• Journal of Energy Engineering
• /
• v.29 no.2
• /
• pp.68-78
• /
• 2020

According to the new climate change agreement, technology development to reduce greenhouse gases is actively conducted worldwide, and research on energy efficiency improvement in the field of power generation and transmission and distribution is underway [1,2]. Economic analysis of the operation method of storing and supplying surplus electricity using energy storage devices, and using energy storage devices as a frequency adjustment reserve power in regional cogeneration plants has been reported as the most profitable operation method [3-7]. Therefore, this study conducted an economic analysis for the installation of energy storage devices in the combined heat and power plant in the Czech Republic. The most important factor in evaluating the economics of battery energy storage devices is the lifespan, and the warranty life is generally 10 to 15 years, based on charging and discharging once a day. For the simulation, the ratio of battery and PCS was designed as 1: 1 and 1: 2. In general, the primary frequency control is designed as 1: 4, but considering the characteristics of the cogeneration plant, it is set at a ratio of up to 1: 2, and the capacity is simulated at 1MW to 10MW and 2MWh to 20MWh according to each ratio. Therefore, life was evaluated based on the number of cycles per year. In the case of installing a battery energy storage system in a combined heat and power plant in the Czech Republic, the payback period of 3MW / 3MWh is more favorable than 5MW / 5MWh, considering the local infrastructure and power market. It is estimated to be about 3 years or 5 years from the simple payback period considering the estimated purchase price without subsidies. If you lower the purchase price by 50%, the purchase cost is an important part of the cost for the entire lifetime, so the payback period is about half as short. It can be, but it is impossible to secure profitability through the economy at the scale of 3MWh and 5MWh. If the price of the electricity market falls by 50%, the payback period will be three years longer in P1 mode and two years longer in P2 and P3 modes.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.3
• /
• pp.246-253
• /
• 2007

This study was performed to enhance the cleanup efficiency of methoxyfenozide and bentazone by pH adjustment in the course of liquid-liquid partition and to develop an optimum analytical conditions using HPLC coupled with DAD for two matrices, brown rice and rice straw. Preparation procedure of brown rice sample was "extraction${\rightarrow}$coagulation${\rightarrow}$liquid-liquid partition$\rightarrow$-florisil C.C", and this procedure was samely applied to two compounds. In rice straw, preparation procedure of methoxyfenozide sample was "extraction$\rightarrow$-alkalization$\rightarrow$liquid-liquid extraction$\rightarrow$coagulation$\rightarrow$florisil C.C", and in the case of bentazone, "extraction$\rightarrow$alkalization$\rightarrow$liquid-liquid partition$\rightarrow$acidification$\rightarrow$liquid-liquid extraction$\rightarrow$florisil C.C". All these purified samples were redissolved in the mobile phases, acetonitile : 20 mM sodium acetate (75:25, v/v) for methoxyfenozide and acetonitrile : 75 mM sodium acetate, pH 6.0 (40:60, v/v) for bentazone. Recoveries of methoxyfenozide analysis in brown rice and rice straw were 83.5-97.4 and 86.4-97.3%, and detection limits were 0.02 and 0.04 mg/kg, respectively. Recoveries of bentazone in brown rice and rice straw were 86.8-101.9 and 88.3-94.5% and detection limits were 0.005 and 0.01 mg/kg, respectively. This methods seem to be usefully applied to the residue analysis of two compounds in the view of producing stable analytical condition and fair reproducibility.

• Solar Energy
• /
• v.20 no.2
• /
• pp.43-54
• /
• 2000

We prepared and characterized $Cu(In_{1-x}Ga_x)Se_2$(CIGS) films using a elemental co-evaporation method for absorbing layer of high efficiency thin film solar cells. The CIGS films deposited on a soda-lime glass exhibited low resistivity because of higher carrier concentration. Na was accumulated at the CIGS surface and the 0 and Se were also accumulated at the surface, suggesting that oxidation is a driving force of Na accumulation. The structure of CIGS film was modified or a secondary phase was formed in the Cu-poor CIGS bulk films probably due to the incorporation of Na into Cu vacancy sites. As the Ga/(In+Ga) ratio increased, the diffraction peaks of $Cu(In_{1-x}Ga_x)Se_2$ films were shifted to larger angle and splitted, and the grain size of $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films became smaller. All $Cu_{0.91}(In_{1-x}Ga_x)Se_2$ films showed the p-type conductivity regardless of the Ga/(In+Ga) ratio. Ag/n-ZnO/i-ZnO/CdS/$Cu_{0.91}(In_{0.7}Ga_{0.3})Se_2$/Mo solar cells were fabricated. The currently best efficiency in this study was 14.48% for $0.18cm^2$ area ($V_{oc}=581.5mV,\;J_{sc}=34.88mA$, F.F=0.714).

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.41-49
• /
• 2009

This research conducted a survey on the feeding crane's size, formation and distribution distance subsequent to road pattern and feeding flock's size during the wintering season eight times at the Cheolwon basin in Korea from December 2005 until February 2006. The survey results are as follows: First, the feeding flocks of the Red-crowned and White-naped Crane were found to mainly consist of two to four individuals. Mono-specific feeding flocks were more identified than hetero-specific feeding flocks in both Red-crowned and White-naped Cranes. There existed a significant difference in the ratio by size between the feeding Red-crowned and White-naped Cranes. The crane's average distribution distance from the paved road was much farther than from the unpaved road, paved farm road and unpaved farm road. In case of the white-naped crane, there was a difference in its distance length from between the road and farm road and there existed a significant difference only in the paved road in the distance length by road pattern between these two bird species[Red-crowned and White-naped Crane]. Such a result indicates that crane species don't prefer the road with frequent vehicular traffic to the road with low vehicular traffic. 5 or more individuals of feeding flocks of the Red-crowned Crane were located at a farther distance length from the paved road comparing to less than 5 individuals of the whole feeding flocks and less than 5 individual feeding flocks. 5 or more individuals of feeding flocks of the White-naped Crane were located at a farther distance length from the paved road, paved farm road and unpaved farm road than less than 5 individuals of feeding flocks of the White-naped Crane; however, there existed no difference in distance length subsequent to their group size. Conclusively, it was found out that the flocks with a larger size were more greatly affected by interrupting factors. Considering such results, there seems to be a more relation to the fact that larger size feeding flocks of crane species have a higher efficiency in the lookout for their surroundings.

• Korean Journal of Plant Resources
• /
• v.25 no.2
• /
• pp.225-231
• /
• 2012

To figure out optimum culturing condition for $in$ $vitro$ yam ($Dioscorea$ $opposita$ Thunb.) production, various media components and environmental controls were evaluated, effective temperature, light condition and timing of the liquid media replacement for multiplication of yam in liquid culture were determined in this study. There was no visible difference detected for $15^{\circ}C$ and $25^{\circ}C$ temperature conditions. At $25^{\circ}C$, continuous light condition was more effective compared to 16 hour light/ 8 hour dark condition. Effect of media replacement was tested, and approximately 5 more microtubers obtained and 70% of increase in weight was detected when media replacement was performed. Timing for media replacement was tested at 2, 4, 6, 8, and 10 weeks after initial culture for 12 weeks. Considering both number and weight of microtubers, replacement of media 6 weeks after initial culture was most effective. In terms of component of media, significant increase in weight of microtubers was observed in MS media containing sucrose $60g{\cdot}L^{-1}$. In summary, the most effective condition for $in$ $vitro$ propagation of chinese yam is replacing medium 6 weeks after initial inoculation with MS medium containing sucrose $60g{\cdot}L^{-1}$ in continuous light condition.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.325-334
• /
• 2008

The standard prestressed concrete I-girder bridge (PSC I-girder bridge) is one of the most prevalent types for small and medium bridges in Korea. When determining the member forces in a section to assess the safety of girder in this type of bridge, the general practice is to use the simplified practical equations or the live load distribution factors proposed in design standards rather than the precise analysis through the finite element method or so. Meanwhile, the live load distribution factors currently used in Korean design practice are just a reflection of overseas research results or design standards without alterations. Therefore, it is necessary to develop an equation of the live load distribution factors fit for the design conditions of Korea, considering the standardized section of standard PSC I-girder bridges and the design strength of concrete. In this study, to develop an equation of the live load distribution factors, a parametric analysis and sensitivity analysis were carried out on the parameters such as width of bridge, span length, girder spacing, width of traffic lane, etc. As a result, the major variables to determine the size of distribution factors were girder spacing, overhang length and span length in case of external girders. For internal adjacent girders, the determinant factors were girder spacing, overhang length, span length and width of bridge. For internal girders, the factors were girder spacing, width of bridge and span length. Then, an equation of live load distribution factors was developed through the multiple linear regression analysis on the results of parametric analysis. When the actual practice engineers design a bridge with the equation of live load distribution factors developed here, they will determine the design of member forces ensuring the appropriate safety rate more easily. Moreover, in the preliminary design, this model is expected to save much time for the repetitive design to improve the structural efficiency of PSC I-girder bridges.

• Polymer(Korea)
• /
• v.30 no.6
• /
• pp.498-504
• /
• 2006

A suspension polymerization of styrene In aqueous phase was employed to study if polystyrene particles ranging from 1 to $20{\mu}m$ can be produced. Hydrophobic silica was selected as a stabilizer and azo-bisisobutyronitrile (AIBN) as an initiator. Polymerization reaction was carried out at a selected temperature in the range of $65{\sim}95^{\circ}C$. Stabilizer concentration was varied from 0.17 to 3.33 wt% compared to the water while the concentration of the initiator was raised from 0.13 to 6.0 wt% compared to the monomer. Dispersion of hydrophobic silica into the water phase was achieved by precise control of pH. Optimum dispersion of silica was obtained at pH 10. Average particle diameter decreased with increasing amounts of stabilizer concentration initially, exhibiting the minimum average diameter at 1.67 wt% of stabilizer concentration, after which it started to Increase. It is speculated that an excessive presence of stabilizer encouraged a secondary reaction in the reaction medium, which led to particle agglomeration, and as a result an increase in average particle diameter. Molecular weight was found to be independent of stabilizer concentration between 0.13 and 1.00 wt% whereas, it increased when stabilizer concentration exceeded 1.67 wt%. Variation of molecular weight was probably caused by the reduced activity and efficiency of initiator due to the high concentration of silica, and the secondary reaction in the reaction medium, as well. An increase in the Initiator concentration and/or reaction temperature resulted in an increase in both reaction rate and particle diameter. Consequently, we have confirmed that spherical polystyrene particles with $1{\sim}20{\mu}m$ in diameter can be prepared by careful selection of the concentration of stabilizer, initiator, pH and reaction temperature.

• Radiation Oncology Journal
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2004

Purpose : To evaluate the reflection of tumor motion according to the planning CT scan time. Material and Methods : A model of N-shape, which moved aiong the longitudinal axis during the ventilation caused by a mechanical ventilator, was produced. The model was scanned by planning CT, while setting the relative CT scan time (T: CT scan time/ventilatory period) to 0.33, 0.50, 0.67, 0.75, 1.00, 1.337, and 1.537. In addition, three patients with non-small cell lung cancer who received stereotactic radiosurgery In the Department of Radiation Oncology, Asan Medical Center from 03/19/2002 to 05/21/2002 were scanned. Slow (10 Premier, Picker, scan time 2.0 seconds per slice) and fast CT scans (Lightspeed, GE Medical Systems, with a scan time of 0.8 second per slice) were peformed for each patient. The magnitude of reflected movement of the N-shaped model was evaluated by measuring the transverse length, which reflected the movement of the declined bar of the model at each slice. For patients' scans, all CT data sets were registered using a stereotactic body frame scale with the gross tumor volumes delineated in one CT image set. The volume and three-dimensional diameter of the gross tumor volume were measured and analyzed between the slow and fast CT scans. Results : The reflection degree of longitudinal movement of the model increased in proportion to the relative CT scan times below 1.00 7, but remained constant above 1.00 T Assuming the mean value of scanned transverse lengths with CT scan time 1.00 T to be $100\%$, CT scans with scan times of 0.33, 0.50, 0.57, and 0.75 T missed the tumor motion by 30, 27, 20, and $7.0\%$ respectively, Slow (scan time 2.0 sec) and Fast (scan time 0.8 sec) CT scans of three patients with longitudinal movement of 3, 5, and 10 mm measured by fluoroscopy revealed the increases in the diameter along the longitudinal axis Increased by 6.3, 17, and $23\%$ in the slow CT scans. Conculsion : As the relative CT scan time increased, the reflection of the respiratory tumor movement on planning CT also Increased, but remained constant with relative CT scan times above 1.00 T When setting the planning CT scan time above one respiration period (>1.00 T), only the set-up margin is needed to delineate the planning target volume. Therefore, therapeutic ratio can be increased by reducing the radiation dose delivered to normal lung tissue.

• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.64-77
• /
• 2002

DR has had an important fact not only in the department of radiology but also in productivity or work efficiency of a whole hospital. The environment of DR has more various parameter than CR, so it is able to supply high quality of medical services. The current environment of radiology department in each hospital has been changed from Film-Screen system to DR through Full-PACS. This hospital which uses Full-PACS became to study the proper condition of CR and DDR and how the image quality of them is expressed among general photographing systems in the DR environment. From this experiment, the image quality of DDR is better than CR under the same exposure condition. And in the DDR system, the score of image which uses AEC is a little higher than the score which doesn't use it. Especially it can be known that the function of AEC of DDR is useful to improve the image quality in the part of skull and chest. (The function of AEC : It is the tool that detects the ionized current of x-ray which goes through objects with using the ion chamber which is in the detector. Also it controls the examination of X-ray when the proper density is reached.) Because the proper degree of density can be represented by this system, the photographing can be taken much easily without consideration of the exposure condition with the thickness of various objects. From the result of this experiment, it can be known that the selection of proper exposure condition plays an important rule to gain good Image Quality. More researches will be necessary about DDR system which has potential ability in the future.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.532-538
• /
• 1994

In order to investigate the lowering effects of in vitro enzymatic hydrolysis by the treatment of chymotrypsin, trypsin, pancreatin, or protease from Aspergillus oryzae on the antigenicity of whey protein(WPI) against rabbit anti ${\beta}-LG$ antiserum, competitive inhibition ELISA(cELISA) and passive cutaneous anaphylaxis(PCA) test using guinea pig were performed. The results of cELISA showed that the monovalent antigenicity of the whey protein hydrolysates(WPH) to the antiserum was decreased to $10^{-1.7}{\sim}10^{-4.1}$ and less by the hydrolysis. Especially, the antigenicity of OUP(hydrolysate by protease from Asp. oryzae with preteatment of pepsin) was found almost to be removed. By the heterologous PCA the polyvalent antigenicity of the WPH was decreased to $1/2{\sim}1/128$ and less. Especially, the polyvalent antigenicity of OUN(hydrolysate by protease from Asp. oryzae without preteatments) was found almost to be removed, although OUN did not have so high degree of hydrolysis(DH) or so low monovalent antigenicity (reduced to $10^{-3.2}$). Therefore, this result was assumed to come from effective destruction of antigenic determinants on ${\beta}-LG$ in WPI, not to produce polyvalent antigenic peptides that are closely associated with induction of allergy. This finding suggested that WPH prepared by the treatment of microorganic protease from Asp. oryzae would be a material for hypoallergenic infant formula due to the removal of the polyvalent antigenicity of ${\beta}-LG$, the major milk allergen in WPI.