과 축적된 경험에 의해 나사못 삽입의 정확성과 안전성이 향상될 수 있다.

  • PDF

급성 요통을 일으킨 결핵과 통풍이 혼재된 척추관절병증 (Acute Low Back Pain from Coexisting Gout and Tuberculous Spondyloarthropathy)

  • 박융;하중원;권지원;엄광식
    • 대한정형외과학회지
    • /
    • 제56권4호
    • /
    • pp.351-356
    • /
    • 2021
  • 부고환 결핵으로 부고환 절제술 및 항결핵제제를 복용중인 67세 남자 환자가 급성 요통 및 방사통을 주소로 내원하였다. 환자는 통풍의 과거력은 없었으나 혈액 검사상 고요산혈증 소견을 보였으며, 요추 후관절 및 후궁 부위의 골 파괴 병변이 관찰되었다. 요추 후관절 부위의 컴퓨터 단층촬영 유도하 바늘 생검을 실시하여 조직학적 검사를 시행한 결과 통풍성 척추관절병증 및 결핵성 척추염이 진단되었다. 환자는 통풍성 관절염에 대한 보존적 치료를 통해 증상은 호전되었다. 항결핵제제 복용 등 고요산혈증 위험을 가진 환자가 급성 요통을 호소하는 경우 통풍성 척추관절병증을 감별진단해야 하겠다.

척추측만증 유한 요소 모델 자동 생성 프로그램 개발 (Development of a program for Scoliosis FE Model Automatic Generation)

  • 유한규;김영은
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1154-1159
    • /
    • 2004
  • Unexpected postoperative changes, such as growth in rib hump, has been occasionally reported after corrective surgery for scoliosis. However there has been experimental data for explanation of these changes, nor the suggestion of optimal correction method. This numerical study was designed to investigate the main correlating elements in operative kinematics with post-operative changes of vertebral rotation and rib cage deformation in the corrective surgery of scoliosis. To develop a scoliotic spine model automatically, a special program for converting normal spine model to scoliotic spine model was developed. A mathematical finite element model of normal spine including rib cage, sternum, both clavicles, and pelvis was developed with anatomical details. The skeletal deformity of scoliosis was reconstructed, by mapping the X-ray images of a scoliosis into this three dimensional normal spine and rib cage model. The geometric mapping was performed by translating and rotating the spinal colume with the amount analyzed from the digitized 12 built-in coordinate axes in each vertebral image. By utilizing this program, problems generated in mapping procedure such as facet joint overlapping, vertebral body deformity could be automatically resolved.

  • PDF

척추 인공디스크 수술의 생체역학적 평가 (Biomechanical Evaluation of Total Disc Replacement in Spine)

  • 최대경;박원만;김윤혁
    • 한국콘텐츠학회:학술대회논문집
    • /
    • 한국콘텐츠학회 2011년도 춘계 종합학술대회 논문집
    • /
    • pp.267-268
    • /
    • 2011
  • 본 연구에서는 유한요소 해석 방법을 이용하여 경추 유한요소 모델을 개발하고, 척추 인공디스크 수술 후 경추 분절의 생체역학적 특성을 평가하였다. 반구속 및 비구속 개념의 인공디스크가 삽입된 경추 유한요소 모델의 제 7 경추체를 완전히 고정시키고 추적 경로 방향의 50 N의 압축력을 가한 상태에서 1 Nm의 굴곡과 신전, 측면 굴곡, 비틀림 모멘트를 가하였다. 모든 방향의 하중 조건에서 인공디스크가 삽입된 경추 모델들의 회전량이 정상 경추 모델의 회전량에 비하여 크게 나타났다. 또한 인공디스크를 삽입한 운동 분절에서 정상에 비하여 후관절의 접촉력과 여섯 가지 주요 인대에 걸리는 응력이 높게 나타났다. 본 연구의 결과는 척추 인공디스크 수술 시 수술 방법의 선택뿐만 아니라 새로운 경추 수술용 임플란트 개발을 위한 인체정보 콘텐츠를 구축하는데 유용하게 활용될 수 있을 것으로 기대된다.

  • PDF

신경뿌리병증을 동반한 요추 추간판탈출증 환자의 봉약침 후관절 심부시술 효과에 대한 증례 보고 (A Case Report of Bee Venom Pharmacopuncture Therapy at Facet Joint for the Two Patients with Herniated Intervertebral Disc of Lumbar Spine)

  • 옥소윤;손수아;이유진;신민섭
    • 한방재활의학과학회지
    • /
    • 제27권4호
    • /
    • pp.155-161
    • /
    • 2017
  • The purpose of this study is to research and report the effect of Bee Venom pharmacopuncture therapy at facet joint for the two patients who was diagnosed as herniated intervertebral disc (HIVD) of lumbar spine. Two patients were hospitalized and treated with Complex Korean Medical treatment such as acupuncture, herbal medicine and Essential bee venom (EBV) pharmacopuncture in Dongsuwon hospital of oriental medicine. We measured their pain and function of daily life by numerical rating scale (NRS), straight leg rasing test (SLRT), Roland-morris disability questionnaire (RMDQ). As the result, we found the improvement of gait disturbance, functional disorder, and pain. This study suggested that Bee Venom pharmacopuncture therapy at facet joint is considered to conservative treatment for HIVD of lumbar spine. But further clinical studies are needed to clarify the effect of Bee Venom pharmacopuncture therapy at facet joint for the two patients with HIVD of lumbar spine.

인공 추간판 적용으로 인한 인접 운동 분절의 영향 (Effects on the Adjacent Motion Segments according to the Artificial Disc Insertion)

  • 김영은;윤상석
    • 한국정밀공학회지
    • /
    • 제24권8호통권197호
    • /
    • pp.122-129
    • /
    • 2007
  • To evaluate the effect of artificial disc implantation and fusion on the biomechanics of adjacent motion segment, a nonlinear three-dimensional finite element model of whole lumbar spine (L1-S1) was developed. Biomechanical analysis was performed for two different types of artificial disc, ProDisc and SB $Charit{\acute{e}}$ III model, inserted at L4-L5 level and these results were also compared with fusion case. Angular motion of vertebral body, forces on the spinal ligaments and facet joint under sagittal plane loading with a compressive preload of 150 N at a nonlinear three-dimensional finite element model of Ll-S1 were compared. The implant did not significantly alter the kinematics of the motion segment adjacent to the instrumented level. However, $Charit{\acute{e}}$ III model tend to decrease its motion on the adjacent levels, especially in extension motion. Contrast to motion and ligament force changes, facet contact forces were increased in the adjacent levels as well as implanted level for constrained instantaneous center of rotation model, i.e. ProDisc model.

유한요소 모델을 이용한 충격력에 따른 경추부의 응답특성 해석 (Impact Analysis of the Cervical Spin using a Finite Element Model)

  • 김영은;박덕용;이춘기
    • 한국자동차공학회논문집
    • /
    • 제7권5호
    • /
    • pp.249-257
    • /
    • 1999
  • A three dimensional finite model of a human neck has been developed in an effort to study the mechanics of cervical spin while subjected to vertical impact. This model consisting of the vertebrae from C1 through C7 including posterior element and ligaments was constructed by 2mm thick transverse CT cross-sections and X-ray film taken at lateral side. Geometrical nonlinearity was also considered for the large deformation on the disc. ABAQUS package was used for calculation and its results were verified comparing with responses of a model under static loading condition with published in-vitro experimental data. There were more cervical fracture in the restrained (compression) mode than in the nonrestrained (flexion-compression and extension-compression) mode. Upper cervical(C1-C2) injuries were observed under compression-extension modes, while lower cervical injuries occurred undjer compression-flexion modes. Posterior ligament distraction without bony damage at the upper cervical spin(C1-C2) were observed secondary to C5-C7 trauma in compression-flexion modes.

  • PDF

후관절 증후군의 침 치료에 대한 문헌 연구 보고 (Acupuncture for Facet Joint Syndrome: A Review of Clinical Study)

  • 구지향
    • 한방재활의학과학회지
    • /
    • 제33권1호
    • /
    • pp.13-29
    • /
    • 2023
  • Objectives To evaluate the evidence supporting the effectiveness of acupuncture for facet joint syndrome. Methods We conducted search across 9 electronic databases (PubMed, EMBASE, Cochrane CENTRAL (CENTRAL), KoreaMed, Kmbase, Koreanstudies Information Service System (KISS), ScienceOn, China National Knowledge Infrastructure (CNKI), and Wanfang) to find clinical trials that used acupuncture as treatment for facet joint syndrome. The methodological quality of randomized controlled clinical trials (RCTs) were assessed using the Cochrane Risk of Bias (RoB) tool, while non-randomized controlled clinical trials (nRCTs) were assessed using the Cochrane Risk of Bias Assessment tool for Non-randomized Study (RoBANS) tool. Results Nine RCTs and one nRCT met our inclusion criteria. Fire needle was more effective than medial branch block in terms of visual analogue scale (VAS) after 1 month (p=0.02). Also, Fire needle was more effective than Ibuprofen in terms of VAS and oswestry disability index (ODI) (p<0.05). However, in the rest of the study results, the intervention group did not show a statistically significant difference than the control group. Conclusions Although our review found encouraging but limited evidence of acupuncture for facet joint syndrome, most of the studies included in the analysis were evaluated as methodologically high risk of bias. From now on further well-designed RCTs should be encouraged.

경추성 방사통을 가진 만성통증환자에서 경추 후관절에 대한 투시영상하 중재적 미세유착 박리 및 신경자극요법의 임상적 효과 (Clinical Effects of Fluoroscopy Guided Interventional Microadhesiolysis and Nerve Stimulation (FIMS) on Cervical Zygapophyseal Joints in Patients with Chronic Cervical Radicular Pain)

  • 김은하
    • The Korean Journal of Pain
    • /
    • 제20권1호
    • /
    • pp.31-39
    • /
    • 2007
  • Background: Cervical radicular pain can arise fromvarious structures, including spinal nerves, discs, zygapophyseal joints, ligaments, and myofascial connective tissue. However, no adequate experiments have been found regarding methods for the microadhesiolysis of adhesional connective tissue around the zygapophyseal joints and nerves. The first objective of this study was to ascertain the effect of fluoroscopy guided interventional microadhesiolysis and nerve stimulation (FIMS) on chronic cervical radicular pain caused by zygapophyseal joint dysfunction. The second objective was to identify the duration of pain alleviation, as well as commonly occurring regions for zygapophyseal joint dysfunction. Methods: Twenty-eight patients were diagnosed with cervical radicular pain. The cervical zygapophyseal joints and adhesional structures around the cervical zygapophyseal joints were stimulated by adhesiolysis with a rounded needle; the procedure was performed once every second week. A visual analogue scale (VAS) for pain and neck range of motion (ROM) were used as indices for evaluating the degree of pain 1 and 3 months after completion of the procedures. A relief effect of FIMS was accepted when the VAS index decreased 50% compared with a previous VAS, and when there was absence of limitation of ROM. Results: Among the patients, 52% showed zygapophyseal joint dysfunction in C5-6, 38% in C4-5, 7% in C2-3, and 3% in C6-7. After performing FIMS, the VAS index decreased in most of the patients after 1 and 3 months (92.8% and 75%, respectively), and treatment frequency was $2.7{\pm}1.2$. There was no correlation between the number of FIMS procedures and the degree of VAS. Conclusions: FIMS is considered an effective modality in patients suffering from cervical radicular pain.

초음파 유도하에서의 요추부 후관절 내측지 차단술을 위한 주요 척추 구조물의 거리 측정 (Ultrasound-guided Distance Measurements of Vertebral Structures for Lumbar Medial Branch Block)

  • 문진천;심재광;조광연;윤경봉;김원옥;윤덕미
    • The Korean Journal of Pain
    • /
    • 제20권2호
    • /
    • pp.111-115
    • /
    • 2007
  • Background: Selective diagnostic blocks of the medial branches of the dorsal primary ramus are usually performed under the guidance of fluoroscopic or computed tomography. Recently, however, ultrasound guidance has been suggested as an altemative method. In this study, the distances between the vertebral structures were measured and compared with the values measured using magnetic resonance imaging (MRI) to assess the clinical feasibility of using ultrasound-guided block in Korean patients. Methods: Five male and 15 female patients were enrolled in this study. The target point of the medial branch block in our study was the groove at the base of the superior articular process, We measured the depth from the skin to the target point at the transverse process (d-TP) and to the most superficial point of the superior articular process (d-AP). Results: The d-TP and d-AP values measured under ultrasound guidance were concordant with the values measured using MRI. Conclusions: The images of the bony landmarks obtained under ultrasound examination could be useful for ultrasound-guided lumbar medial branch block.